Nakladalec na kolesih

Schäffer Lader Typ 1622

Stanje: rabljeno, Leto izdelave: 2024, Comfort seat MSG 65, LED work light set 80, towing device with pin and lashing eyes, standard tires 23x8.50-12 AS, offset 60 mounting frame / yard loader attachment WS type SWH hydraulic light material bucket mini, square 0.90 m, 315 l with operator protective roof K Bedpfx Afjtt Ap Teqelr

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 365 h, številka stroja/vozila: 36374, vrsta goriva: dizel, Lastna teža: 3.425 kg Dvižna zmogljivost: 250 kg Delovna višina: 2.700 cm Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Maks. horizontalni doseg: 1.700 m Blsdpfsvf T U Tsx Afqor Transportne mere (D x Š x V): 7,69 x 2,2 x 2,98 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rdeča, lastna masa: 2.150 kg, dvižna moč: 980 kg/m, dvižna višina: 2.500 mm, velikost pnevmatike: 31X15,5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, The H&R Wheel Loader 2210-B35 (Wide Track) – a compact loader with a wide track for increased stability. The new 3-cylinder Perkins turbo engine with 18.5 kW (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the compact loader 2210 B35 reaches approximately 16 km/h and is easy to operate. Thanks to the large steering angle of 42° and a small turning radius, it is very well suited for operation in confined spaces. The yard loader comes standard with a pallet fork and a standard bucket, so you can start working immediately. With the 3rd and 4th hydraulic control circuits, a variety of attachments can be operated. The hydraulic quick coupler allows fast and convenient changing of front attachments. With high lifting capacity, the HR 2210 loader can also lift heavy loads of up to 980 kg to a height of 2.53 m. Standard wide tires (31x15.5-15) provide especially secure footing. The E-shift on the joystick ensures particularly comfortable operation of the HR 2210-B35. H&R loaders are technically and visually optimized in-house and thoroughly tested. Each machine additionally receives comprehensive corrosion protection treatment. Bedpfxsrhh Sqe Afqslr Our loaders are CE-compliant according to the EU Machinery Directive. We provide a TÜV Süd certificate for each machine, enabling individual operating approval according to §21 StVZO (road registration / operating permit as a self-propelled working machine). Key Features of the H&R 2210-B35 Wheel Loader • Full equipment • Wide track for greater stability • Extensively optimized in Germany • Pallet fork included, manually adjustable • 150 cm standard bucket included • Comfort cab with heating, ventilation, and radio • Rear view camera with display • Joystick with float function and E-shift • Additional hydraulics for front attachments, 3rd and 4th circuit • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for towing • Rotating beacon • LED work lights front & rear • Wide tires 31 x 15.5 -15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE-compliant according to EU machinery directive • 1 year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 Gross: €27,304.55 Financing possible! Optional 2-year warranty €590.00 TÜV road registration / operating permit for working machine €595.00 Transport within Germany and Austria available at extra charge Technical Data Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Dump height: 1956 mm (standard bucket, tipped) Lift / Lower time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories available. Please provide your phone number with inquiries!

Stanje: rabljeno, Leto izdelave: 2024, Tow bar with pin, standard tires 23x8.50-12 AS, offset 60 / Mounting frame for yard loader WS type SWH, hydraulically operated light material bucket, mini, square, 0.90 m, / 315 l with driver protection canopy, Kubota diesel engine D902, 16.2 kW = 22 HP First Edition equipment Bodpfx Aerxr N Uofqslr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 237042, moč: 25 kW (33,99 KM), skupna masa: 1.575 kg, vrsta goriva: električni, barva: rumena, From personal experience: The battery easily lasts a full workday under continuous operation. Internal ID: M1241 Manufacturer: Schliesing Chassis type: Trailer chassis Drive type: Electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – Torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Net weight (kg): 1575 Features: Power Control System – WhisperCut chipping system Blsdpfxsvmz N Uo Afqsr The Schliesing mid-class is now also available as an electric chipper – the Schliesing 325MX-E chipper. The powerful brushless asynchronous motor delivers 25 kW and 120 Nm torque, ensuring productive work with proven throughput performance. The batteries are designed to allow operation for an entire workday without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity with logs up to 20 cm in diameter. Motor and Chassis: - Brushless asynchronous motor with 25 kW and 120 Nm torque - Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h, including EU homologation - Robust, fixed, and widened steel mudguards - Heavy-duty front jockey wheel and rear support stand - Tow hitch with overrun brake and Soft-Dock ball coupling or DIN towing eye - LED lighting according to StVZO (shock-protected) - Pneumatic tires 205/65 R15 C Battery: - LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V - Enables full-day operation of the chipper without recharging. No intermediate recharging required even after long standstill periods - Energy recuperation via recovery of kinetic energy from the chipping disc during operation - Charging port: Schuko plug 220-240V/16A - Charging time for full charge: 8 hours - Warranty for 1000 charge cycles at 80% SOH (State of Health) Housing/Chute/Discharge Spout: - Foldable infeed chute with minimum input depth of 1,500 mm - Fully galvanized, corrosion-resistant chute flap - Chute dimensions (inner): Width = 1,040 mm, Height = 960 mm - Swivel-mounted discharge spout with adjustable deflector - Discharge spout on ball bearing turntable - Key machine parts acoustically insulated (especially chipper hood and discharge spout) - Two emergency stop buttons on top of the chute and on the side of the chute flap Chipping Unit: - Chipping system with safety circuit to EN 13525 - Robust chipping disc Ø 655 mm, 35 mm thick - Enclosed knife system for fast, safe, and precise knife changes - Continuously adjustable chipper knives - Knives can be re-sharpened multiple times for a long service life (approx. 10x) - Horizontally usable counter-blade and vertically usable counter-cutter, each with two cutting edges for long service life - Wrapping protection on the main bearing of the chipping disc Hydraulic Feed: - Feed control with independent hydraulic circuit - PowerGrip feed roller, 240 mm wide, with hydraulic feeding. Particularly grippy, aggressive, and uniform feeding thanks to a dedicated hydraulic motor per roller - Parallel-guided upper roller for constant, even feed, preventing jamming of input material - Feed speed (and thus chip size) hydraulically adjustable - Hydraulic oil tank with level indicator OPTIONS SUMMARY: WhisperCut® - V-shaped blades pull the wood in more evenly and with less vibration - In combination with the centering PowerGrip roller, chipping material is barely able to swing back and forth

Stanje: novo, Leto izdelave: 2024, moč: 18 kW (24,47 KM), _____Schäffer nakladalnik tip 2024 z ROPS zaščitno streho za voznika, Kubota Diesel motor D1105, hidravlična zapora orodja, zadržni sistem in navodila za uporabo. Posebna oprema: vlečna naprava s čepom in pritrdilnimi ušesi, serijske pnevmatike 7.00-12 ET 40 AS, pritrdilni okvir tipa SWH, hidravlična DVOJNI zapora. Lokacija: 54595 Prüm. Bsdou Ebkajpfx Afqolr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), Prodam popolnoma delujočo linijo za proizvodnjo peletov. Blsdpfx Asw Ry U Isfqor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, moč: 33 kW (44,87 KM), skupna masa: 1.570 kg, vrsta goriva: dizel, barva: originalen, konfiguracija osi: 1 os, gorivo: dizel, Schliesing 325EX-D Wood Chipper: The Compact Unit with Rotatable Chipping Assembly The Schliesing 325EX-D wood chipper is a powerful machine designed for demanding wood chipping applications. Featuring a robust engine, versatile feed options, and durable construction, it is ideally suited for tough jobs. The swivel-mounted infeed hopper and comprehensive safety features ensure compliance with top-tier standards, making it an efficient solution for processing logs up to Ø 20 cm. Technical Specifications: Type: Schliesing 325 EX Log diameter capacity: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and Chassis: - Water-cooled, Stage V 4-cylinder Kubota common-rail turbo diesel engine with DPF, outputting 33 kW / 44.9 HP - Industrial overrunning clutch between engine and flywheel protects engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis rated for speeds up to 80 km/h with EU type approval - Heavy-duty, fixed steel mudguards - Support wheel at the front and support leg at the rear - EU-compliant lighting system with impact-protected components - 205/65 R15C pneumatic tires with EU type approval Body/Hopper/Discharge Chute: - Foldable infeed hopper with minimum feed depth of 1,500 mm - Fully galvanized hopper flap for long service life - Hopper internal dimensions: width = 1,040 mm, height = 960 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on a ball bearing slew ring for flexible orientation - Sound insulation on critical machine components such as the chipper hood and discharge chute - Emergency stop button on top of the hopper and on the side of the hopper flap Chipping Unit: - Rotatable chipping housing with adjustable feed angle up to 270° - Safety interlock in accordance with EN 13525 - Chipping disc with diameter Ø 655 mm and thickness 35 mm Bodpfov Ev E Usx Afqslr - Enclosed knife system enables fast, safe blade changes - Steplessly adjustable chipper blades, can be resharpened multiple times for extended service life - Horizontal counter-blade and vertical counter-edge each usable on two sides for high durability - Anti-wrap protection at the flywheel’s main bearing Hydraulic Feed: - Dedicated hydraulic circuit for feed control - PowerGrip feed roller (240 mm wide) with hydraulic feed ensures reliable, even material transport - Parallel upper roller guide prevents skewed feeding - Hydraulically adjustable feed speed for chip size regulation - Hydraulic oil tank level indicator

Stanje: rabljeno, številka stroja/vozila: 050189, for groove width: 13 - 30 mm for groove depth: 22 - 35 mm Bljdpfjb Amlhex Afqjr Milling cutter speed approx.: 1200 rpm Drive motor: AC 220 V, 1020 W Weight: approx. 6 kg

Stanje: rabljeno, Leto izdelave: 2024, incl. central lubrication system socket, Beka-Max. LED work lights (2 front / 2 rear). Sliding window, left door. Earthmoving bucket (1.08 m³, 2150 mm wide) with reversible bolt-on edge. Sliding window, right door. Telescopic wheel loader – 40 km/h high-speed version. Blsdotq Exljpfx Afqjr