Industrijski kotel za toplo vodo 3 Giga

Sceat Beta MTN

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Nwsdpfewhmdfjx Ag Toc Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Allgaier Screening Machine | Flat Screen Type ARSM 33-10 overhauled (workshop-refurbished) - Manufacturer: Allgaier - Type: ARSM 33-10 - Year of manufacture: 2005 - Condition: overhauled - Screening capacity: up to approx. 200 - 220 srm/h (with wood chips and sawdust) - Screening area: 10.0 m² x 2 = 20 m² per mesh size - Fractions: 3 - Screen decks: 4 units + 1 intermediate floor - Drive power: 7.5 kW - Dimensions (L x W x H): 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 reseda green - Screen inserts selectable - Outlet layout according to customer requirements Screening machine overhauled. Pendulum roller bearings and suspension struts are new. Suitable, among others, for screening the following bulk materials: - Wood chips - Sawdust and wood shavings Nwedpfoq Iivasx Ag Tjc - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Oscillating screen machine | Stationary screen | Flat screen | Plansifter | Oscillating screener | Roll sifter | Screening machine for wood chips

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Nwjdpfod Dhw Nox Ag Toc Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood Nwjdpsw Sy T Hofx Ag Toc System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Njdpfx Ajtuyr Ieg Towc Hydraulic milling head. 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: dober (rabljeno), Ostekar fra Landteknik, fuldstændig i rustfrit stål, inkl. indvendig omrører og vallefilter. Kapacitet: 12.000 liter. Vi kan tilbyde to identiske enheder. Nwjdpfxeh D H Urj Ag Toc

Leto izdelave: 2001, obratovalne ure: 123 h, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Nodpfsftdv Usx Ag Towc Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: rabljeno, Leto izdelave: 1993, Häwa stroj za luščenje hlodovine s frezalno glavo H249 / 1000 Nedpfx Agex Rv T Ij Tjwc Leto izdelave 1993 Premer hloda 0,25 m – 1,2 m Dolžina hloda 1,8 m – 7 m Frezalna glava: 30 kW Reduktor korenin: 37 kW Vsebuje: Prečni dovajalni transporter Stroj za luščenje Transportni trakovi Odtokovni transporter

Leto izdelave: 1988, Stanje: rabljeno, Compressor unit Type 178 A CD E Delivery rate: 4,760 l/min Operating pressure: 9 bar Nwodpfegw Dqpsx Ag Toc Power: 30 kW

Stanje: generalkompletno obnovljen (rabljeno), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET Njdpfodvlcysx Ag Tewc GEBRAUCHT, KOMPLETT GENERALÜBERHOLT