Tovornjak z žerjavom

Scania R 730 LB8x2 V8 FASSI F1650 RA.2.28 XHE- DYNAMIC...

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Iodpfx Asfg E Hljdketd Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Itedpfx Asd Iipmsdked Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 8.835 h, nosilnost: 6.000 kg, dvižna višina: 4.000 mm, vrsta goriva: dizel, lastna masa: 9.160 kg, barva: rdeča, Nudimo stranski viličar Jumbo JDQ 60712/52 Itedpfxox Trllj Adkod

Stanje: rabljeno, Število vreten: 10 kos. Ijdpfxew H Iv To Adkjtd Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Iodpfowv Umwox Adkotd

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: Itsdpstwm Ubofx Adked The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11383, vrsta vhodnega toka: trifazni, delovno območje: 3.000 mm, skupna masa: 17.000 kg, vhodna napetost: 400 V, hitrost rezanja: 2.000 mm/min, skupna širina: 4.500 mm, skupna višina: 5.500 mm, skupna dolžina: 22.400 mm, širina gosenic: 1.400 mm, natančnost ponavljanja: 1 mm, teža obdelovanca (maks.): 30.000 kg, trajanje garancije: 6 meseci, vhodna frekvenca: 50 Hz, napetost odprtega kroga: 400 V, okoljska temperatura (maks.): 45 °C, Tweedehands SPC3000 – HGG Profiling Equipment B.V. Bent u klaar om uw werkproces te automatiseren, maar nog niet toe aan een grote investering in pijplasermachines? Wij hebben een interessante optie voor u. Deze SPC3000 (bouwjaar 2014, 40 ton) pijplasermachine is zeer veelzijdig. De machine is geschikt voor het bewerken van buizen met een diameter van 300 mm tot 3000 mm en is voorzien van vele extra’s: • 4x 10-tons pijpentransportwagens (300–2500 mm buitendiameter), waarvan één aangedreven pijpentransportwagen • 2x 20-tons buisondersteuningen (2500–3000 mm buitendiameter) • Plasma-markeersysteem Kjellberg Finemarker • Slagstempel-markeersysteem • Geschikt voor buizen tot 18 meter lengte Iedpfxjri Slme Adketd • Plasma-snijsysteem Kjellberg FF450 • Autogene snijfunctie • Extra touchscreen afstandsbediening aan hoofdaandrijving • 3-punts rookafzuigsysteem De SPC3000 is in gebruik bij ons eXperience Center en wordt onderhouden door onze beste technici op het hoofdkantoor in Nederland. Deze machine heeft zich ruimschoots bewezen in het profileren van buizen voor klanten uit veeleisende sectoren zoals offshore, pijpleidingen, staalconstructies en de scheepsbouw. Veel specialistische projecten zijn met deze machine uitgevoerd.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, For Sale. Ficep Tipo G25LG. Full description attached as a document. Year of manufacture: 2019 The infeed and outfeed lengths for this line are as follows: Infeed: 8 m Outfeed: 8 m If you require additional photos or information, please do not hesitate to contact us. Iodju Dw I Ejpfx Adkjtd

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, DELOVNE DIMENZIJE: 400x250 mm Iodpfx Adjx S E Haskotd 4 STRANI + POSNEMALCI ROBOV

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 1.454 h, številka stroja/vozila: E300007203, konfiguracija osi: 4x4, vrsta goriva: dizel, Oprema: pogon na vsa štiri kolesa, Pogon: Kolesa Lastna teža: 7.920 kg Dvižni steber: Zgibna roka Dvižna zmogljivost: 250 kg Ijdjtr Iywspfx Adketd Delovna višina: 1.800 cm Največji vodoravni doseg: 1.065 m Transportne mere (D x Š x V): 7,77x2,35x2,27 Za dodatne informacije se obrnite na SKUPINO PFEIFER.