11/13/4 Rotor

SBM 11/13/4 Rotor

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device Bedormkfnepfx Altjlk • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Airflow rate 1860 m³/h Vacuum/Pressure 2,900 Pa Drive power 1.1 kW Filter area 10 m² Sound level 72 dB(A) Connection 400/50 V/Hz Space requirement approx. 665 x 1100 x 1495 mm Weight approx. 200 kg Sanders Art. No. 10224980 Extraction unit, welding fume extraction (with automatic cleaning) - Hose arm 3 m, internal joints - Filter cartridge: Dust class M - Pre-filter: Baffle plate - Power supply: 3Ph+N+PE The Filter Unit Blsdpehp S Trofx Altsk ----- The mobile filter unit Cartmaster IFA is particularly suitable for welding applications with unalloyed and alloyed steels, galvanized materials, and aluminium in environments with high fume generation due to its automatic cleaning system. It meets the safety requirements for devices in welding fume class "W3" (high-alloyed steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be operated in recirculation mode, as it fulfills the exception regulations according to TRGS 560. The specifically developed, contamination-dependent cleaning system ensures excellent filter cartridge regeneration, guaranteeing optimal extraction performance throughout operation. The separated particles are collected in a dust drawer, from which they can be properly disposed of. The powerful screw fan maintains high airflow even when the filter cartridge is saturated. Filter Media ----- A baffle plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency >99%) filters the finest fumes and dust particles. The cartridge is factory coated, which increases service life. The Extraction Arm ----- The extraction arm can be effortlessly positioned via its 3 internal, spring-supported joints and remains stable in the selected position. A throttle valve integrated in the extraction hood enables adjustment of the airflow volume.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Bledpfxexn A Sps Altsk Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Leto izdelave: 2026, Blow bars, manganese, unit weight approx. 415 kg, available immediately – subject to prior sale. (Suitable for Pegson Trakpactor 1412, Hazemag AP-PH 1412, MFL 130/130, Kleemann Reiner 132 etc.) Dimensions: approx. 1325 x 360 x 115 mm Bodeuy N R Depfx Altjlk

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Bledpfx Ajy Tn Ntoltok

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: nepreverjeno, skupna višina: 2.000 mm, skupna širina: 2.200 mm, skupna dolžina: 2.900 mm, skupna masa: 1.020 kg, širina odpiranja: 305 mm, največja hitrost vrtenja: 350 obr/min, vrtljajska hitrost (min.): 300 obr/min, delovna širina: 2.100 mm, Cena na zahtevo Bjdpfx Ajzc Hgbjltjlk

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Bedpfxoyrdc So Altolk Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, TEHNIČNI PODATKI: Širina odprtine 200 x 620 mm Letnik 1988 Zmogljivost do 80 t/h Velikost vstopnega kosa 4–70 mm Teža 6081 kg Potrebna moč 90–132 kW Posebnosti nastavljiva mlečna steza Bodpfx Ajzc H Raoltelk Stanje: obnovljeno, obrabni deli zamenjani, peskano, grundirano in lakirano Opcijsko in na zahtevo: vhodni zalogovnik, izhodni zalogovnik, motor, ogrodje, klinasti jermen, zaščita za jermen, elektro omarica z mehkim zagonom ali frekvenčnim pretvornikom, posebni premazi, hidravlični mehanizem za odpiranje