Varilni pozicioner 6t

Sartore PTA 6000

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Cjdpfxoifk Rbj Afqjaa Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Stanje: novo, Leto izdelave: 2022, Protec welding turntable with 10,000 kg load capacity Cjdpod An Aiofx Afqeaa Continuously variable speed control from 0.05 to 0.5 rpm Hand and foot remote control Height: 650 mm Table diameter: 1,800 mm

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable Cajdsg Rxh Ijpfx Afqsa

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min Caodpfx Ajfxw H Aefqea - Dual-pedal foot switch - Potentiometer for stepless speed control

Stanje: dober (rabljeno), Leto izdelave: 2024, Welding turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Cajdpfx Ajbvk I Eofqoa Tilting range: stepless via crank gear motor 0 – 90° Speed: 0.3 – 2.5 rpm Incl. foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS Caodsw T Sqyopfx Afqsa CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 25.000 m/min, hitri pomik os Y: 25.000 m/min, leto zadnje generalne obnove: 2025, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Technical specifications of the machine: Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Travel paths: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range (rpm): 15,000 Feed rates: X, Y & Z axis (mm/min): 10 - 10,000 Maximum rapid traverse speed: X, Y & Z axis (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle, 25 kW - Chip conveyor - Coolant lubrication system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m coiled cable - INA linear roller guide system RUE 45 on all linear axes with central lubrication Casdpfx Afsv Rw Uueqoa - Complete splash guard enclosure RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured through a rigorous selection process and subjected to a comprehensive inspection (deep-dive check). After thorough cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: A 1040, Offer 23342 Hydraulic Welding Rotating and Tilting Table – Three Axes – Welding Manipulator Technical Data: - Max. load capacity: 750 kg - Face plate diameter: 700 mm - Min. table height in horizontal position approx.: 720 mm - Average table height in horizontal position approx.: 920 mm - Max. table height in horizontal position approx.: 1,060 mm - Working height adjustable in 3 steps manually - Face plate motorized, can be rotated and tilted - Rotary motion electrically infinitely variable, approx. 0.01 – 2.0 rpm - Right- and left-hand rotation - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 1.5 kW - Handheld remote control for rotation direction, swiveling, and tilting Caedpjraiu Defx Afqea - Space requirement approx.: W 1,100 x H 750 x D 700 mm - Weight approx.: 500 kg

Stanje: novo, Leto izdelave: 2024, Protec welding turntable, 20,000 kg load capacity Steplessly adjustable speed: 0.05 - 0.35 rpm Hand-held remote control Foot pedal remote control available at an additional cost of €390 Csdpfsid Szksx Afqsaa Height: 700 mm Diameter: 2,000 mm

Stanje: novo, Display promotion. NEW. Nr. 1 unit available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-size profiles, delivering high output and excellent precision. Its robust construction provides the necessary rigidity and accuracy to the cutting assembly. The blade is driven by a two-speed motor and a special gearbox, featuring a complete bronze gear with a hardened and ground worm screw. The well-dimensioned flywheels and robust blade guides are fitted with sealed ball bearings and adjustable carbide (widia) inserts. Blade tensioning is achieved by means of an electromechanical micro-switch that puts the band under tension by rotating the blade. The machine features safety devices on the flywheel covers and the blade, and is equipped with a rotating worktable for material support and a vise with quick-approach device. Operation: Caedpfeg S Ui Asx Afqoa Initiate cutting cycle via start button; the machine: 1. Closes the vise and activates the blade motor 2. Lowers the saw bow for cutting 3. Returns the saw bow to the starting position 4. Stops the blade motor 5. Opens the vise Manual cutting option available. Cutting speed (m/min): 38-77 Blade thickness (mm): 1.2 Mitre cutting range: From 45° left to 60° right Adjustable stop for repetitive cuts Coolant pump output: 0.06 kW Cutting capacities: At 0° (Round / Square / Rectangle): 260 mm / 250x250 mm / 220x330 mm At 45° left (Round / Square / Rectangle): 225 mm / 210x210 mm / 160x225 mm At 45° right (Round / Square / Rectangle): 215 mm / 200x200 mm / 160x210 mm At 60° right (Round / Square / Rectangle): 130 mm / 130x130 mm / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight: 415 kg