SAMPUTENSILI S200

SAMPUTENSILI S200

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Nwodjwhp Dnjpfx Agxef Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Nwodpfx Aowbuyzsgxsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 25.181 h, Funkcionalnost: popolnoma funkcionalen, OPREMA: Sinhronsko vreteno Pogonska orodja Njdpfoyk A Ukjx Agxjwf C-os Obdelava zadnje strani Transportni trak za dele Magazin za podajalnik palic FMB Turbo Transporter za odrezke

Stanje: rabljeno, Leto izdelave: 2014, X-hod: 400 mm Y-hod: 400 mm Z-hod: 375 mm Skupna potrebna moč --- kW Teža stroja ca. 7,6 t Nodpfx Ajycxihjgxswf Potreben prostor ca. --- m DMG MORI DMU 40 EVO (2014) X - 400 mm Y - 400 mm Z - 375 mm Heidenhain iTNC530 z merilno sondo TS649 Hitrost vretena: 14.000 min⁻¹ Orodni magazin 30 pozic / Orodni priključek HSK63 Trakasti filtrirni sistem z notranjim hlajenjem (IKZ) 40 BAR Orodni magazin 30 pozic Stroj je na zalogi pod napetostjo. Video na voljo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment • Coolant tank with paper filter, 600 l • Touch probe • Chip conveyor • Electronic handwheel (remote control) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Nwedpjymcvmsfx Agxjf Taper Size HSK 63

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg Nwedpfxouhbv Se Agxjf - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Stanje: dober (rabljeno), max. gear diameter 250 mm with 3" cutter module 5.5 hobbing length 70 mm cutter module 5.5 max. recognized external diameter 300 mm spindle diameter 85 mm Nwedpfxsgq Dgdo Agxof table bore diameter 39 mm table external centering diameter 139.75 mm electric tool motor power 4 HP height 1,800 mm length 1,450 mm weight 2,450 kg width 1,000 mm

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 475 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vrtenja: 42.000 obr/min, premer mize: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured in our facility. The machine once again meets original factory tolerances! Working Area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm Nedpfx Aevvlmcsgxewf - Clearance Height: 500 mm Tool Changer: 52 positions Spindle: HSK40E, max. 42,000 rpm Tool Measurement Laser for tool calibration Handheld Control Unit Minimum Quantity Lubrication Prepared for extraction system (e.g. for graphite machining) Spindle Compensation Precision Package CNC Control: Röders RMS6, latest version The machine can be viewed in operational condition at any time. For more information about the type and scope of our refurbished machines, please visit our website or our Hüttmann YouTube channel.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available Nwjdpfx Agsw Hg Nljxof No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: dober (rabljeno), Leto izdelave: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1 Nedpfjtumrpox Agxowf Control unit 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m