SAMAG MFZ 2-3

SAMAG MFZ 2-3

This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300 x 500 x 450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range from 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for further information on this machine.

Machine Advantages

Technical Machine Advantages

• Required installation space (length x width): approx. 5950 mm x 6700 mm
• Weight (kg) including coolant system and chip conveyor: approx. 25,000 kg
• Operating voltage: 400 V 3~ 50 Hz
• Control/valve voltage: 24 V DC
• Machine power rating: approx. 82 kVA
• Main switch pre-fusing: 3 x 160 A
• Connector cross section: 70 mm²

Additional Information

Ott tool clamping system
Torque (S1/S6): 63/83 Nm
Rated speed: 4200 rpm
Spindle bearing diameter: 70 mm
Spindle lubrication: Lifetime grease lubrication
1 horizontal 180° swivel support (W axis)
Hnjdpfx Aoyycizsalek
Faceplate diameter (NC drive/counter bearing): 500/345 mm
Permissible tangential torque: 15,000 Nm
Positioning accuracy: ±3 arcseconds
Swivel time (0°/180°): Approx. 6 s
Number of horizontal 360° workpiece support axes
Positioning via face gearing: 120 x 3°
Positioning accuracy (120 x 3°): ±3 arcseconds
Max. transport load per A axis: approx. 600 kg
Permissible tangential torque: 5000 Nm
Work area (interference circle x length): Ø700 x 940 (1036) mm
Positioning at intermediate positions outside the 3° division: Possible (NC position control)
Positioning accuracy: ±25 arcseconds
Permissible tangential torque: 1000 Nm
Tool magazine: 90 tool positions (3 x 30)
Max. tool diameter with free adjacent positions: 160 mm
Chip-to-chip time (within 1 cassette): Approx. 5.2 s

Media

Hydraulic unit capacity: 160 l
Max. operating pressure: 160 bar
Max. flow rate: 12 l/min
Pneumatic system: required compressed air connection, required air consumption (short-term) 6 ± 0.5 bar
Plant air quality: Class 545 according to DIN-ISO 8573-1
Coolant system: Knoll coolant unit with coolant cooling
Coolant tank capacity: Max. 1400 l
Separate machine bed flushing: 160 l/min at 2.6 bar
External tool cooling and various flushing functions: 120 l/min at 3.5 bar
Internal tool cooling through the spindle: 40 l/min at 60 bar

Dimensions
Machine depth 5450 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.