Salvagnini P4-2512
Salvagnini P4-2512

Name: Salvagnini P4-2512
Brand: Salvagnini
Availability: InStock

Leto izdelave

2000

Stanje

Rabljeno

Lokacija

Nemčija

Prikaži karto

Podatki o stroju

Oznaka stroja:: Salvagnini P4-2512

Proizvajalec:: Salvagnini

Model:: P4-2512

Leto izdelave:: 2000

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Tehnične podrobnosti

Število osi:: 3

Podrobnosti ponudbe

ID oglasa:: A20822997

Referenčna številka:: DE-OTH-SAL-2000-00001

Posodobitev:: nazadnje dne 05.03.2026

Opis

This 3-axis Salvagnini P4-2512 was manufactured in 2000, featuring a maximum bending length of 2500 mm and capable of processing sheet thicknesses up to 3.00 mm. It is equipped with quick-change tool segments for enhanced flexibility and precision in sheet metal processing. If you are looking for a high-quality bending machine, the Salvagnini P4-2512, which we offer for sale, is an excellent choice. Please contact us for further information about this machine.

Rsdpfx Agex Nr Tzstet
Additional Equipment

• O+UC1000/2(SO)
• P40FFICE
• Tool set consisting of 13 CLA tool pairs with a total length of 1100 mm
• Includes pairs of CLA tools from 25 mm to 90 mm
• Quick-change segments for large cut-outs

Machine Advantages

Technical Machine Advantages

• Maximum length of notched blank at entry: 2700 mm
• Maximum width of notched blank at entry: 1500 mm
• Maximum diagonal of notched blanks: 2700 mm
• Maximum clearance for bends above the working table: 127 mm
• Maximum sheet thickness at a tensile strength of 410 N/mm²: 2.00 mm
• Maximum sheet thickness at a tensile strength of 600 N/mm²: 1.25 mm
• Maximum sheet thickness at a tensile strength of 265 N/mm²: 3.00 mm
• Minimum sheet thickness: 0.50 mm

Additional Information

Optional: Clamping segment set
84x 25 mm segments, 10x 155–200 mm center segments, 2x BLC swivel segments, 2x BLX sliding segments, 2x tool carriages

Optional: Special clamps with cut-outs:
12x 150 mm quick-change segments, 2x 40 mm quick-change segments, 20x 50 mm quick-change segments, 2x 75 mm quick-change segments, 2x 185 x 195 mm center segments

Technical Specification
Bending Length: 2500 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.388 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za obdelavo pločevine EAE MAKİNA San. ve Tic. A.Ş. Downspout Pipe RFM

Turčija

1.312 km

Stroj za obdelavo pločevine
EAE MAKİNA San. ve Tic. A.Ş.Downspout Pipe RFM

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1, skupna masa: 4 kg, Proizvodna linija za odtočne cevi Debelina traku: 0,6 - 0,7 mm Kakovost materiala: jeklo in predhodno barvano Premer izdelka: Ø 100 mm (opcijsko: 75, 87, 111, 120 mm) Proizvodna linija vključuje: Dvoglavi odvijalec: 4+4 t, Kasetni tip stroja za oblikovanje z valji (z dodatnimi kasetami) Rsdjwvhnhjpfx Agtet Hidravlična rezalna enota.

Poglej podrobnosti

Mali oglas

Hidravlične giljotinske škarje LOTZE 201 3000x12

Nemčija

614 km

Hidravlične giljotinske škarje
LOTZE201 3000x12

Pokliči

Stanje: rabljeno, Leto izdelave: 1995, Technical Details: Sheet width: 3,000 mm Sheet thickness: 12 mm Frame gap: 3,500 mm Control: Cybelec DNC 10 G Back gauge: 1,200 mm, motorized Cutting angle: 1.2 - 2.73° Blade gap adjustment: yes, mm Shearing force: 66,000 daN Blade length: 3,100 mm Hold-downs: 17 units Interface: RS232 Table size: 3,200 x 600 mm Total connected load: 22 kW Approx. machine weight: 11.0 + (1.0 t attachments + accessories) t Space requirements approx. LxWxH: 4.5 x 2.6 x 2.1 m Transport dimensions LxWxH: approx. 5.0 x 2.25 x 2.2 m The guillotine shear was first commissioned in 1998. The DNC 10 G control system was specifically designed for guillotine shears. It features a numerical axis for controlling the back gauge and automatically calculates and regulates the blade gap, cutting angle, and cutting depth based on the material to be sheared (according to the manufacturer's specifications). Table with side stop: L:930 x W:105 x H:42 mm 2 table extensions: L:1,600 x W:100 x H:83 mm Angle stop (mounted on table extension) Operation via control panel with pivoting arm and foot pedal Rjdpjvc Amtsfx Agtet Equipment: - Run-out table with rollers for cut material - 2x protective guards

Poglej podrobnosti

Mali oglas

Linija za rezanje - Grandini GRANDINI P.S.15

Silvi

408 km

Linija za rezanje - Grandini
GRANDINIP.S.15

Pokliči

Stanje: rabljeno, Grandini Slitting Line – Model LTP15 / PSM15 Longitudinal sheet metal slitting line, fully operational, composed of uncoiler (decoiler) and processing line, ideal for handling coils up to 1500 mm wide. Line Composition: - Decoiler (uncoiler) with 8,000 kg capacity - Straightening unit - Longitudinal slitting group with 8 knives (up to 9 slits) - Shear (20/10) - No. 2 scrap winders - Film application unit SLITTING LINE Technical Specifications: - Power supply: 380 V – 50 Hz - Auxiliary voltage: 110 V - Installed power: 20.8 kW - Pneumatic pressure: 6 Bar - Hydraulic pressure: 60 Bar (max 120 Bar) - Hydraulic pump capacity: 16 l/min - Working speed: 20 m/min Processing capacity: - Max steel thickness (R=42 kg/mm²): 2 mm - Number of longitudinal cuts: up to 9 - Useful width: 1500 mm Configuration: - Working height: 900 mm - Fixed reference edge: right - Operator controls: left DECOILER (UNCOILER) Technical Specifications: - Power supply: 380 V – 50 Hz - Auxiliary voltage: 110 V - Max absorption: 29 kW - Pneumatic pressure: 6 Bar - Hydraulic pressure: 60 Bar (max 120 Bar) - Pump capacity: 16 l/min Redpfxox Ek Nms Agtet - Feed speed: 20 m/min Coil data: - Capacity: up to 8,000 kg - Maximum outer coil diameter: up to 1500 mm - Inner coil diameter: 500 mm - Mandrel expansion: 470 – 540 mm - Coil width: 1500 mm - Mandrel axis height: 1050 mm

Poglej podrobnosti

Mali oglas

Majur

395 km

Linija za profiliranje T85

Pokliči

Mali oglas

Cesena

310 km

Stroj za upogibanje profilov
PARMIGIANIMERCURY PROFILE ROLL

Pokliči

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, število valjev: 3, premer gredi: 130 mm, premer valja: 380 mm, vrtljajska hitrost (min.): 5 obr/min, skupna masa: 4.500 kg, moč: 15 kW (20,39 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, nujno zaustavitev, STROJ ZA UPORABLJANJE PROFILOV- MODEL PARMIGIANI ITALIJA Rodpjxackcefx Agtjt ELEKTROMEHANSKI STROJ IZHODNA PREMERA GREDI: 130 mm 3 VALJI V PIRAMIDNI POSTAVITVI ZGORNJI VALJ POGANJAN Z ZOBNIŠKIM PRENOSOM IN ELEKTROMOTORJEM 11 kW Stranski valji upogibanja z elektro motorjem 3 kW PREMER ZGORNJEGA VALJA: 380 mm PREMER STRANSKIH VALJEV: 350 mm NADZORNA PLOŠČA POSODOBLJENA – NAJNOVEJŠA TEHNOLOGIJA Z ELEKTRIČNIMI INVERTERJI, POPOLN NADZOR MOČI Z NESPREMENLJIVO SPREMENLJIVO HITROSTJO UKAZI ELEKTRIČNI NA PRENOSNEM PRITISNEMU GUMBU DIGITALNI PRIKAZ POLOŽAJA UPORABLJALNIH VALJEV TEŽA STROJA: 4,5 tone VARNOSTNI IN NUJNI SISTEM NAMEŠČEN STROJ DELUJE Z VERTIKALNIMI GREDMI

Poglej podrobnosti

Mali oglas

Majur

395 km

Valjčna profilirna linija TR135

Pokliči

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Valjčna linija za oblikovanje visokega trapeznega profila, višina 135 mm. Stroj je NOV in popolnoma avtomatski. Razvijalec 15 t (508/620 x 1500) + valjčna linija + avtomatski zlagalnik. Samodejno podajanje v valjčni stroj brez ročnega upravljanja. Rodpfxoxvz Ncs Agtjt Linija je nameščena in pripravljena za ogled ter preizkus kadarkoli.

Poglej podrobnosti

Mali oglas

Hidravlične giljotinske škarje Wieger Alpha 301 13/30

Nemčija

614 km

Hidravlične giljotinske škarje
WiegerAlpha 301 13/30

Pokliči

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Sheet width: 3150 mm Sheet thickness: 13 mm Frame gap: 3670 mm Blade length: 3150 mm Hold-downs: 18 units Backgauge: motorized, 1000 mm Height above floor level: 850 mm Operating hours: 3256 Table size (LxW): 3770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Rodpfju Icnfox Agtst Short stroke Continuous operation Cutting gap illumination Hydraulic sheet lifting device Rear light curtain Positionable backgauge

Poglej podrobnosti

Mali oglas

Mindelheim

400 km

TISKALNA ZAVORA
PromecamSisson-Lehmann

6.500 €

Fiksna cena plus DDV

Pokliči

Mali oglas

Nemčija

796 km

Zgibalni stroj
KöllschenAM 2000x20

Pokliči

Stanje: rabljeno, Leto izdelave: 1976, številka stroja/vozila: 761907, General / Technical Data: Heavy mechanical swing bending machine with robust welded construction in very good condition. Rodpecvtbysfx Agtot Working width: 2000 mm Maximum material thickness for steel ST 50: 20 mm Opening of upper beam (clamping beam): max. 475 mm Adjustability of bending beam: 200 mm, motorized height adjustment Bending angle: 130°, adjustable via electronic angle input Upper beam speed: 6 mm/sec Bending beam rotation speed: 1.25 rpm (approx. 90 sec for 90° bend) Back gauge: adjustable from 50–999 mm, motorized, with digital length display Machine dimensions (H x W x D): 3600 x 4350 x 4400 mm (without pit / with bending beam platform) Control cabinet dimensions (H x W x D): 1800 x 1200 x 400 mm Drive power – bending drive: 30 kW Drive power – upper beam (clamping beam): 22 kW Power supply: 500 Volt, 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / Special Equipment: • 5 sets of bending tools (clamping and bending bars): R 8, R 12, R 15, R 20, R 40 • Foldable back gauge • Centralized lubrication • Machine documentation Note: • Machine comes from a maintenance workshop • A foundation pit, 900 mm deep, is required for the machine. The base for the swing drive shown in the pictures is for test operation and demonstration purposes only.

Poglej podrobnosti

Mali oglas

Birmingham

1.407 km

Časnikarstvo zavora
TRUMPFV85S

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Zelo čist, dobro vzdrževan hidravlični CNC upogibni stroj Trumpf V 85S z veliko količino orodja naprodaj. Trumpf V85S, dolžina upogiba 2,5 metra, 85 ton – 4-osni CNC upogibni stroj v dobrem stanju. Proizvajalec: Trumpf Model: Trumabend V85S Leto izdelave: 1996 Maks. upogibna sila: 850 kN / 85 ton Maks. hod: 215 mm Čas zaviranja: 86 ms Rodpfx Agor Hcl Astst Skupno število osi: 2-osno zadnje ležišče / skupno 4 osi – Y1, Y2, X, R ter i os Velika količina zgornjega in spodnjega orodja Trumpf, nekaj orodja povsem novega Komplet vsebuje: • 2-osno zadnje ležišče • i-os – premična spodnja baza za uporabo dvojnim multi V brez potrebe premikanja ali menjave orodja s strani operaterja • Popolnoma servisiran / dobro stanje

Poglej podrobnosti

Oglašujte tukaj