CNC obdelovalni center

SAEILO CONTUR TV 1000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 610 mm, pomik po osi Z: 508 mm, obremenitev mize: 600 kg, največja hitrost vrtenja: 8.000 obr/min, število mest v zalogovniku orodij: 40, TECHNICAL DETAILS Control: HEIDENHAIN X-axis travel: 1,016 mm Y-axis travel: 610 mm Z-axis travel: 508 mm Table Table dimensions: 1,080 x 580 mm Max. table load: 600 kg Spindle Rsdpfx Aewtrbmjbhsn Tool changer: 40 positions Spindle taper: SK 40 Spindle speed: 5 to 8,000 rpm Spindle power: 11/16.5 kW Feed rates Cutting feed rate: 0.25 to 5,080 mm/min Rapid traverse (X/Y): 20,000 mm/min Rapid traverse (Z): 1,500 mm/min MACHINE DETAILS Machine weight: 6,000 kg

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Redpjdhhprjfx Abhjn Weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Rodpju Tq U Iofx Abhen Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Redpfxoia Rtdj Abhon Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sväng över bädd: 1290 mm Sväng över tvärslid: 910 mm Sväng i urtag (l:500 mm): 1580 mm Spetsavstånd: 6000 mm Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 rpm Spindelnos: ASA A2 11" Arbetsstyckets vikt mellan spetsar: 20 ton Kon i bakdubb: MK6 Längdmatning: 0,045–5 mm/varv Tvärmatning: 0,022–1,5 mm/varv Metrisk gänga: 0,5–56 Modulgänga: 0,25–28 Whitworth-gänga: 1/2–84/" Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Höjd: 1600 mm Vikt: 13 400 kg Sony DRO tvärslid 3 st stabilstöd Planskiva 4-backig planskruv Redpewc Nzpsfx Abhen Härdade gejdrar Elmatning på översta sliden

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance column to spindle center: 808 mm Spindle taper: SK 40 Tool changer: 24 stations Spindle speed: 7,000 rpm Redevrxd Hopfx Abhon Table working area: 2,000 x 760 mm Table load capacity: 1,000 kg Rapid traverse x, y-axis: 24,000 mm/min Rapid traverse z-axis: 20,000 mm/min Feed rate: 1 – 5,000 mm/min Machine weight: approx. 8,700 kg Including chip conveyor, coolant system The machine can be inspected under power.

Stanje: zelo dobro (rabljeno), stružna dolžina: 5.500 mm, Manufacturer: WEIPERT Model: W1400 Control system: R&D MTC3 Turning length: 5,500 mm Swing over bed Ø: 1,400 mm Swing over cross slide: 960 mm Length: 9,000 mm Width: 2,900 mm Height: 2,900 mm Weight: 32,000 kg Rodpfxjwzhzle Abhjn

Leto izdelave: 2001, Stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable Redpfx Aot Ea Tfebhen - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining

Stanje: rabljeno, Leto izdelave: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control HEIDENHAIN, TNC 150 B Machine weight approx. 16 t Redpfjtqqnwox Abhjn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Rjdpfxerfw Nhs Abhsn Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Chip conveyor