Podnebna celica

RS-Simulatoren KKC 22/45L

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Climatic Operation: 10 – 90°C Humidity: 10...98% rH Kjdpjvx Nfbefx Al Njdk Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Further questions gladly answered by phone.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Weiss Kjdpfxjw R Rt Io Al Nedk Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 parts for transport (bolted design) Temperature range: -30°C to +100°C Refrigerants: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68 kW nominal power Voltage: 3x400V/PE Current: 135A Kdodpfjqw U Aasx Al Nok Type: KKM 40 / 45 S Further technical details will follow! For your safety as buyer, please note the following information: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After passing all checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (We reserve the right to make changes and corrections to the technical data!) Feel free to contact us by phone for further questions.

Leto izdelave: 2022, stanje: zelo dobro (rabljeno), Dycometal Model: CCK -40/1500T Climatic chamber, water-cooled Volume: 1,500 liters Internal dimensions: height 1,000 mm, width 1,000 mm, depth 1,500 mm External dimensions: height 2,200 mm, width 1,293 mm, depth 3,400 mm Thermal test Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to 1.5°C Climatic test temperature range: +10°C to +90°C Relative humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1,120 kg Condition: used Scope of delivery: (See picture) Kedpfx Aou N Uugsl Nedk (Specifications subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), TIRA Type: TCZ 4022 S-2K Description: Air-cooled Climate Simulation Chamber System Configuration: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability in supply air (temporal): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 Τ13 / EN 60068) - Temperature stability in supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C - Cooling rate (acc. to DIN 50011): approx. 2.0 K/min (without thermal load, acc. to DIN 50011 / EN 60068) or test specimen in temperature range -30°C...+85°C Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (in supply air, temporal): ≤ ± 2.5% r.h. (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test room load) - With max. 16 kW heat compensation - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test room (W x D x H): approx. 2260 x 4648 x 2260 mm - Outer dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test room door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design features: - Air routing: Supply air via perforated plate at rear wall, ceiling area; Exhaust air via perforated plate at rear wall, floor area - Temperature control: Direct cooling via refrigerant evaporation in finned heat exchanger; Heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in heat exchanger - Internal lining: Stainless steel; External cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel; Floor load capacity: 15,000 N/m²; Wheel load (contact area ≥4cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, exterior painted with viewing window (W x H) 1000 x 1000 mm - Test room lighting: 4 spotlights, each 500 W - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Complete unit: approx. 4,900 kg - Machine set KB 127: approx. 750 kg Kdedpfx Aljvx S Hhj Njk - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Stanje: zelo dobro (rabljeno), Type: PHP - J3 Technical Specifications: Air-cooled Temperature and humidity range: ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your peace of mind as a buyer, please note the following information! The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak tightness test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Kdodpfx Alstzbz Aj Nsk Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Kdjdpevb Hanofx Al Nek Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Espec Type: PHP - J3 Technical Data: Air-cooled Kdjdpfx Alotzbzcs Nek Temperature and humidity range: Room temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Chamber volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function test and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information reserved!) We would be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Modular Plant Growth Cabinets Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton lighting module - Temperature range: +5°C to +45°C for temperature testing - Test chamber volume: approx. 1300 l - Simpac controller - Network connection - USB port Fitotron® HGC series plant growth chambers are designed with a modular system. Individual modules can be added or replaced as required, allowing the unit to be adapted for diverse applications. Ideally suited for high-light-requirement plants such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400W/D and 100W Temperature range: +5°C to +45°C Kjdpjvz U Erjfx Al Nsdk Temporal temperature deviation: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ±3 to 5% r.H. Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.H.: approx. 0.8 kW Performance data for climate testing with irradiation - Temperature range: +10°C to +45°C with lights on - Temporal temperature deviation: ±0.5 K - Humidity range: 40% to 95% - Dew point range: +4°C to +35°C - Temporal humidity deviation: ±3 to 5% r.H. - Humidification/dehumidification system, test chamber stainless steel - Internal dimensions (H x D x W): 1400 mm x 750 mm x 1270 mm - External dimensions (H x D x W): 1985 mm x 980 mm x 2320 mm - External dimensions with lighting module: Height 2450 mm - Single door with observation window - Computer interface - Connection: 3/N/PE 400V ±10% 50Hz - CE marked, mobile, in very good condition - Pipe penetration Ø 50 mm - Air cooling - Refrigerant: R404A - Weight: approx. 480 kg + 130 kg lighting module