Rossi Monza (Monzesi) 410 (420)

Rossi Monza (Monzesi) 410 (420)

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Crjdpjw Intaefx Apleb Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Stanje: rabljeno, Manufacturer: CINCINNATI Crjdpfjwrpykox Apljb

Stanje: dober (rabljeno), Leto izdelave: 2003, Dobro stanje, aktivna orodja, merilna roka. Deli, ki so prikazani v roki, niso vključeni. Tehnični podatki so prikazani na slikah. Credowybg Sopfx Aplob

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Crjdpfxevca Izo Apleb Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed Credpfeifn N Nox Apljb - Double gripper Available immediately

Stanje: generalkompletno obnovljen (rabljeno), Centerless cylindrical grinding machine MONZESI ROSSI MONZA 1500 (currently being overhauled and fully electrically/electronically retrofitted) Siemens electronics with touchscreen, brushless motor for the Z-axis (workpiece diameter) and regulating wheel (variable RPM), stepper motor for grinding wheel dressing increments, automatic size compensation after dressing the grinding wheel Grinding wheel: 350 mm diameter x 610 mm width This machine can be inspected at our warehouse in Gussago (BS), Italy. Plunge Grinding Cedommqiropfx Aplsrb With the plunge grinding process, workpieces with stepped or profiled external surfaces—such as nozzle needles, valves, journal crosses, gearbox and electric motor shafts—are machined. Available technologies include straight or angled plunge grinding, plunge grinding for single or multiple workpieces, plunge grinding in several operations (simultaneously or sequentially), and oscillating plunge grinding. Through-feed grinding is used for machining unprofiled workpieces, such as cylindrical and tapered rollers, rings, rods, and hydraulic slide valves. This grinding process is highly productive and mainly used for series and mass production of precision components.

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 2-axis CNC lathe with robotic loading Codpjk Hz Iwefx Aplsrb Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Z-axis travel: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0500071, SPECIFIKATIONEN Tischgröße: 600 x 320 mm Verfahrwege X-Achse: 450 mm Verfahrwege Y-Achse: 350 mm Verfahrwege Z-Achse: 380 mm Spindel: BT40 Spindeldrehzahl: 0-8.000 U/min Spindelmotor: 10 kW Cjdpfxetylaze Aplerb Eilgang in allen Achsen: 30 m/min Werkzeugwechsler-Kapazität: 12 Werkzeuge Werkzeugwechselzeit: 8 Sekunden Ungefähres Gewicht: 2.000 kg Maschine ausgestattet mit: • Siemens 810D Shopmill CNC-Steuerung • 4. Achseinheit • Späneförderer • Beleuchtung • Kühlsystem • Vollumhausung

Leto izdelave: 2003, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 50/140/03, GENERAL FEATURES Grinding Wheel Dimensions (OD x ID x width): 508 mm Regulating Wheel Width: 254 mm Dressing Speed: Ø508 x 254 mm Lubrication (Auto/Manual): centralized automatic / automatic lubrication Cedpsd Nw T Iefx Aplerb CNC Brand: FANUC CNC Model: Series 18i - T Number of CNC Axes: 8 Grinding Wheel Width: 254 mm ELECTRICAL SPECIFICATIONS Total Power: 25 kW Voltage: 220/380 V DIMENSIONS AND WEIGHTS Length: 2150 mm Width: 2200 mm Height: 3400 mm Weight: 8000 kg

Stanje: rabljeno, Leto izdelave: 2012, stružna dolžina: 300 mm, premer struženja: 200 mm, CNC stružnica DMC Korea model DL8TM Os C s pogonskimi orodji Glava z 12 orodji na VDI30 Cjdpfxoxgqrno Aplorb Vpenjalna glava 210mm Premer vretena 51mm Dolžina struženja 300mm Premer struženja 200mm Lovilec kosov Konjiček Transporter odrezkov