KPZ-1 + ProfiSpray V

ROMER Set: Kabine + Applikator

Stanje: rabljeno, Leto izdelave: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-theta precision lens Dkodpfx Ajvtftqopweu Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm Dodpfx Apev R U Ifjwoku 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Djdpfx Apofz A Ilowoku Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction Dkjdpfxsfz A Iws Apwou The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: novo, Leto izdelave: 2020, 🏭 BARVNA KOMORA ZA PRAŠNO BARVANJE KPO-3 Samodejno čiščenje filtrov z nastavljivim pulznim časom ter ročnim načinom. 🧼⏱️🖲️ 100 % poliester filtri – pralni, vodoodporni in dolgotrajni. 🧵💧♻️ ROMER JET™ čiščenje filtrov – patentiran hitri zračni pulz za močno čiščenje. 💥💨🏅 Nizkohrupni aluminijasti ventilatorji (74–79 dB) – varno, isker zmanjšano delovanje z nizko porabo energije. 🔇⚡🛡️ Nastavljiva zračna zapora – antistatična plošča ščiti filtre in izboljšuje odsesavanje. 🌬️🛡️📈 Tesna namestitev filtrov – tesnilo in objemka za močno tesnjenje ter enostavno vzdrževanje. 🔩🧷✅ Upravljanje na dotik – samodejno (čas), samodejno (senzor zamašitve), ročni način + opozorila za menjavo filtrov. 📲🔁⚠️ Opcijska posoda za prah – zbiranje odpadkov ali fluidizirana posoda s direktnim dovodom za aplikator. 🧺💨🎯 Dodjflk Akjpfx Apweku Nadglavna prečnica – premika nosilce skozi kabino, zmanjšuje ročno delo. 🏗️➡️💪 Integrirana sita enota (z zabojnikom) – čiščenje vrnjenega prahu za ponovno uporabo, EX-cona vibrator. 🧪♻️⚙️ Eksplozijsko varna zasnova – skrbno izbrani deli preprečujejo eksplozivne zmesi. 🛡️💥✅

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 330 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 31iB5, širina mize: 550 mm, dolžina mize: 380 mm, Oprema: dokumentacija / priročnik, VERTIKALNI OBDELOVALNI CENTER FANUC ALPHA T14iFb LETNIK 2015 Dedey Tvnwepfx Apwsku OPREMLJEN S FANUC 31iB5 ELEKTRONSKI VOLAN HODI X 500 Y 400 Z 330 MM DELOVNA POVRŠINA MIZE 550 x 380 MM GLAVA Z DIREKTNIM POGONOM PRI 24.000 OBR./MIN. ENOTA ZA HLAJENJE GLAVE

Stanje: novo, SERRMAC ETD 22 - PGM Column Drill Features: - Swiveling table + vise - Precise, quiet, and reliable - Direct drive transmission via INVERTER, no pulley changes - Precision spindle axis with hardened Morse taper - Power supply: 380V 3-phase - Ground-finished column Standard configurations: • Digital display indicating spindle speed • Tapping function with adjustable working depth • 24V LED lighting system • Electronic membrane control panel • Spindle rotation reversal button Technical Data: - Drilling capacity in steel: Ø 22 mm - Tapping: M16 - Spindle taper: MT2 - Column diameter: 98 mm - Spindle stroke: 120 mm - Transmission: Direct with inverter - Speed settings: Variable Dedegyggzjpfx Apwsku - Spindle speed range: 265–4200 rpm - Motor: 1.8–2.5 kW / 380V 3-phase - Power supply: 380V 3-phase - Weight: 240 kg (column)

Stanje: dober (rabljeno), JDS hydraulic press Bed: 505 x 510 mm Dimensions: 140 x 140 x 285 cm (L x W x H) Dkedpfeiki Ahsx Apwou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 550 mm, pomik osi Y: 400 mm, pomik po osi Z: 415 mm, proizvajalec krmilnikov: BROTHER, skupna višina: 2.360 mm, obremenitev mize: 200 kg, skupna masa: 4.600 kg, največja hitrost vretena: 12.000 obr/min, To vertikalno obdelovalno središče Brother TC 32B je bilo izdelano leta 2007 na Japonskem. Opremljen je z Brother krmiljem, ima 3 + 1 osi in rotacijsko mizo. Vreteno BT30 lahko deluje s hitrostjo do 12.000 vrt/min. Dodatna oprema • Transporter za ostružke • Daljinski upravljalnik • Rotacijska miza Kitagawa Dsdpfxjyi Ehke Apwjku Prednosti stroja Tehnične prednosti: • 3 + 1 os • Držalo orodja: 26 naključnih položajev • Hitri pomik: 70-70-70 m/min • Palete: 2 / 600 x 425 mm Dimenzije Globina stroja: 3700 mm

Stanje: rabljeno, As-new CNC vertical machining center, milling machine VMC, BAZ, HSC Milling, Milling Center TAIKAN B540Z Serial no.: 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm Travel range X-axis for tool change position X: 540 mm Table size: 520 x 400 mm Spindle mount: ISO 25 Distance spindle nose - table: 165 - 395 mm Spindle speed: max. 36,000 rpm, stepless Feed rate: 0 to 10,000 mm/min Rapid traverse: 15 m/min Table load: 200 kg Dsdpjw Ed U Nefx Apwoku Tool length: max. 120 mm Tool diameter: max. 80 mm Tool weight: max. 0.8 kg Tool change time: approx. 10 sec. Axis drives: each 0.8 kW Spindle drive: 3.5 kW at 100% duty cycle Power supply: 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Tool measurement system: METROL tool sensor - Vertical milling spindle = high frequency spindle with liquid cooling and separate chiller unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Safety enclosure with sliding door - Central lubrication - Includes 10 pcs. tool holders ISO 25 with ER20 collet chuck and a batch of collets Space requirement for transport (L x W x H): 1800 x 1500 x 2300 mm Weight: 2900 kg Excellent condition – as new Machine comes from a showroom and has only a few operating hours.