Oprema za prah

ROMER Powder Coating Booth KPP

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Ihedpfx Adsh Ayyqokjw Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Gauge width: 3345 mm Ijdpfx Adef Ncadekjhw Track height: 650 mm 2x machine cutting torches with cutting table

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Ihsdpfx Adjpfatpekew Weight: 400 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, Iodpop E T N Ajfx Adkohw prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili.

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 Ihedpfx Adoignt Uokew TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: generalkompletno obnovljen (rabljeno), Edwards GV250, after complete overhaul: - in absolutely like-new condition - inspected according to manufacturer specifications, ensuring all clearances and dimensions are within tolerance - fitted with new wear parts - available at short notice - includes one-year warranty Ijdpfofq Rgisx Adkehw

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m Ijdpfx Adsd Iipmskshw SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Isdofg Rlcepfx Adkohw Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, doseg roke: 1.300 mm, Popoln paket za vašo avtomatizacijo varjenja z najnovejšo robotsko serijo UR10e – prosimo, ne kupujte več serije CB. Želite svojo varilnico avtomatizirati s Cobotom, da boste kos prihodnjim izzivom? Potem je rešitev OH-au2mate Cobot Welding Solutions z varilnim izvorom Lorch prava izbira za vas! Ta popolno usklajen paket združuje: - visokokakovostno robotsko tehnologijo vodilnega podjetja na trgu Universal - inovativno varilno tehnologijo Lorch - intuitivno programsko opremo za upravljanje Iodpfxet S U Aus Adkshw Točen paket zajema: robot UR10e pripravljen za varjenje, upravljalne elemente, nosilec gorilnika, varilni izvlečni gorilnik Translas 8XR, varilni izvor Lorch S5 z 400A.

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available Ihjdpfx Adonh R Ekjkow • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance