Avtomatski pralni stroj

ROMER MAut

Leto izdelave: 2020, stanje: novo, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, saving money and improving washing quality. This is crucial, as the apparent savings from systems that do not utilize these solutions can ultimately lead to much higher costs associated with the disposal of chemicals and waste, which will simply be greater. Attention should also be paid to maintaining the required bath parameters. Research and development have enabled us to develop a car wash system with an optional detail drying function, where hot air is blown onto the parts by a fan after washing. The car wash system is equipped with an advanced macroprogramming system, where each program, depending on the number of tanks, can comprise up to 10 steps. Operations can be repeated, reordered, etc. Each tank has its own icon and name, allowing the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be operated between processes or at the end of a cycle, for example. • Controls mounted on a pivoting arm for improved accessibility • PLC microprocessor control Dodpfx Agefz Nblspoup • 7" touch panel • A very large number of nozzles compared to other solutions • (Optional) Drying function after washing • Capability to create custom advanced programs • Advanced damper system made of acid-resistant sheet steel, double-secured with limit switches • Control system for tight closing and full opening of flaps • To minimize fluid mixing, separate lines, nozzles, and tanks are provided for each treatment • Intelligent control – In case of a power failure or sudden shutdown, fluids cannot be mixed • Fully automatic operation

Leto izdelave: 2001, obratovalne ure: 123 h, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Dodpfx Agsftdv Uopjup Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Leto izdelave: 2020, stanje: novo, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, saving money and improving washing quality. This is crucial, as the apparent savings from systems that do not utilize these solutions can ultimately lead to much higher costs associated with the disposal of chemicals and waste, which will simply be greater. Attention should also be paid to maintaining the required bath parameters. Research and development have enabled us to develop a car wash system with an optional detail drying function, where hot air is blown onto the parts by a fan after washing. Dujdpfxjfy T Rcs Agpop The car wash system is equipped with an advanced macroprogramming system, where each program, depending on the number of tanks, can comprise up to 10 steps. Operations can be repeated, reordered, etc. Each tank has its own icon and name, allowing the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be operated between processes or at the end of a cycle, for example. • Controls mounted on a pivoting arm for improved accessibility • PLC microprocessor control • 7" touch panel • A very large number of nozzles compared to other solutions • (Optional) Drying function after washing • Capability to create custom advanced programs • Advanced damper system made of acid-resistant sheet steel, double-secured with limit switches • Control system for tight closing and full opening of flaps • To minimize fluid mixing, separate lines, nozzles, and tanks are provided for each treatment • Intelligent control – In case of a power failure or sudden shutdown, fluids cannot be mixed • Fully automatic operation

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Dsdpswtgcxofx Agpsup Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viessmann Vitoplex 700 kW Year: 2014 Model: SX2A Dedotu T I Ujpfx Agpjup Output: 700 kW Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information is provided without guarantee; subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typographical or data transmission errors. Naturally, we will also handle all formalities. Loading possible Request more information

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C Dedewp Rqfepfx Agpjup • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, 1 unit used CONCRETE BATCHING PLANT Manufacturer: Liebherr Model: Betomix 1.0 Year of manufacture: 2006 Theoretical capacity: 60 m³/hour compacted concrete Aggregate bins: 120 m³ (4 x 30 m³) in linear aggregate silo with weighing belt Mixer: Liebherr ring pan mixer 1.0-R Dosing: Aggregates: weighing belt Water: water scale Admixtures: admixture scale Cement: cement scale Control container included Control system: SIMMA Cement silos: 3 x 100 tons (transport dimensions D=3m, removable legs) Djdpjwk Hxhofx Agpeup INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY Price INCLUDES DISMANTLING All offers and prices are strictly net EXW location Subject to prior sale, errors and/or misrepresentations excepted, without warranty and/or guarantee, sold as seen, ex location, either lying or standing. Any reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza 6 izmetalnikov na desni izhodni mizi. Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumenti vključeni. Duedpfextxi Isx Agpjp

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, For sale: Complete sawmill operation The line starts with a Bongioanni band saw and a Costa Multiprisma saw. Designed for processing both soft and hardwood deciduous species. The price includes the entire machinery lines, auxiliary equipment (such as dust extraction and waste recycling machines), all necessary saw blades and spare parts. The sawmill can be inspected in Cegléd, Hungary by prior appointment. 1. Production Line: - 1-1 Log yard with log singulator - 1-2 Costa Multiprisma 280: twin-shaft canting and log rotator, throughput 60-80 m³/8hrs depending on wood type and diameter - 1-3 Roller conveyor with ejector - 1-4 Custom-built cross-cut saw: single sizing with adjustable cutting sizes - 1-5 Belt conveyors for bulky waste transport - 1-6 Drum chipper - 1-7 Chipper conveyors: screw conveyor, bucket elevator, chute, direct loading onto trolley/truck 2. Second Line: - 2-1 Log storage with singulator - 2-2 Log conveyor with ejector - 2-3 Intermediate log yard with singulator - 2-4 Bongioanni log band saw with carriage, 1300mm, digital control, pre-set size options, blade deviation indicator, laser guide, 25-45 m³/8hrs (depending on wood type, diameter and sawing pattern) - 2-5 Roller conveyor with ejectors - 2-6 Cross transfer conveyor with singulator - 2-7 Storti TGS-78 cross-cut saw: digital control, three saw units for double-size cutting ability - 2-8 Roller conveyor with grading sections - 2-9 Intermediate cant storage - 2-10 Roller conveyor - 2-11 Costa Leopard II edger, 2-shaft with automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Belt conveyors for bulky waste - 2-14 Drum chipper - 2-15 Chipper conveyors: screw conveyor, bucket elevator, walking floor for truck loading 3. Auxiliary Equipment: - 3-1 E. Gillet resaw, with conveyors, manipulator, and infeed unit - 3-2 Joinery bandsaw (800 mm) - 3-3 Pallet block cross-cut saw (star wheel type) - 3-4 SOCOLEST Valdoi twin edger circular saw with conveyors and cross-cut circular saw Duedpfx Ajv Hm T Sogpjp - 3-5 VEB STANDARD single-shaft panel saw - 3-6 STVO single-shaft panel saw

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in strips (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12–18 Top pressure: V-belt driven (C.N.) Sprayer unit (for liquid release agent) AAR Adjustable fence, CNC controlled "EASY SIZE PLUS" Jointing unit 2 x kW Radiator for edge heating of workpieces Gluing section (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressing zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Pre-milling unit RS/K Milling unit RI/800 (3 positions) Multi-function unit (radius/profile milling) “4 EDGE” KIT Spray unit (for sliding agent) Profile scraping unit RAS/1000 Flat scraping unit RCA/2C Universal router for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge trimmer Dsdpfxexlqntj Agpoup Return direction "SAG" Mod. SPINNER 47 / 63)