Avtomatski sistem čiščenja

Romer Mietkauf / Leasing MAS-30-2

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 9518 202-5, Offer 24361 Technical Specifications: - 3 individually motor-driven rollers, manual and CNC-controlled operation - Max. torque per roller: 1600 Nm - Vertical stroke of bending roller (X-axis): approx. 265 mm - Lower rollers adjustable laterally: 200 – 1000 mm - Shaft diameter: 105 mm - Roller diameter: up to approx. 260 mm - Usable length of standard shafts: approx. 300 mm - Infinitely variable shaft rotation: 1 – 22 rpm - Bending capacity e.g.: - Round tube 1": Ø 350 mm - Round tube 4": Ø 2000 mm - Flat bar 300 x 15: Ø 600 mm - Roller drive: 400 V / 3 x 1.1 kW - Hydraulic drive: 400 V / 3 kW - Weight: approx. 1200 kg - Accessory weight: approx. ... kg - Required space approx.: W 1250 x H 1400 x D 1700 mm Blsdpjt Nfv Tofx Afqsr - Equipped with: - PC 100 control in separate console - Side straightening rollers adjustable horizontally and vertically - Standard bending set for flat and angle steel - Roller sets for steel and plastic tubing

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Drying via hot air and vacuum drying. Bjdpfx Aohu Sg Isfqslr Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Maximum load weight: 150 kg Loading table in front of the machine included Control: Siemens S7-1200 with 20 programs

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk. Bedpfefz I Ehsx Afqslr

Stanje: rabljeno, številka stroja/vozila: 0001210226, Model table size: 236 x 460 mm Work table size: 200 x 500 mm Longitudinal travel: 300 mm Cross travel: 160 mm Spindle speeds: 1,900 - 15,000 rpm Milling ratio: 1 : 1 105x165 / 1 : 5 44 x 80 mm Required space: 800 x 900 x 1,250 mm Bjdpfx Aobv S Elefqslr Weight: 340 kg

Leto izdelave: 2005, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.600 kg, največja dovoljena obremenitev: 1.000 kg, notranja višina: 1.200 mm, notranja dolžina: 1.390 mm, notranja širina: 1.390 mm, nazivna moč: 64.000 kW (87.015,68 KM), zmogljivost črpalke: 500 l/min, tlak črpalke: 450.000 letvica, kapaciteta rezervoarja za vodo: 800 l, številka stroja/vozila: 25191, Industrial machine and parts cleaning device. Equipped with 3 washing chambers: one main and two auxiliary. Technical condition: Excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main machine components: - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle - High-pressure piping - Control cabinet - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure indicators - Automatic water filling and chemical dosing system Bedpfx Afsrkz Stsqjlr Additionally, the set includes a reverse osmosis water filter.

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Bedpol D Ex Dofx Afqjlr

Stanje: rabljeno, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travels (X, Y, Z): 320 x 220 x 180 [mm] - Table traverse speed: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] Bledpouhcbcofx Afqer EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic wire threading

Leto izdelave: 1975, Stanje: zelo dobro (rabljeno), Bell shape: round Bell opening: 525 mm Bsdpfxofgd S No Afqslr Bell depth: 620 mm Volume: 170 L Loading weight: max. 150 kg *With timer control 0-60 min.*

Stanje: rabljeno, Leto izdelave: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control unit: HEIDENHAIN iTNC 530 HSCI Table size: 7,500 x 3,000 x 300 mm Distance between columns: 3,800 mm Rapid traverse x/y/z: 30,000 mm/min Tool holder: HSK 100 Spindle speed: 6,000 rpm Gear stages: 2 Motor power: 37 kW Bedexb Ed Uepfx Afqelr Operating hours: 28,475 h Spindle hours: 12,629 h Tool changer: 60 positions Internal coolant supply: 36 bar Chip conveyor: dual Milling head: 5-axis milling head OAD Total power requirement: 80 kVA Machine weight: approx. 85 t OAD milling head fully water-cooled. - 6,000 rpm without time limitation. - Patented rotation system by Correa with stationary double-toothing enables rotation every 0.02º. As it does not involve a freely moving toothing, maximum rigidity and precision are ensured. - Allows negative angles up to 45 degrees. - Milling spindle model FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension model AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Stanje: novo, Stroj za tlačne vzmeti Ø2,0 mm/2-osni. Pogon s pomočjo odmičnika (cam-driven). Bsdpfelf Ek Dox Afqelr