Univerzalni rezkalni stroj

Rogi WM6432

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, Ncjdpfxep E T N Ae Agxjr prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili.

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Nodpjb U Hwpjfx Agxjcr Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Nedpfx Agorqwbisxscr Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Univerzalni orodjarski rezkalni stroj DECKEL FP 3 S troosnim aktivnim digitalnim prikazovalnikom Heidenhain TNC 11 Leto izdelave: 1984 Pomik: X 500 Y 300 Z 400 mm Območje obratov: 25 – 2500 min⁻¹ Z naslednjo opremo: Toga kotna miza 850 mm x 400 mm vpenjalna površina Zasukalna vrtljiva miza Ø 450 mm z delilnimi ploščami Stružna glava Premična navpična rezkalna glava Izvlečna vrtalna puša Brezstopenjski podajalnik preko potenciometra Različni rezkalni trni SK 40 / S22 x 2 Kad za ostružke Centralna mazalna črpalka (avtomatska) za osi X, Y, Z Strojna luč Hladilna naprava 4 kosi strojnih nog Navodila za uporabo Ncjdsxuh Rdjpfx Agxor

Stanje: rabljeno, Tehnične podrobnosti: x-hod: 700 mm y-hod: 450 mm Nsdpfx Agevc Avhsxecr z-hod: 450 mm Vretena konus ISO: 40 (SK 40) Pritrdilna površina mize: 760 x 420 mm Podolžni pomik mize: 10 - 500 mm/min (hitri hod: 1,4 m/min) Vertikalni pomik mize: 5 - 250 mm/min (hitri hod: 1,4 m/min) Vretenaste hitrosti - brezstopenjsko: 32 - 1600 / 18 stopenj vrt./min Vretenasta glava nagibna levo/desno: 10° levo/desno Vertikalni hod pinole: 125 mm Pomik brezstopenjsko: 10 - 500 / 8 stopenj mm/min Hitri hod: 1,4 m/min Skupna priključna moč: 6,5 kW Teža stroja cca: 3,0 t Dimenzije stroja DxŠxV: 2,3 x 2,0 x 1,85 m Dodatne značilnosti: Domet vretenaste glave min./max.: 2094 / 2544 mm Oprema: - Hladilna črpalka z dovodom - Linearni merilni sistem – Heidenhain ND750 Dodatna oprema: - Strojski primež

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment Ncodeh I Nqwopfx Agxjr • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch Ncsdpfob U Hwmjx Agxor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Universal tool milling machine with gear transmission, travel distances X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 speeds 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left/right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/tilting table, dimensions 1500x1700x1750 mm, approx. 2200 kg Ncsdpfx Asfvci Esgxsr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 95 h, nosilnost: 200 kg, dvižna višina: 13.000 mm, gradbena višina: 2.100 mm, vrsta goriva: električni, vrsta pogona: Elektro, Členasta teleskopska dvižna ploščad Tehnično stanje: zelo dobro Sprednje pnevmatike tip: polna guma Sprednje pnevmatike dimenzija: 600x190 Zadnje pnevmatike tip: polna guma Zadnje pnevmatike dimenzija: 600x190 Baterija volt: 48V Nedpfx Aevky D Sjgxocr CE certifikat,

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, Njdpfx Aet Hw Shogxjcr emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice