Linearni transporter / vibracijski transporter / sortirna naprava; vibracijski spiralni dozirnik, vi

RNA

Stanje: rabljeno, Vibracijski podajalnik (skledni podajalnik), RNA, Rabljeni stroj Proizvajalec: RNA Tip: — Skupne dimenzije: Širina: 750 mm Globina: 680 mm Bcsdpeyn Rntefx Ag Tjw Višina: 450 mm Električni podatki: 230V; 6A; 50Hz Velikost sklede: 350–640 mm

Stanje: rabljeno, Vibratory bowl feeder / Sorting device / Spiral elevator / Vibratory feeder RNA Vibratory bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power connection: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Feeder weight: 52 kg Linear feeder / Vibratory feeder / Sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year: approx. 2000 Maximum rail length: 700 mm Usable load: approx. 1.5 to 2 kg Oscillation frequency: 100 Hz / 6000 rpm Power connection: 220 Volt, 50 Hz - Oscillation plate L x W x H 400 x 65 x 12 mm - Mounted rail length 530 mm - Installation height with oscillation plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Linear feeder weight: 20 kg Control unit for vibratory drives, regulator, controller, control system for vibratory feeder / sorting device / spiral elevator / vibratory bowl / oscillating feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Power supply: 0 ... 208 Veff; (230VAC during motor operation) at 230V mains voltage 0 ... 98 Veff; (115VAC during motor operation) at 115V mains voltage Output voltage: 0...208 V (eff.), adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 Aeff Sensor inputs: 1 Bcedpfx Asuzn Nneg Tsw Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time settings (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, spiral feeder RNA SRC-N 550mm Vibratory Feeder with Controller Manufacturer/Model: RNA SRC-N 250-2R Top Bowl Diameter: 550 mm Lower Bowl Diameter: 250 mm Voltage: 230 Volt, 50Hz Protection Class: IP 44 Vibration Frequency at 100Hz: 6000 rpm Vibration Controller Lower Bowl Diameter: 250 mm Upper Bowl Diameter: 380 mm Inner Bowl Height: approx. 70 mm Overall Dimensions: Height: 700 mm Width: 600 mm Bcsdpfowav R Sjx Ag Tjw Weight: 80 kg In good condition!

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, RNA vibratory feeder with linear conveyor and control unit. Rated vibration frequency: 50 Hz with dual speed regulation Manufacturer: RNA Model: ESK-N80 Bjdsh S Il Tjpfx Ag Tscw Bowl diameter: 700 mm Voltage: 220 V, 50 Hz Protection class: IP30 Vibration rate: 3000 cycles/min Vibration regulator: RNA Height-adjustable stand + linear dosing unit Length: 1,520 mm

Stanje: zelo dobro (rabljeno), RNA vibratory feeder with 900 mm diameter, bowl feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Model: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 rpm Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Discharge height: 167 mm B = Track width: 50 mm D = Bowl diameter: 980 mm Bedpsh Iy Ttefx Ag Tscw H = Bowl height: 250 mm S = Track pitch: 81 mm

Stanje: dober (rabljeno), Vibratory bowl for screwdriving technology Bowl diameter: 320 mm Bcedpfx Agjg Anduo Tsw

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Feeder RNA Vibratory bowl, sorting unit / screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Bodpexrgvmsfx Ag Tocw Type: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was previously used for the supply of automotive blade fuses - Mounted on a base made of aluminium profile system Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl which orients the parts 2) Drive unit, which generates vibrations in the sorting bowl through mechanical oscillations, causing the parts to move.

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Bowl Feeder / Vibratory Feeder RNA Vibratory Bowl, Sorting Device / Screw Feeding System with Vibratory Feeder for Screwdriving Technology Feeding System, Feeder Unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of Manufacture: approx. 2000 Bowl Diameter (top): 200 mm Bowl Diameter (bottom): 130 mm Bowl Inner Height: approx. 25 mm Sorting Track Width: approx. 3 mm Bcedpexw Rdlefx Ag Tow Overall Height (Drive + Bowl with Sorting Track): 225 mm Control Voltage: 24 V DC (external power supply required) Mains Connection: 230 V, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller has no internal 24VDC power unit). - Control unit REO Type Reovib R6 / 439 for adjustable vibration speed - The feeder was previously used for feeding automotive blade fuses - Mounted on an aluminium profile stand Space requirement (Ø x H): 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates mechanical oscillations to vibrate the sorting bowl and thus set the parts in motion.

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Feeder RNA Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screwdriving Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter upper: 300 mm Bowl diameter lower: 180 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - RNA Control Unit, Type ESG 90 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl by mechanical oscillations and thereby moves the parts. Bedpfeu Ailgox Ag Tocw

Stanje: rabljeno, Convoyeur à spirale vibrante / appareil de tri / convoyeur à spirale / alimentateur vibrant RNA Bol vibrant, appareil de tri / alimentation de vis avec alimentateur vibrant pour la technologie de vissage Système d’alimentation, appareil d’alimentation Fabricant : RNA Rhein-Nadel Automation GmbH Type SRC-B200-2L Année de construction : env. 2000 Diamètre supérieur du bol : 250 mm Diamètre inférieur du bol : 190 mm Hauteur intérieure du bol : env. 35 mm Largeur de la voie de tri : env. 3 mm Hauteur totale (entraînement + bol avec voie de tri) : 240 mm Raccordement électrique : 230 V, 50 Hz - Régulateur RNA, type ESG 90 pour vitesse de vibration réglable - Le convoyeur a été utilisé pour l’alimentation de fusibles automobiles à languette Bcedpfx Ajxf Urpeg Tew Encombrement Ø x H : 250 x 240 mm Poids : 13,5 kg Bon état Un convoyeur à spirale se compose toujours de deux éléments essentiels. 1) Bol de tri, dans lequel les pièces sont orientées 2) Entraînement, qui génère des vibrations dans le bol de tri par des oscillations mécaniques et met ainsi les pièces en mouvement.