Naprava za vleko

RMG 910-2563-21

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Gkedpfxjw D Aq Tj Abroc Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: rabljeno, Leto izdelave: 1979, Premer reza: 440 mm Teža stroja: cca. 780 kg +++++ Gkodpef Dwa Usfx Abroc Upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videoposnetka nista mogoča. Naš oglas vsebuje najrelevantnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Gkjdpfotmqi Djx Abrsc The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), An old Schumag Aachen drawing machine without control system is available. Drawing force: 100 kN, drawing speed: 80 m/min, material diameter range: 25 mm - 43 mm. An on-site inspection is possible. Gkedov Tctuepfx Abrjc

Stanje: novo, Leto izdelave: 2024, premer žaginega lista: 315 mm, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, vrtljajska hitrost (min.): 17 obr/min, največja hitrost vrtenja: 33 obr/min, BERG+SCHMID Vertical Circular Saw Model VKS 315 Speed: 17 + 33 rpm • Mitre cuts: left 60° + right 45° • Vise with double clamping arm (4-way locked) for burr-free cuts and lateral quick adjustment • Saw table with large rotary plate and particularly stable vise for optimal material clamping • Robust prism guide for the saw head (adjustable dovetail guide) • Automatic coolant system Gsdorrvn Aepfx Abrekc • Machine base with chip drawer • Metal lever for high clamping force • Counterholder with spring package included Saw blade dimensions: 315x40mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: from stock Waiblingen Beinstein

Leto izdelave: 2000, stanje: dober (rabljeno), Technische Daten Stanz-/Schersystem Material * Flachstahl Länge: 6.000 mm Breite: 50–500 mm Dicke: 5–30 mm * Winkelstahl Länge: 12.000 mm Maße: 50 x 50 – 150 x 150 mm Dicke: max. 15 mm Stanzmaschine VPO 1400 Kapazität: 1.400 kN (140 t) Stanzdurchmesser/Materialdicke (max.): 32 mm / 25 mm Stanzen in Flach- und Winkelstahl: ja Anzahl der Stempel für Flachstahl: 4 Anzahl der Stempel für Winkelstahl: 1 Hydraulische Klemmung: ja Zentrierzapfen: ja Minimalmengen-Schmiersystem: ja Schere für Flachstahl VPS 1800 Kapazität: 1.800 kN (180 t) Breite/Materialdicke (max.): 500 mm / 22 mm Hydraulische Klemmung: ja Gehrungsschnitt: +/- 45° Winkelschere VHS 1800 Kapazität: 1.800 kN (180 t) Geeignet für Winkel: 50 x 50 x 5 bis 150 x 150 x 15 mm Hydraulische Klemmung: ja Stanzeinheit für Winkelstege Kapazität: 600 kN (60 t) Stanzdurchmesser/Materialdicke (max.): 32 mm / 15 mm Nummeriereinheit Anzahl der Räder: 4 Stück Anzahl der Zeichen: 36 Stück Zeichenhöhe: 10 mm Anzahl der Zeichen pro Code: standardmäßig max. 16 Prägetiefe: ca. 1 mm Elektrische Anschlusswerte: 3 x 415 V AC + N + PE, 50 Hz Gkedpfx Aoq Hu H Robrjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, Fracture device for detecting internal defects. Bar diameter: 10 - 45 mm Bar material: extruded non-ferrous bars Machine weight: approx. 3 t Bending and Fracture Device Simple and robust device for breaking bars to inspect the fracture surface for internal defects. +++++ Please note that the machine is dismantled and ready for loading. For this reason, a powered demonstration or production of a video is not possible. Gkodpoit Ev Tefx Abrjc Additionally, our listing contains the most informative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Zelo dobro ohranjena dvotlačna stiskalnica DL5 znamke Heuer Hammer. Takoj pripravljena za uporabo. Gkodpfx Aexzft Njbrsc

Stanje: rabljeno, Ravnalnik in polirnik WRPT2, proizvajalec KIESERLING Premer palic: 10 - 35 mm Gkodpfeymcm Eox Abrec Dolžina palic: 3 - 6 m Obseg dobave zajema: 1. Vhodni podajalni valj (pinch-roll) z: - Spodnjim motornim valjem - Zgornjim valjem iz Vulkollana 2. Ravnalnik KIESERLING WRPT2 z: - Dvovaljnim ravnalnikom z nastavljivo višino zgornjega valja in prilagoditvijo zgornjega/spodnjega kota - Dvema motorreduktorjema s kardansko povezavo - Vhodnim vodilom - Stranskim vodilnim nosilcem - 1 komplet stranskih vodil 3. Izhodni podajalni valj (pinch-roll) z: - Spodnjim motornim valjem - Zgornjim valjem iz Vulkollana 4. Električna omarica s tipkami za ročno upravljanje gibov Premer palic: 10 - 35 mm Dolžina palic: 3 - 6 m

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), SEMA Machinery Engineering Type MT-40-C Technology: Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC Control: SIEMENS 840 D SL Dimensions & Weight - Required floor space (Left/Right): 13,480 mm - Required floor space (Front/Back): 10,502 mm - Overall height: 4,532 mm - Total weight: approx. 23,000 kg Electrical Connection Data - Total power consumption: 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Godpfxowf R N Hs Abrokc Base machine with 11 stations 1. Station 1: Component loading with multi-axis handling. 2. Station 2: Turret *Sauter 112* (3 spindle units, HSK 40) with internal coolant supply (IKZ), max. speed 15,000 rpm. 3. Station 3: Turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × spindle unit SE-HSK 50C with internal coolant, max. speed 15,000 rpm. 5. Station 5: 1 × turret *Sauter 112* (3 spindle units, HSK 40) with internal coolant supply (IKZ). 6. Station 6: 1 × turret *Sauter 112* (3 spindle units, HSK 40) with internal coolant supply (IKZ). - Additionally: 1 × 2-axis unit *SEMA AE1-35/50/NC*. 7. Station 7: Hydraulic docking unit incl. C-axis positioning unit. - Equipment: 7 × 2-axis units *SEMA AE1-35/50/NC*. 8. Station 8: Hydraulic docking unit incl. C-axis positioning. - Additionally: 1 × fixed integrated angle head. 9. Station 9: 1 × 2-axis unit *SEMA AE3-35/50/NC*. 10. Station 10: Fixed integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blow-off (internal/external). --- Notes on structuring: - Information is grouped by topic (control, dimensions, electrical, stations). - Technical details like spindle types, cooling, or speeds are listed precisely. - Models and manufacturers (*Sauter, SEMA, Benz*) are highlighted. - Stations 7 and 8 are distinctly separated to avoid confusion. - Consistent formatting for better readability. Additional Information: Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity: 210 KW Availability date: 05/2025 Weight: 23 t