Vodni hladilnik 5040W hladilna zmogljivost

Rittal SK 3336.509

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Codpfjiyyf Isx Ahxjgt Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swiveling range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum indexing increment: 2.5 [degrees] - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLESTOCK - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK Cedpfxoylc R Uo Ahxogt - Taper type: MT4 - Quill diameter: 50 [mm] - Quill travel: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 20 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] ACCESSORIES - Control: FANUC Oi-TD - Electronic handwheel - 3-color status indicator light - Oil mist extraction unit - Direct measuring systems for axes: X / Z - Dynamic balancing of grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Stationary dressing device - Workpiece touch probe - Coolant tank: 375 [l] * with paper filter

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm Csdpfsuxft Eex Ahxogt - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: generalkompletno obnovljen (rabljeno), Carpigiani specialized service – 100% refurbished machine. Equipped with new pumps, complete gasket set, new blades; essentially a like-new unit. Features include pasteurization function, 2+1 flavours, two 20-litre hoppers, 65 kg/h output, air-cooled. 2 units available. Cgedpfx Aewi U N Sehxst

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljene različne 3R sisteme. Sistemi so v zelo dobrem stanju in popolnoma delujoči. Ogled možen po predhodnem dogovoru. Pozicija 1 System 3R-203 rotacijski element WEDM 360° Pozicija 2 System 3R-201J adapter WEDM 90° Pozicija 3 System 3R-201J adapter WEDM 90° Pozicija 4 System 3R-201J adapter WEDM 90° Pozicija 5 System 3R-202 MiniBlock Pozicija 6 System 3R-202 MiniBlock Pozicija 7+8 System 3R-204 nastavljivi adapter po višini WEDM Pozicija 9 System 3R-218/30S seti nosilcev Pozicija 11 System 3R-602.21 ročno vpenjalno glavo Macro Pozicija 12 System 3R-294.3 primež Pozicija 15 System 3R-293.3 SuperVice Pozicija 17 System 3R-200-4J-2 470 mm System 3R-200-4J-2 470 mm System 3R-200-4J-2 330 mm System 3R-200-4J-2 138 mm Pozicija 18 System 3R-239–545 0006-V01 System 3R-239–495 Cgodpfx Ahexqn Uboxet Pošiljanje in ogled sta možna!

Stanje: dober (rabljeno), Leto izdelave: 2014, višina središča: 180 mm, širina na sredini: 600 mm, premer brušenja: 260 mm,

Stanje: rabljeno, Leto izdelave: 2017, Technical specifications: Grinding diameter: 280/320 mm Grinding length: 750 mm Cgsdpettxg Sjfx Ahxjt Centre height: 170 mm Machine weight approx.: 22.5 t Required space approx.: 4.7 x 3.65 x 3.0 m

Leto izdelave: 2023, stanje: novo, Chillers with various refrigerants and low GWP values available ex works on request. Cgodpfxshtfggj Ahxot We are happy to advise you on the different refrigerants, applications, and installation conditions.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, moč: 37 kW (50,31 KM), stiskalna sila: 250 t, hod: 150 mm, širina mize: 900 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm W: 200 cm L: 200 cm Cedpfjry Trpsx Ahxegt Weight: 16,000 kg. Can be loaded by crane upon collection and payment. Transport can be arranged. Sold on behalf of customer. Location: DK-7600 Struer. Please schedule an appointment for a viewing.

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naš kompaktni ekstruder model EX20-25d Proizvajalec: PMH GmbH Premer polža [mm]: 20 Dolžina polža [L/D]: 25 Cgjdpfx Ajq R Tkwohxjt Hitrost vrtenja polža [min-1]: 10–192 Polž: nitriran Navor: 55 Nm Pogon: trifazni motor s frekvenčnim pretvornikom Pogonska moč [kW]: 1,1 kW Material cilindra: nitriran Električne priključne vrednosti: 3 / N / PE Napajalna napetost [V]: 400 V pri 50 Hz Krmilna napetost [V]: 24 V Keramični grelni trakovi [W]: 1200 W Število grelnih trakov: 3 Maksimalni iztis: pribl. 5 kg/h Maksimalna procesna temperatura [°C]: 300