Horizontalni stroj za upogibanje

RHTC HB 28

Stanje: novo, Leto izdelave: 2026, Tlak: 28 t Pogon: 180 mm Velikost mize: 300 x 550 mm Premer bata: 130 mm Delovna hitrost, min.: 2 m/s Delovna hitrost, maks.: 9,8 m/s Hitrost povratnega hoda: 20 mm/s Najvišji tlak: 200 bar Teža stroja: pribl. 0,65 t Skupna poraba moči: 4 kW Potreben prostor: pribl. 1,15 x 0,75 x 1,1 m • Horizontalna upogljalno-ravnalna stiskalnica proizvajalca Profi Press je univerzalna hidravlična stiskalnica, ki je posebej zasnovana za izvajanje upogljalnih, profilnih in ravnalnih del. Uporaba stroja je raznolika in je odvisna od dodatne opreme, ki je nameščena na delovni mizi, nosilcu orodja ter v luknjah in izvrtinah. Nledpfx Aegvkmrobieg • Model HB-28 je opremljen z merilno lestvico za lažje upogljanje na delovni mizi, stiskalnica pa se lahko dobavi tudi z orodji (na primer matričnimi udarci), ki se lahko namestijo na nosilec orodja, ter z orodji, ki se lahko namestijo v luknje in izvrtine za izvajanje različnih del. • Hidravlični sistem se lahko regulira s pomočjo ventilov za nastavitev tlaka in pretoka, ki vplivajo na silo stiskanja in hitrost stiskalnice. Stiskalnica je opremljena z vgrajenim manometrom. • Nadzorna plošča služi za upravljanje in prikaz hoda bata ter za izbiro med ročnim in avtomatskim upravljanjem, model HB-28 pa je opremljen tudi z vgrajenim pomnilnikom za do 4 različne programe. • Upravljanje poteka preko električnih pedal.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Njdpfoh I Nqwsx Abislg Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: kot nova (razstavni stroj), Leto izdelave: 1988, številka stroja/vozila: 1116/87, MANUFACTURER: ELTERMA / IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR: 1988 CONDITION: New, unused; requires new control cabinet Nedpfxem E Tvhj Abielg Charge dimensions: 610x900x500 mm Maximum load: 500 kg Operating temperature: 150-750°C Approximate chamber heating time to 550°C: 30 minutes

Stanje: novo, Leto izdelave: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Flat capacity: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control. - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows for quick tool changes without any loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of accuracy even under high loads. - With the universal tool holder and various tools, you have maximum flexibility in your operations. Nljdpfjhgib Nsx Abijg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Bale press BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 75 kg. With a suitable pressing insert, it is also suitable for compressing individual metal and plastic containers, as well as cans. The bale press impresses with its easy and safe operation alongside its large loading aperture. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs and ensure material is properly returned to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Filling opening: 700 W x 698 H mm Pressing time: 24 seconds Motor: 1.5 kW 13 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for removal of bales Retention claws to reduce spring-back of material Holding device for strapping bands Quality product “Made in Europe” Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Nlsdpfxout Tk Hs Abieg Machine colour according to RAL Can-crusher insert PLC control system with automatic press cycle, bale ready indicator, and key-operated emergency stop Bale ejector with strap + PLC (instead of bale trolley) Strapping bands Power supply 380–400 V (3-phase) Bale press, paper press, waste paper press, cardboard press, cardboard baler, film baler, paper bale press, waste bale press, waste press, recyclable press, waste compactor, bin press, residual waste press

Stanje: potreben popravila (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade: 60 – 250 mm Motor power: 1.5 kW Nljdpfeuiy I Ajx Abijg Saw blade feed: 0–20 mm/min Cutting speed: 15–170 m/min (steel) 630–1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metal) Round working area: 5–70 mm (steel) Round working area: 5–50 mm (non-ferrous metal) Feed length: 5–500 mm 5–9999 mm (multiple stroke) Max. feed speed: 500 mm/sec Weight (saw): approx. 610 kg Dimensions LxWxH (saw): approx. 2500mm x 1000mm x 2000mm The machine is completely overhauled in-house according to customer specifications. Among other things, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of pneumatic feed and/or ball screw - Replacement of servo motor and servo drive - Replacement of frequency inverter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Optimization of extraction system - Maintenance of central and minimum lubrication systems - Replacement of general wear parts - Overhaul of machine body Additional features: - Minimum quantity lubrication for optimal sawing quality Due to its design and equipment, the machine is particularly suitable for mass cutting of steel with high precision tolerances. Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts on our systems. Labor time and consumable/wear parts are excluded from the warranty. Optional: - Conversion of the saw unit to a gearless main drive for cutting non-ferrous metals and plastics (speed 1,000–3,000 rpm) - 1,000 mm feed unit - 2,000 mm feed unit - 4 m angled magazine - 6 m angled magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for clamping round stock in bulk - Discharge system - Delivery and installation at your facility - Operator training

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 65.000 h, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, skupna višina: 2.355 mm, skupna masa: 14.000 kg, največja dolžina izdelka: 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has approximately 65,000 operating hours, and is in excellent condition. Contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm Nlodpfx Abex Nr Uxoijg • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating capacity: 61.2 kW • Number of electrical connection pins: 32 • Nozzle tip radius: R35 • Centring ring diameter: 200 mm • Robot interface: Euromap 67 • Number of core pull units: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Condition: In production Additional equipment: • Robot (equipped)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: CR690, skupna masa: 1.350 kg, nosilnost: 100.000 kg, Električni podvoz Robot komplet 100 ton - OX TBC 100 Samohodni vozički imajo veliko nosilnost 100 ton in zelo nizko višino. Zasnovani so z možnostjo popolnega vrtljaja 360º, da jih je mogoče postaviti pod katerokoli vrsto elementa in premikati. Na voljo so tudi modeli z motornim pogonom in hidravličnim dvižnim cilindrom za nakladanje v vozila ali na police. Največja hitrost znaša do 5 m/min. Dolžina – 1602 mm Širina – 2019 mm Nlsdpow Taikofx Abieg Višina – 315 mm Maks. nosilnost / dvižna moč – 100 ton Daljinsko radijsko upravljanje

Stanje: novo, Druck 80,0 t Hub 285 mm Flacheisen über die hohe Kante 300 x 25 mm Arbeitsgeschwindigkeit 10,0 mm/sec Rücklaufgeschwindigkeit 10,0 mm/min Arbeitshöhe 930 mm Tisch: 750 x 1425 mm Gesamtleistungsbedarf 10,0 kW Motor 400 Volt 50 Hz Ölinhalt 120 l Gewicht 1700 kg Abmessung L-B-H 1500 x 750 x 1800 mm Ausstattung : - elektro-hydraulische Horizontalbiegemaschine - großer, robuster Maschinentisch aus gehärteten Stahl - Maschine aus gehärtetem und geschliffenen Schmiedestahl - Digitalanzeige für Hubeinstellung * Programmierung von 1x Biegeendpunkt & 1x Rückzugspunkt möglich - 1x Werkzeugsatz (1x Biegestempel / 1x 1V Matrize) * Biegestempel .. Grad : 60° / Biegeradius : 5,0 mm * Matrize .. Grad : 85° / V Öffnung : 100,0 mm - stufenlose Einstellung der Biegegeschwindigkeit & Presskraft - 1x manueller Materialanschlag - freibeweglicher Doppel-Fußschalter Nedpfxexabhao Abijlg - Maschine mit Hubwagen/Stapler verfahrbar - Bedienungsanleitung

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 Nedoxn A Spopfx Abijlg max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB