Senat Filtrirne plošče filter plošče 1000

REWA R&B, Passavant, Filox, u.a.

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable Nodpfeifk Rbjx Adpewp with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Leto izdelave: 2021, Stanje: generalkompletno obnovljen (rabljeno), Diaform device, fully overhauled, for JUNG HF50 / JF520 Nsdpfx Adohcn R Ijpowp

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control Nsdsfxw H Aspfx Adpewp

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 240 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 430 mm, višina središča: 215 mm, stružna dolžina: 760 mm, poteza s peresom: 127 mm, premer tulec: 58 mm, skupna dolžina: 1.885 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.680 kg, nosilec puše: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Nwodscir Anopfx Adpop Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on counterface) of the cross and top slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and slide splash protection Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: fortlaufend, Centre height: 200 mm Centre distance: 1000 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 52 mm Speed range: 9–1600 rpm Spindle nose: Bayonet DIN 5027 KK6 Longitudinal feed range: 0.028–6.43 mm/rev (93 steps) Cross feed range: 0.012–2.73 mm/rev (93 steps) Metric threads: 0.5–224 mm (48 steps) Nodpfx Ao Nh Hxjdpjwp Inch threads: 72–1/8 tpi (46 steps) Module threads: 0.5–112 (42 steps) Diametral threads: 56–1/4 DP Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Equipment/accessories: Digital readout for 3 axes (SINO brand), 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed and travelling steady rest, coolant system, splash guard, rapid traverse, manual central lubrication, 4-way tool post, work light.

Stanje: rabljeno, Leto izdelave: 2014, DOOSAN DNM 650 II MACHINING CENTRE YEAR OF FIRST INSTALLATION: 2014 CNC: SIEMENS SINUMERIK 828 D TABLE DIMENSIONS: 1,300 mm x 670 mm MAX. TABLE LOAD: 1,000 KG TRAVEL STROKES: Nsdpfx Aowcg I Todpowp - X: 1,270 mm - Y: 670 mm - Z: 625 mm TOOL MAGAZINE: 30 POSITIONS TAPER: ISO 40 MAX. SPINDLE SPEED: 12,000 RPM INTERNAL SPINDLE COOLANT / HIGH PRESSURE SPINDLE MOTOR POWER: 15 KW MACHINE IN PERFECT CONDITION COMPLETE WITH FULL DOCUMENTATION WEIGHT: 8,500 KG

Stanje: nepreverjeno (rabljeno), Stroj za izdelavo vrečk za tekočine, primeren za vroče ali hladno polnjenje. Idealen za pakiranje juh, omak, začimb (kečap, gorčica, majoneza), solatnih prelivov, izdelkov na osnovi paradižnika (pica omaka, omaka za špagete), tekočih jajc. Na voljo imamo dve enaki napravi iz iste tovarne omak. V ponudbi imamo tudi številne druge stroje, kot so kotli, hladilniki omak, glikolni hladilniki itd. Nodpfjig Ht Isx Adpjwp

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: 4ROLL 3000X 15 MM, premer spodnjega valja: 270 mm, premer zgornjega valja: 290 mm, premer stranskega valja: 250 mm, premer valja: 310 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 800 mm, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, maks. debelina aluminijaste pločevine: 20 mm, najv. debelina bakrene pločevine: 25 mm, skupna masa: 8.500 kg, skupna dolžina: 5.100 mm, skupna širina: 1.500 mm, skupna višina: 1.800 mm, moč: 7,35 kW (9,99 KM), število digitalnih zaslonov: 2, trajanje garancije: 12 meseci, premer stožca: 400 mm, delovna dolžina: 3.000 mm, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna dvostruka pre-pinčna savijačica NOVA - Širina lima: 3000 mm - Debljina lima za savijanje: 15 mm Nodpswfc S Tsfx Adpswp - Debljina lima za pre-pregib: 12 mm - Minimalni savijeni promjer (ID): 350 mm Dimenzije valjaka: - Dužina površine: 3100 mm - Gornji valjak: 290 mm - Pinch (pritisni) valjak: 270 mm - Elektromotor: 10 KS Tehnički podaci: - Valjci s kaljenom površinom, visoka otpornost - Varijabilna brzina savijanja - Hidraulički pogon rotacije valjaka - Priključak za konično savijanje (valjkaste izvedbe) - Sustav kalibracije za dosavijanje zavarivanih školjki - Pritisak pinch valjka podesiv prema debljini lima - Zaštita od preopterećenja za potpuno sigurnu rad mašine - Upravljačka konzola na kotačima s električnim joystick komandama - Digitalni prikaz položaja s mogućnošću memoriranja i ponavljanja procesa savijanja

Stanje: novo, WM180V - ROGI variable speed metal lathe 230V-1Ph Swing over bed ----- 180 mm Swing over cross slide ----- 110 mm Centre height ----- 90 mm Distance between centres ----- 300 mm Bed width ----- 100 mm Cross slide travel ----- 75 mm Compound slide travel ----- 55 mm Spindle bore ----- 21 mm Spindle taper ----- MT3 Spindle speed range ----- variable 50 - 2500 rpm Thread cutting Whitworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Tailstock quill travel ----- 60 mm Tailstock quill diameter ----- 30 mm Tailstock taper ----- MT2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool post * Drip tray Nsdpfx Aoga T Ebsdpswp * Rear splash guard * Chuck guard * Leadscrew guard * Tool slide guard * Set of change gears * Digital speed readout * Fixed centres * Forward / Reverse switch * Tools in box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed steady rest * Follow rest * Face plate 170 mm * Stand * TOOA0 quick change tool post * Turning tool set

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic Punching Machine Nedern Swkopfx Adpewp Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: • Punching force: 28 t • Worktable dimensions (width x length): 500 x 1000 mm • Maximum sheet thickness: 6 mm (up to 40 mm punch diameter) • Maximum die diameter: 105 mm (up to 1 mm sheet thickness) • Maximum strokes: 180 strokes/min • Connected load: 5 kW • Voltage: 3 x 400 V / 50 Hz • Total weight: 2 tons • Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm • Tool cabinet, 4 drawers for tools • Foot pedal • All accessories shown in the photos are included.