Kiper tovornjak

RENAULT LANDER-KERAX 430 DXI+BIBENNE

Stanje: rabljeno, Leto izdelave: 2002, Bottle washer, manufacturer: Krones, model: Lavatec KESK 245/17-120, capacity range 4,000 - 11,000 bottles/hour, suitable for bottles with a maximum diameter of 105 mm, year of manufacture 2002, single-end machine, equipped with 180 rows with 17 bottles per row, with pre-rinsing using water and lye, main lye bath with immersion and post-lye spraying, 3-stage water spraying (hot, cold, and fresh water) for sale. Todpfxorxup So Abgef

Stanje: rabljeno, Leto izdelave: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washing machine was previously used in a brewery, operating in single-shift mode. Due to a decline in sales volume, the brewery’s beer is now being bottled at another site, freeing up this bottling line. Thanks to its low operating hours and regular maintenance, the machine is in excellent condition. All tanks and the machine frame are made of stainless steel. Spare parts, such as bottle cells, are also still available. In addition, the main drive shaft as well as the SEW motor and gearbox were overhauled in 2018, and the conveyor chain was replaced in 2015. The machine is still installed and can be demonstrated. Technical data: - Capacity: 23,000 bottles/hour - Cell pitch: 85 mm - Bottles per row: 16 - Dimensions & weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side left - CE certified - Chemical dosing pumps - Machine specification sheet available - Fixed-pipe sprayers controlled by machine cycle - Single-ended machine - Label discharge rear right - Finger discharge and finger feed - Bottle discharge left - Bottle cells plastic - HMI Lauer - Caustic concentration monitoring - 24V control voltage Tjdpfx Abel Hx Adegef - S5 control system (conversion to S7 available on request) - Regularly serviced - Stainless steel water share - Steam extraction - Sampling valves - KSB pumps in stainless steel - Insertable strainers for baths - Water meter - Conductivity measurement by Endress Additional features: - Spare parts included

Stanje: rabljeno, Leto izdelave: 1995, Overview The "Sirio 7" bottle washer from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical Details • Capacity: up to 7,000 bottles/hour • Bottle cells designed for 1.0-liter bottles (smaller bottles can also be run; additional guide plates are required) • Bottle diameter: 78 – 90 mm • Bottle height: 288 – 310 mm • Bottle cells per row: 10 • Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm Tsdpfetrbrqjx Abgef • Empty weight: 14,300 kg • Full-load weight: 25,600 kg • Installed power: 20.85 kW • Heating system: steam, 3 bar

Stanje: rabljeno, Leto izdelave: 2024, Overview The bottle washing machine was previously used in a brewery. Due to the low number of operating hours, the machine is in excellent, as-new condition. It was replaced because the previous owner required bottle formats that were incompatible with the machine. All tanks and the machine body are made from stainless steel. The machine is already dismantled and has been stored dry, making it easy to load and transport. The machine is sold with a 12-month warranty. Technical Data: Capacity: 9,500 bottles/hour Cell pitch: 95 mm Bottles per row: 25 Dimensions & Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Operational with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg Year of manufacture: 2024 Formats: 0.25l, 0.33l, 0.5l, 0.75l Machine details / features: - Heated via steam - Pre-rinsing and removal of residual liquids by means of pulsed flushing before washing - CE-certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-jetting - Rotating spray nozzles - Single-end machine - Finger bottle infeed/discharge - Bottle cells made of plastic - Concentration measurement - Liquid NaOH feed - Spindles made from stainless steel - 24 Volt control voltage - Siemens S7 control system Todpsvrfivsfx Abgef - Complete stainless steel machine body - Caustic extraction - Machine dismantled, ready for dispatch - Automated machine start (heating up, etc.)

Stanje: rabljeno, Leto izdelave: 2013, Overview The bottle washing machine was manufactured by the German company Krones in 2013 and commissioned in 2014. It has been serviced annually. Additionally, an alkaline detergent cleaning system and spare parts can be purchased. DISMANTLING INCLUDED. Technical Data Capacity: 66,000 bph Maximum bottle diameter: 69 mm Configured for the following formats: Vichy 0.33l, Long-Neck 0.33l, Long-Neck 0.5l, NRW 0.5l, Steinie 0.33l Todol Hx Enepfx Abgef

Stanje: rabljeno, Leto izdelave: 1996, Chamber pasteurizer for 4 pallets Machine (additional info): Pasteurization unit for 4 pallets Pallet positions: 4 units Length: 530 cm Width: 220 cm Height: 305 cm Material: Stainless steel Location / Position: free-standing Tedpfjwrbdujx Abgef

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 14.000 mm, skupna širina: 8.000 mm, skupna višina: 4.800 mm, 2 Systeme im Laminierbereich: 1 x 14 m x 8 m (7,7) x 4,8 m 1 x 27 m x 8 m (7,7) x 4,8 m Beschickung Lamiline: Pos. 01 Leichtlauf-Überkran, Typ A 250/190S 14 x 8 m 2 Längsschienen à 14 m, ca. 1 m Kabelfahrweg und eine manuell verfahrbare Doppelbrücke à 8 m, inkl. 6 Stahlstützen mit Aufhängepunkten sowie sämtlichen Verbindungen, Laufwagen, Kabelwagen und Luftschläuchen. Tsdsw Dc I Sspfx Abgsf 01-1 Reibradantrieb für Brückenfahrt inkl. Ausrückvorrichtung 2 elektrische Reibradantriebe für die Brückenfahrt, Fahrgeschwindigkeit 5/20 m/min. Inkl. Steuerungsintegration in das Bedienpanel des Leichtlaufhebers Pos. 02 Leichtlaufheber inkl. pneumatischer Kipp- und Drehfunktion, Typ LKD 250 S 70 Tragfähigkeit 250 kg, das Heben und Senken erfolgt über einen in das Hubrohr eingebauten Pneumatikzylinder und kann stufenlos vom Bediener geregelt werden. Der Heber kann mittels Vorrichtung im Hubrohr sehr leicht manuell um 360° gedreht werden. Der Saugrahmen kippt pneumatisch von 0 - 90° und rotiert ebenfalls pneumatisch von 0 - 180°. Am Saugrahmen befinden sich 7 runde Saugteller, Ø ca. 290 mm (wegen der Schutzhauben), davon sind 4 ausziehbar. Die 3 mittleren Sauger sind verstellbar. Eigengewicht: ca. 120 kg Erforderlicher Luftdruck: 7 bar, 1/2" Druckluftanschluss: Schlauch iØ 9 mm, Luftverbrauch: ca. 250 l/min. 02-1 Venturidüsen mit Energiesparfunktion für obigen Heber Deutliche Druckluftersparnis, da die Düsen abschalten, wenn das Vakuum erreicht ist, und nur nachsaugen, wenn das Vakuum abfällt Entladung – Lamiline/Handling QC4: Pos. 03: Leichtlauf-Überkran, Typ A 250/190S 26 x 8 m 2 Längsschienen à 26 m, ca. 1 m Kabelfahrweg und eine manuell verfahrbare Doppelbrücke à 8 m, inkl. 12 Stahlstützen mit Aufhängepunkten sowie sämtlichen Verbindungen, Laufwagen, Kabelwagen und Luftschläuchen. 03-1 Reibradantrieb für Brückenfahrt inkl. Ausrückvorrichtung 2 elektrische Reibradantriebe für die Brückenfahrt, Fahrgeschwindigkeit 5/20 m/min. Inkl. Steuerungsintegration in das Bedienpanel des Leichtlaufhebers 03-2 Reibradantrieb für Wagenfahrt inkl. Ausrückvorrichtung 1 elektrischer Reibradantrieb für Wagenfahrt, Fahrgeschwindigkeit 5/20 m/min. Inkl. Steuerungsintegration in das Bedienpanel des Leichtlaufhebers 04 Leichtlaufheber inkl. pneumatischer Kipp- und Drehfunktion, Typ LKD 500 S 70 Tragfähigkeit 500 kg, das Heben und Senken erfolgt über einen in das Hubrohr integrierten Pneumatikzylinder, der stufenlos vom Bediener geregelt werden kann. Der Heber kann mittels Vorrichtung im Hubrohr sehr leicht manuell um 360° gedreht werden. Der Saugrahmen kippt pneumatisch von 0 - 90° und rotiert ebenfalls pneumatisch von 0 - 180°. Die Kippbewegung von 90-80° ist separat schaltbar, um das Kippen langsamer/sanfter zu steuern. Am Saugrahmen befinden sich 7 runde Saugteller, Ø ca. 290 mm, davon sind 4 ausziehbar. Die 3 mittleren Sauger sind verstellbar. Eigengewicht: ca. 230 kg Erforderlicher Luftdruck: 7 bar, 1/2" Druckluftanschluss: Schlauch iØ 13 mm, Luftverbrauch: ca. 40 l/min.

Stanje: rabljeno, Leto izdelave: 1996, Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has a capacity of 29,000 bottles per hour. The machine has undergone several upgrades, including the installation of an S7 control system, lye filtration with drum screen, and pH value monitoring for hot water circuit 1. The machine will remain in operation until the end of January 2026 and can be inspected in person at any time until then. Technical Details - Capacity: 29,000 bottles/hour - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Equipment & Upgrades - Plastic bottle cell with 110-pitch spacing - Suitable for swing-top bottles - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Tjdpevxtavofx Abgjf Upgrades: - Retrofit S7 control system - Drum screen for lye filtration - Guardrails on the machine - Swing-top specific lye spraying at the return section Cleaning & Heating System: - Rotating spray systems - Heating via shell and tube heat exchanger and hot water - Lye concentration measurement and dosing control, including post-lye - pH value measurement for hot water circuit 1 Soaking & Rinsing System: - Double pre-soak with sieve belt - Lye volume: 30 m³ - Post-lye, hot water 1, hot water 2, cold water and fresh water rinses - Head section can be damped and cleaned with disinfectant - H₂ extraction system

Stanje: rabljeno, Leto izdelave: 2007, Overview The bottle cleaning machine was previously used in a brewery in Germany. Due to regular and thorough maintenance, the machine is in excellent condition. All tanks and the machine body are made of stainless steel. The machine remains installed and operational. It is being replaced to accommodate a higher line speed, though it is still in very good working order. Technical Data: - Rated output: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) - Total number of bottle pockets: 3,240 units - Pockets per basket row: 18 units - Pocket pitch: 110 mm - Chain pitch: 169 mm Treatment Times: - Total treatment time: 14.95 minutes - Total immersion time: 7.56 minutes - Caustic immersion time: 6.73 minutes - Caustic filling time: 7.73 minutes - Caustic contact time: 7.89 minutes - Total internal jetting time: 70 seconds - Total external spraying time: 25 seconds Dimensions: - Housing (L x W x H): 8,530 x 2,300 x 2,990 mm - Overall dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm - CE certified - Including chemical dosing pumps - Machine data sheet included - Rotary tube spray system - Single-end machine - Label discharge at back left - Label press included Tjdpfx Aoxbr Sljbgof - Bottle inflow and outflow fingers - Bottle pockets made of plastic - Entire machine body made of stainless steel - Steam extraction

Stanje: rabljeno, Leto izdelave: 1999, Overview The bottle cleaning machine was previously used in a brewery. Due to a complete overhaul in 2005 and ongoing maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, making it easy to load and transport. Technical data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Dimensions and weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg - Fully equipped and operational: 7,790 x 3,450 x 2,950 mm / 20,000 kg Year of manufacture: 1999 Bottle formats: 0.33 l, 0.5 l Machine details / Features: - Steam-heated - Pre-cleaning and removal of residual liquids via pulsed rinsing before washing - CE certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles Tjdpowg E D Iefx Abgsf - Infeed/discharge at one end - Label discharge rear right - Finger removal/loading - Bottle cells made of plastic - Concentration measurement of NaOH reserve solution - Spindles made of stainless steel - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam exhaust - Machine dismantled, ready for shipment - Automated machine start (heating etc.)