Kovalno kladivo

REITER KO

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Dusdpfxjfxyhfo Ad Asp Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Dusdpfx Adsvzhf Se Aep Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Leto izdelave: 2025, stanje: rabljeno, New: Yes Color: Grey Load compartment capacity: 10,000 l Dujdpowvmkzjfx Ad Asp

Stanje: rabljeno, TECHNICAL DATA - Max. gear hobbing module: 1.5 [mm] Duodpjuhbplefx Ad Aep - Max. gear hobbing diameter: 70 [mm] - Max. gear hobbing length: 100 [mm] - Max. workpiece length: 200 [mm] - Min. number of teeth for gear hobbing: 3 - Number of worm threads (special accessories): 1 - Helix angle: 0 – 90 [°] - Max. milling cutter diameter: 50 [mm] - 11 standard cutter speeds - Standard machine speed: 226–2100 [rpm] - Power output: 1.5 [kW] - Net weight: 1035 [kg].

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter – max. 160 mm Wheel width 355 mm Module – max. 4.5 Module – min. 0.5 Centres distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter – max. 160/175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivel 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices Dra8M7 Dsdpfx Adjvz Ec Is Ajup - Documentation

Stanje: rabljeno, Leto izdelave: 1957, Bear weight 200 kg Ram stroke 525 mm Blow rate 150 /min Blow energy 420 kJ Distance saddle bottom / lower edge of ram guide 435 mm Throat depth 425 mm Steel forging - rectangular up to 110 mm Steel forging - diameter up to 125 mm Drive power 22.0 kW Hammer weight 3.9 t Anvil block weight 3.0 t Total weight 6.9 t Space requirements (W x D x H) 1.1 x 2.3 x 2.4 m Forging hammer Duedpfxevzxpbe Ad Asp as is, without commissioning

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, PRATTO linija za varjenje mrež za 3D ograjne panele (in lahke mreže za gradbeništvo) Model Starweld POB-36-2100; Možnost izdelave mrežnih panelov in 3D/ukrivljenih mrežnih panelov; Širina mreže: 2100 mm; premer vzdolžnih in prečnih žic: 3-6 mm; razmak vzdolžnih žic najmanj: 50 mm; razmak prečnih žic najmanj: 25 mm; št. zvarov na minuto (SPM): do 140; 5 x 250 kVA transformatorji; največje število vzdolžnih žic: 42 pri razmaku 50 mm; največja dolžina panelov: 6000 mm (20'); Linija vključuje: odvijalni sistem; ravnanje in potiskanje vzdolžnih žic; zanka LAR; motorizirano ravnanje; enota za odvijanje prečnih žic; zanka za prečne žice; avtomatsko podajanje prečnih žic; varilni stroj; škarje za obrezovanje mreže; upogibna stiskalnica za mrežo; izmet in avtomatsko zlaganje/obračanje panelov; izhodni valji. Dedsudipfspfx Ad Asup

Stanje: rabljeno, Leto izdelave: 1996, x-hod 850 mm y-hod 630 mm z-hod 500 mm Krmiljenje Heidenhain Skupna potrebna moč 16 kW Djdpfsuxfz Asx Ad Aeup Potrebni prostor cca 5 x 4,2 m

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, skupna višina: 2.650 mm, skupna dolžina: 3.900 mm, skupna širina: 2.080 mm, Oprema: bočni pomik, kabina, klimatska naprava, osvetlitev, podaljšek vilic, pogon na vsa štiri kolesa, sprednja zaščita, vilice za palete, All-terrain forklift with 4x4 drive Lifting capacity: 5T Dusdpfx Aeuzivvod Aep Forklift weight: 7.2T Triplex mast Lifting height: 5m Diesel engine, 76 kW Pneumatic tires Cabin with air conditioning Fork length: 1220 mm Additionally, bucket included Additional forks, length: 2000 mm The forklift is BRAND NEW

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard Dedpfx Adewrm Dte Aoup >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.