Brusilni stroj za zobnike

Reishauer RZ 362 A

Machine is not equipped with automation or a fully automatic dressing device (these are available only on the RZ 400/410 series).

This is a stand-alone machine, yet it is fully equipped with substantial accessories. The machine is capable of grinding with extremely high precision.

Technical Data – Gear Grinding Machine Reishauer RZ 362A

Machine Type
Gear Grinding Machine
Manufacturer
Reishauer AG, Wallisellen, Switzerland
Model
RZ 362A
Year of Manufacture
1998
Machine Number
73889
Commission Number
309
CE Certification
Present

Electrical Data
Power supply 3 × 400 V, 50 Hz
Machine voltage 3 × 400 V, 50 Hz
Control voltage 1 × 230 V, 50 Hz / 1 × 24 V DC
Contactor voltage 1 × 24 V DC
Valve voltage 1 × 24 V DC
Electrical schematics standard

Grinding Wheel Data
Min./max. outside diameter 280 / 350 mm
Max. width with limitations 84 / 104 mm
Number of gears with limitations up to 3
Max. usable width with shift motion 90 mm
For module >7 or more than 3 gears, Reishauer guidelines apply

Grinding Wheel Speeds
In grinding operation 1,100 – 2,300 rpm
For profiling 50 – 95 rpm
In setup mode (special operation) max. 200 rpm

Grinding Infeed
In grinding operation per grinding stroke 0.01 – 1.0 mm
Total infeed (fx tot) 9.99 mm
In setup mode (special operation) max. 2 m/min

Grinding Stroke
Max. grinding stroke 175 mm
Automatic retraction of grinding wheel for workpiece change 65 mm

Shift Motion
Max. shift distance per 1 mm grinding stroke 0 – 1.0 mm

Workpiece Data
Min. pitch circle diameter depends on grinding wheel diameter
With grinding wheel Ø 280 mm: 50 mm
With grinding wheel Ø 320 mm: 10 mm
With grinding wheel Ø 350 mm: 10 mm
Automatic centring with sensor (only RZ 362A): 20 mm
Djdpex Sxbdefx Aflokg
Max. workpiece outside diameter
360 mm
With “Felsomat” loading system (optional, only RZ 362A) 300 mm
With automatic centring via sensor (only RZ 362A) 320 mm
Min. distance grinding wheel centre to workpiece centre
165 mm
Max. gear width
175 mm
For pitch circle diameters < approx. 150 mm, width reduction due to chuck and tailstock geometry
Max. workpiece weight
60 kg
With “Felsomat” loader (optional, only RZ 362A) 4 kg

Centres Distance
Fixed manual tailstock (optional) 645 mm
Special manual tailstock (optional) 745 mm
Hydraulic tailstock (optional, only RZ 362A) 515 mm (645 mm with reduced grinding stroke)

Toothing
Min. number of teeth 6, max. 600
Module without automatic centring min. module 0.5 (DP 48)
Module with automatic centring min. module 0.8 (DP 32)
Max. module 7.0 (DP 3.5)

Helix Angle
Min. 10°
Max. 40°
Max. helix angle left and right 45°
Shift motion limitations at large helix angles, especially over 30°

Profile and Crowning Corrections
Tip relief and crowning height
Crowning length and taper
Max. corrections depend on profiling tool and process parameters

Weights (without oil filling)
Machine approx. 5,000 kg
Control cabinet approx. 1,100 kg
Hydraulic unit approx. 600 kg
Coolant system RTO 100 (optional) approx. 1,600 kg
Coolant system RTM 100 with magnetic prefilter (optional) approx. 1,650 kg
Coolant system RTA 150 (optional) approx. 2,500 kg
"Felsomat" portal loader (optional, only RZ 362A) approx. 1,600 kg
Loading unit approx. 1,000 kg
Workpiece magazine approx. 400 kg

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.