Spotting press

REIS TUS 200 OK 400 (UVV)

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Csdpfx Ajihf R Usgqogw Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Cgedjyv In Iopfx Agqew Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details. Cedpfxexc Hh Dj Agqjgw

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) Cjdpfx Ageg Ezarjqjgw *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Cgodpfsgyy I Aex Agqsw Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 Ton RAM STROKE: 1,500 mm TABLE SIZE: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 Ton BLANKHOLDER STROKE (ram side): 200 mm FAST APPROACH SPEED: 220 mm/sec BLANKHOLDER CAPACITY: 600 Ton CUSHION STROKE (ram side): 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm FRONT OPENING (distance between uprights): 5,000 mm TOTAL WEIGHT: n.a. Cgsdsvm Eixspfx Agqew

Stanje: dober (rabljeno), Description: The machine is in good technical condition; testing is possible by prior arrangement. Maximum swing diameter: 660 mm Maximum turned diameter: 660 mm Main spindle: Cgodpsy Amqzsfx Agqjw - Speed range: 35–5000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub-spindle: - Speed range: 35–5000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power requirement: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Coolant rinsing: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant system - Tool magazine for 20 tools - B axis (positioned at 0.001°), C axis, Y axis - Secondary spindle positioning indexing - Synchronization of main and sub-spindle - Tool presetter (Tool Eye) - Front door locking - Tool magazine for 20 tools - Complete cooling system - Interface for IC memory card

Stanje: rabljeno, Pressure 160 t Cgodpeiulkqjfx Agqew Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Extendable table

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1114.3705-24, Used CNC Lathe Manufacturer: Boehringer Model: VDF 250Cm Year of manufacture: 1997 VDF Boehringer 250C The machine features the following equipment: - 1000 mm turning length - Without tailstock - Driven tools - Special swivel chuck - Siemens 840C control The Boehringer VDF 250 Cm is a CNC lathe designed for chuck workpieces. It is distinguished by its robust construction and high-precision machining capabilities. Technical Data (Model Year 1997) Working Area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Maximum turning length: 1,000 mm (No) Tailstock: Tool Turret: - Number of stations: 12 - Tool holder: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose size: 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW Codpewlap Ajfx Agqegw - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Feeds: - Automatic feed rates: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axes) - Max. feed force: 15 kN Dimensions and Weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swiveling control panel - Hydraulic system by HYDROKRAFT - Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, right-side discharge - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature controller by RITTAL Control: SIEMENS SINUMERIK 840 C Variants and Differences There are various versions of the VDF 250 series, such as the VDF 250 CU, which may be equipped with different controls (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are pure chuck machines designed without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe known for its stability and precision. Its robust design and comprehensive features make it ideal for machining chuck parts in various production environments.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Leto: 1995 Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Cjdpfx Agon Awd Roqjgw Vgradna višina: Maks. 1.400 mm