Transportni trak z izmetom

Reinhardt ATS

Stanje: delavnici obnovljeno (rabljeno), Dolžina delovne površine: 3600 mm Širina delovne površine: 1140 mm Višina delovne površine: 820 do 1050 mm Sistem za povratno transportiranje WEINIG RF15 ----- Uporablja se za stroje za žaganje, hoblovanje in rezanje z največjo hitrostjo podajanja približno 22 m/min. Iodpfx Aexpn Tnsquebc Za neprekinjeno povratno transportiranje obdelovancev do operaterja. Po hoblovnem stroju obdelovanci preidejo na valjčni transportni sistem, se transportirajo v prečni smeri in prevzamejo na pogonjen valjčni transportni sistem. Ta usmerja obdelovance na naslednji vzdolžni valjčni transportni sistem nazaj do operaterja in hkrati služi kot medpomnilnik za obdelovance. Tehnični opis proizvajalca: Dolžina obdelovanca: 250 - 3.600 mm Širina obdelovanca: 30 - 230 mm Minimalna debelina obdelovanca: 10 mm Maksimalna hitrost podajanja hoblovnega stroja: 22 m/min Prečni transportni sistem z 2 integriranima valjčnima transportnima sistemoma: Dolžina prečnega transportnega sistema: 1.140 mm Konstantna hitrost transporta: 30 m/min Maksimalni takt na minuto: 40 Dolžina valjčnega transportnega sistema: 2.200 mm Konstantna hitrost: 30 / 60 m/min Pogonski motor: 1 kW (1,3 KM) Delovna napetost: 220/380 Volt, 50 Hz Priključek za stisnjen zrak: 6 bar Vzdolžni valjčni transportni sistem (nepogonjen): Dolžina: 1.700 mm Širina: 160 mm Namestitev z možnostjo nagiba, naklon nastavljiv Posebna oprema: Podaljšek vzdolžnega valjčnega transportnega sistema (nepogonjen) za 3.000 mm ----- Cena navedenega stroja na zahtevo! ----- (tehnični podatki po navedbah proizvajalca - brez jamstva!)

Stanje: rabljeno, Premer kolutne žage za hlode 70 Ibjdpfxsft Huys Aquoc

Stanje: rabljeno, Clamping trolley Weiss with auxiliary carriage with rails fully hydraulic track gauge: 90 cm Ibsdpfohwzrksx Aqujc immediately available Location: Austria, near St. Pölten

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 62 mm, skupna širina: 160 mm, skupna višina: 150 mm, skupna dolžina: 3.000 mm, razmak osovin: 33 mm, Težki dvojni valjčni tirnice, 6 kosov Valjčne letve Isdpfxjrby Ilj Aquebc Dolžina posamezne tirnice: 3 m Tirnice je možno poljubno opremiti z valjčki.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support Ibjdjmkixwepfx Aqujc - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, Vesto žaga z dvema diskoma naprodaj - električni motor: 2 x 7,5 kW, - kompletno s hidropostajo, Ibedpfx Aqstqt T Ijuec - električna omara.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), - Največji lesni prečni prerez: 300 x 2600 mm - Krožno žagino rezilo D 900 mm Ijdscbq Nwjpfx Aqusbc - Motor krožne žage: 18,5 kW - Hitrost: 1450 o/min - Zelo robustna in stabilna konstrukcija BSP / CLT IZRAČUN – Ocena vrednosti za primerjavo 8.000 € nov ploščat motor 18,5 kW s prirobnico 4.300 € nov pozicionirni pogonski motor 1.700 € novo krožno žagino rezilo AKE D 900 mm, Z 120 minus 10 % 8.500 € nova električna omara za upravljanje _____ 22.500 € brez jeklene konstrukcije in brez montaže - Posebna žaga je bila po obnovi uporabljena le približno 5 ur >> 100 % Izdelano v ZR Nemčiji s 6-mesečno garancijo

Stanje: zelo dobro (rabljeno), Overall dimensions length: 4900 mm width: 1600 mm height: 1950 mm infeed table height: 860 mm Weight: 1200 kg Workpiece dimensions maximum diameter: up to 400 mm length: from 500 to 3000 mm Prism output dimensions: from 55 mm Ijdougp Imspfx Aquebc Main motor power: 2 x 5.5 kW Power supply: 400 V (3-phase) Head adjustment: electric Infeed feed continuously variable by frequency inverter feed speed: 4–9 m/min Pulley diameter: 600 mm Bandsaw blade parameters length: 4000 mm width: 30–42 mm thickness: up to 1.1 mm

Stanje: dober (rabljeno), Longitudinal circular saw with max. 3 m cutting length max. cutting width 0.5 m max. cutting height 100 mm Isdpfxswumwfe Aquobc Motor 12 kW total length 5.8 m total width 1.55 m

Stanje: rabljeno, Pneumatic tilting roller table 1500x2000x900 mm Pneumatically tiltable roller table, with stand. Dimensions: 1500 x 2000 x 900 mm Iodpfeuglrzox Aquebc Height of the table when raised: 1850 mm