Sistem oljnega filtra

Reichert Magnetfilter

Leto izdelave: 2002, Stanje: dober (rabljeno), AXES TRAVEL X AXIS (longitudinal) (mm): 7,700 Y AXIS (transversal) (mm): 470 Z AXIS (vertical) (mm): 420 A AXIS (spindle rotation): 0° ÷ 180° ELECTROSPINDLE Maximum power in S1 (kW): 8 Maximum speed (rpm): 24,000 Tool holder taper: HSK - 63F Automatic tool clamping: ● Cooling with heat exchanger: ● ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine: 8 Maximum number of angular heads insertable in the tool magazine: 2 Maximum saw blade diameter storable in the magazine (mm): Ø = 180 FUNCTIONALITY Multi-piece operation: ● Dynamic pendulum operation: ● Knedpfx Aorupldjdbjd WORKABLE FACES With direct tool (top face, side faces): 3 With angular unit (side faces, end faces): 2 + 2 With saw blade tool (top face, side faces, end faces): 1 + 2 + 2 TAPPING CAPACITY With compensator: M8 Rigid (optional): M10 WORKPIECE CLAMPING Standard number of clamps: 8 Maximum number of clamps: 12 Independent motorized clamps: ● Maximum number of clamps per zone: 6

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Knedpod Nl E Uefx Adbjd Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Ksdogbfaxjpfx Adbond Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m Knjdpfx Adsb U Hwpebod - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm Knjdpfx Adjb U Hwtjbed T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: pripravljen za uporabo (rabljen), Tehnične specifikacije PREMIKI OSI X OS (vzdolžna) (mm): 4300 Y OS (prečna) (mm): 270 Z OS (vertikalna) (mm): 300 ELEKTROVRETENO Največja nazivna moč (S1) (kW): 5,5 Največja moč Največja hitrost (vrt/min): 20000 Orodni nosilec: HSK 63F AVTOMATSKI MENJALNIK ORODIJ Največje število orodij v magazinu: 4 (standardno) Največje število kotnih glave, ki jih je možno naložiti v orodni magazin: 2 Največji premer žaginega lista, ki ga je možno naložiti v orodni magazin (mm): Ø 180 FUNKCIJE Večkosovna obdelava Kodsundg Uepfx Adbend OBDELOVALNE POVRŠINE Z ravnim orodjem (zgornja površina): 1 S kotno glavo (bočne površine in konci): 2 + 2 Z žaginim orodjem (bočne površine in konci): 2 + 2 NAVOJENJE (z navojnim utorom za aluminij in skozi izvrtino) S kompenzacijskim vpenjalom: M8 Rigidno VPENJANJE OBDELOVANCEV Standardno število primežev: 4 Največje število primežev: 6 Električna napeljava in motorji Priklop: Trifazni Skupne dimenzije Dolžina: 5000 mm Širina: 1300 mm Teža: 2000 kg

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system Knodpfx Adsb U Hwnebsd - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: dober (rabljeno), Leto izdelave: 2007, Used lathe by OKUMA - Model: LT200-M TwinStar - Year of manufacture: 2007 - Including loading robot and loading carousel - Including chip conveyor - Coolant tank Knedpfxev S Svvs Adbsd - Immediately available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Seriennr.: 4046, Oprema: dokumentacija / priročnik, Strand casting conveyor 600 Knsdpfju S N Ahsx Adbjd Zinc melting furnace ZSO 600 / 700 B

Stanje: rabljeno, Mitre crosscut saw for aluminium (special-purpose machine construction with 4 servo motors) Circular saw, mitre saw, longitudinal cutting saw Year of manufacture: 2002 Saw blade diameter: 500 mm Cutting capacity at 90° Round: Ø 180 mm Rectangular: 350 x 140 mm (via longitudinal cut) Cutting capacity at 45° Round: Ø 180 mm Rectangular: 350 x 100 mm (via longitudinal cut) Guide rail length (base frame): 1100 mm Travel on base frame (forward-backward): 650 mm Travel on column (up-down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Controlled longitudinal cutting motion - Controlled saw blade height adjustment - Controlled mitre cut via swivelling saw aggregate - Controlled mitre cut via tilting saw aggregate - Swivelling and tilting of the saw via INDRAMAT servo motors with precision gearbox (Motors: MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Vertical axis movement via INDRAMAT servo motors and ball screw spindles (Motor: MKDO41B-144-KP1-KN) - A total of 4 Indramat servo motors installed - Very high-quality German machine construction Knjdpjdzp T Defx Adbsd Space requirement (L x W x H): 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition The unit comes from a special-purpose machine for specific products. All other components and electrical parts necessary for building a new special-purpose machine are also available.