Dvižne mize

Rehnen Typ HTM mittel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Bcodpsph Uk Nsfx Ag Tow Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: novo, Leto izdelave: 2024, This is a CNC milling machine equipped with 4 spindles that can operate simultaneously and perform automatic tool changes. This increases production efficiency and makes the process up to four times faster. This CNC milling machine is ideal for large-scale production of façades, doors, windows, skirting boards, and more. Thanks to the planetary gearbox of the Wattsan M1 1325, you can effortlessly mill hardwoods and soft metals. Additionally, a vacuum table can be installed to ensure rock-solid workpiece fixation. With a Wattsan milling machine, you can process metal, hardwood, plastic, foam, aluminium, and plexiglass. Contact our sales managers for more details! Technical specifications of the Wattsan M1 1325 S4: Working area: 1300 x 2500 mm Spindle power: 6 kW Machine dimensions: 2000 x 3040 x 1780 mm Machine weight: 1000 kg Virmer not only provides first-class machinery but also offers service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Additionally, all Wattsan equipment owners benefit from lifetime online support. Bcsdpfx Aer D Ntfeg Tow Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. In addition to laser engravers, we supply metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops its products with the help of customer feedback. As a result, Wattsan has implemented more than 50 updates, making the machines more reliable, precise, and efficient—helping you take your business to the next level. PLEASE FEEL FREE TO CALL OR WRITE TO US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK. If you are looking for the right laser or CNC milling machine, we are happy to assist. Discover our wide range of machines and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fibre metal lasers; fibre metal laser engraving machines; CNC milling machines for metal; woodworking milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; metal laser cutting systems; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; air compressors; rotary devices; mirrors for laser machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Vitoplex 300 Heating Boiler 130kW Used Year of manufacture: 2001 Model: TX3 Output: 130kW Viewing by appointment only—please call in advance! Preferred sale to dealers, commercial buyers, or for export. All information given without guarantee; subject to errors and prior sale. The seller accepts no liability for typographical or data transmission errors. Bodpfx Agjtu Txhe Tocw Of course, we can also handle all formalities for you. Loading possible Request more information

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Leto izdelave: 2003 Bsdotr A Evspfx Ag Tecw Napetost: 400 V Frekvenca: 50 Hz Teža: 3200 kg Število osi: 3

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 0,004 kW (0,01 KM), največja višina reza: 250 mm, največja širina rezanja: 450 mm, premer žaginega lista: 400 mm, skupna masa: 7.500 kg, Double Arbor Multi-Blade Saw 2x110 kW TOS SVITAVY PWR 422 – Czech production – double arbor – full technical documentation (DTR) TECHNICAL DATA: – Maximum cutting height: 250 mm – Track width: 450 mm – Arbor width: 450 mm – Blade bore diameter: 80 mm – Arbor diameter: 60 mm – Minimum blade diameter: 300 mm – Maximum blade diameter: 400 mm – Maximum input material width: 860 mm – Minimum processed material length: 1500 mm * From above: – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Kickback devices: yes – Pneumatically pressed metal feed roller: yes – Pressure unit: yes – Saw arbor: yes – Pressure unit: yes – Two pneumatically pressed metal feed rollers: yes * From below: – Metal idle roller: yes – Guide: yes – Kickback devices: yes – Track: yes – Saw arbor: yes Bcodpfsri Nvvjx Ag Tow – Track: yes – Infinitely variable feed speed with inverter: 4–40 m/min – Main motors: 2x110 kW – Feed motor: approx. 3 kW – Electric elevation of the frame (up/down): 0.55 kW – Electric adjustment of saw arbors: 2x0.18 kW – Central lubrication system – Extraction port diameter: 2x300 mm – Dimensions (LxWxH): 3400x2650x2200 mm – Approximate weight: 7500 kg

Stanje: novo, Leto izdelave: 2025, New optimization saw SALVACUT 5000 from SALVAMAC Innovative high-speed optimizing saw with optimization and removal of wood defects, featuring dual drive with upper rollers and a lower feed belt with independent control. Bcedpfsn E Sl Rex Ag Tjw Based on an idea by Salvador Christian.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 4.970 mm, pomik osi Y: 2.120 mm, pomik po osi Z: 250 mm, število mest v zalogovniku orodij: 24, hitrost pomika os X: 60 m/min, hitrost podajanja osi Y: 60 m/min, hitrost podajanja os Z: 30 m/min, moč vretenovega motorja: 12.000 W, montažni premer: 350 mm, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, največja hitrost vretena: 20.000 obr/min, hitrost vretena (min.): 600 obr/min, teža orodja: 8 g, Oprema: dokumentacija / priročnik, Komplett maskin med Coral filtersystem og SCM-løfter til salgs. Utstyret har svært lite bruk. CNC-bearbeidingssenter med mobil portalkonstruksjon og fast arbeidsbord for bearbeiding av heltre og ulike materialtyper: limtre, kryssfiner, sponplater, MDF, aluminium m.m. Maskinen er designet med avanserte 3D-solid-modelleringsteknikker. Konstruksjonen består av en maskinramme og en mobil portal i elektro-sveiset stål. Bearbeiding av rammens komponenter skjer på høykvalitets CNC-maskineringssentre, med kun én oppspenning for å sikre optimal planhet, vinkelretthet og presise toleranser. Styringen er en numerisk kontroll med grensesnitt til en industriell PC. CNC-løsningen med PC kombinerer alle egenskapene til numeriske styringer med brukervennligheten til en personlig datamaskin. PC-en gjør det mulig å benytte operatørgrensesnittet Maestro cnc, utviklet av SCM for raskt og enkelt maskinprogrammering, selv for mindre erfarne operatører. Tekniske spesifikasjoner: - Borede og gjengete hull med 120x120 mm avstand for vakuumtilkobling av jigger og utstyr - Sporfelt med 40 mm avstand for sugekopper eller gummipakninger - 2 arbeidsområder - Maksimal bearbeidingslengde i Y-retning = 2170 mm TELESOLVE fjernservice via internett Mobil konsoll med "eye-M PRO" integrert PC TECPAD – fjernstyring av maskin Mobil konsoll med 7” farge touch-skjerm for styring og administrasjon. PRISMA KT Bearbeidingshode Bearbeidingshodet med 5 interpolerte akser er montert direkte på den bevegelige portalen og sikrer maksimal stivhet under fresing, med topp overflatekvalitet selv ved kraftig materialavvirkning. Tekniske spesifikasjoner: - Fresenhet med 5 interpolerte akser - Elektromotor/spindel med HSK 63F hurtigvekslings system - Turtall 600–20 000 rpm - Høyre- og venstreløp - Maks ytelse (S1/S6): 11/12 kW (15/16,5 HK) fra 9000 rpm - Inverter - C-akse rotasjon: 640° - B-akse rotasjon: 270° - C-akse med TTS låsesystem (Total Torque System – SCM-patent) - Vedlikeholdsfri fett-smøring - Væskekjøling med varmeveksler - Automatisk avsugshette med fire posisjoner og ON/OFF styring fra programmet To vakuumpumper 250 (300) m³/t – 50 (60) Hz Vakuumpumpe for hver halvdel av bordet. Uavhengig vakuumkrets for hver halvdel. PRO-SPACE Sikkerhetssystem – Fullstendig beskyttelse av bearbeidingshode med ejektionsgardiner og støtfangere med nød-sensorer – Nødkabel i operatørsonen – Bakre og sidebeskyttelse langs hele maskinens omkrets Bcodewd Nrdjpfx Ag Tsw Lukket kabelkjede MAESTRO ACTIVE operatørgrensesnitt (HMI) Maestro active er nytt HMI-software, felles for alle SCM-teknologier. En enkelt operatør kan tryggt betjene flere SCM-maskiner, noe som forenkler opplæring og drift. Windows 10 embedded 64 bit operativsystem Maestro cnc programmeringsprogramvare MAESTRO CNC SOFTWARE SUITE – BRUKERGRENSESNITT OG PROGRAMMERING Avansert nesting fritidsform + etikettmodul for Maestro cnc Rapid 24 – Bakenforliggende verktøymagasin Sirkulært verktøymagasin montert på den mobile portalen. Maksimal lastekapasitet: 96 kg

Stanje: rabljeno, Leto izdelave: 2001, Celaschi squaring machine, consisting of 2 single-side machines (right + left), type TA, model 20-MCI, year 2001 (CE), with 2 milling units per side, used. Workpiece dimensions: Min/max width: 60/160 mm Min/max length: 350/1400 mm Bcodpfx Ajk N I Nbog Tsw Min/max thickness: 13/23 mm

Stanje: novo, Leto izdelave: 2025, Robust cast steel/grey cast iron construction Large-dimension milling unit made of grey cast iron, tiltable up to -45° to the rear Milling speeds displayed via LEDs Fast, effortless speed change via eccentric clamping Forward and reverse rotation Height and tilt display accurate to 1/10 mm Professional-grade heavy-duty fence: with fine adjustment via rack and pinion, numerical display, aluminum fence jaws, 3-way positioning for quick repeat settings TECHNICAL DATA Dust extraction connection Extraction port diameter: 2 x 120mm Work table Table length: 2500mm Table width: 655mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Motor power: 5.0kW Spindle Spindle tilting: 0 – -45° Usable spindle length: 125mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle shaft diameter: 30mm Maximum cutter diameter Max. tool diameter: 240mm Max. retractable tool diameter: 230mm Max. profile milling tool diameter: 210 – 240mm Max. tenoning cutter diameter: 320mm Bodpeiidnfsfx Ag Tscw SCOPE OF DELIVERY Aluminum milling fence jaws Curved workpiece safety guard Motorized height-adjustable and tilting spindle Digital display of set values Speed display at the front of the machine via LED Extension table left and right Location: In stock 54634 Bitburg - immediately available -

Stanje: novo, Spindeldurchmesser: 90 mm Sägeblattdurchmesser: 255 mm Schnittbreite: 1600 mm Schnitthöhe: 0–50 mm Motorleistung: 37 kW Bcsdpod Nluwofx Ag Tow Drehzahl: 2800 U/min Vorschubgeschwindigkeit: 0–15 m/min Vorschubmotor: 3 kW Lieferzeit: ca. 3 Monate.