Temperirna naprava Regloplas P160

Regloplas P160/9/SG51/1K/RT45

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Ledpelz Rvlofx Af Soag Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Laedpfeftm Hrex Af Sog Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), številka stroja/vozila: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar trunking system available! Total stock: 75 running meters! Type KSA 250A / 250 Ampere - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Busbar lengths mainly 5m, also available in 1.5m and 3m Price per meter incl. connectors, end pieces, and mounting brackets Feeder and tap-off boxes 16-32-63A available as options (Other tap-off boxes 125 - 250A available upon request) Dismantling performed by a certified electrician. Busbars are in excellent condition! Please inquire about your required lengths or accessories! Stock item, immediately available! ----- Old Kloeckner Moeller BD1 system still available! Busbars, elbow elements, feeders, and tap-off boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock! Lsdpfopgmryex Af Seag Please inquire! Are you also looking for a crane system?

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Ledpfxeh Hbpwo Af Soag Model: TT-157E Available: 14 units

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 50 obr/min, For sale is a machining center from Deckel Maho, model DMU 50 M, with path control and manual rotary axes. The machine is in very good condition, fully functional, and ready for immediate use. A special feature is the ability to operate in an open enclosure. Technical specifications: Lasdpfx Afeu Unh Ij Seg Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360° (mechanical) Swivel range: +90/ -15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available upon request. Transport and loading can be organized across Europe for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Lodpjdmn E Hofx Af Seag

Stanje: rabljeno, Hladilna enota, povratni vodni hladilnik, vodni hladilnik, chiller O. Hellwig Leto izdelave: cca 1995 Hladilna zmogljivost: cca 8 kW Nazivna moč hladilne enote: 3 kW Hladilno sredstvo: R422D Prostornina vodnega rezervoarja: cca 35 litrov Pretok obtočne črpalke: 40 litrov/min Laedpspu R Ncjfx Af Ssg Moč črpalke: 0,63 kW Vodna priključka: 1/2 palca Priključek na omrežje: 380 voltov, 50 Hz - Nastavitev temperature preko vrtljivega potenciometra Dimenzije (D x Š x V): 1100 x 750 x 140 mm Teža: 285 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: Lodpfok Rnq Nsx Af Sjag - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 5.743 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-position tool changer. The working area is 600 x 450 x 450 mm and supports a maximum workpiece weight of 500 kg. It is ideal for precision machining of metals and alloys, offering a rigid construction and efficient cooling. Consider the opportunity to purchase this MIKRON VCP 600 vertical machining center. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm • Maximum workpiece weight: 500 kg • Spindle run time: 5,743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • HSK 63 tool holding system • Key features: • Versatile: precise machining of a wide variety of materials • High-performance spindle for fast, precision machining • Sturdy, rigid construction for high accuracy even with heavy workpieces • Automation-ready: integrated functions for automated tool and workpiece change • Efficient cooling system for optimized performance and tool life • Applications: Ideal for tool and mold making as well as the production of high-precision components in various industries Additional equipment • m&h 3D probe Ledpfx Afex Imtyj Sjag • Vice: not included

Stanje: rabljeno, Leto izdelave: 2010, številka stroja/vozila: AT91, Used CIP Tetra Pak Year 2010 15T/h The used CIP Tetra Pak, year of manufacture 2010, with a capacity of 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing facilities. As such, this system ensures an effective hygiene cycle without requiring dismantling of the production line, thereby optimizing downtime and reducing both water and cleaning agent consumption. Tetra Pak built the used CIP system in 2010 with a throughput of 15 tons per hour. Its operational capacity of 15 tons per hour makes it suitable for highly productive plants while ensuring hygiene standards compliant with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak 2010 15T/h The Tetra Alcip 1 applies a controlled wash cycle to remove organic and inorganic residues from production circuits. The system includes separate tanks for water, alkaline cleaner, and acid, and automatically regulates temperature, chemical concentration, and wash time according to the requirements of the facility. This enhances the efficiency of cleaning operations. Moreover, the used CIP Tetra Pak 2010 15T/h automates the cleaning process, reduces the risk of cross-contamination, and improves production efficiency. The system also allows operators to configure various wash parameters, enabling adaptation to specific production requirements and ensuring thorough cleaning of filling lines, pipelines, and heat exchangers. Lasdpfx Afowga Iue Sjg Safety and Process Control The system features advanced safety functions, such as: - Sensors for continuous monitoring of cleaning agent concentrations. - Temperature and pressure controls throughout the cleaning cycle to ensure optimal performance. - Alarm systems that detect and manage process anomalies, thus preventing potential failures. These features ensure the reliable operation of this used CIP system, minimize operational errors, and optimize the consumption of water and chemicals. Automated system monitoring also increases safety while reducing maintenance requirements. Operational Advantages Using this used CIP Tetra Pak enhances plant productivity in several ways. Firstly, it reduces downtime: the continuous wash system completes fast cleaning cycles without needing to dismantle components. Additionally, it optimizes resource use: the automatic detergent dosing system prevents chemical wastage. Furthermore, it ensures regulatory compliance: the system meets high hygiene standards and fulfills industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. As a result, companies benefit from improved production continuity and lower operating costs. Likewise, the option to configure cleaning...