Stružnica za izrezovanje/RAUSCH RS 6-1300

RAUSCH RS6/1300

Stanje: rabljeno, Leto izdelave: 2019, Širina utora 3-100 mm Guedpfjy Tigtsx Aa Uec Dolžina vlečenja 750 mm Delovna hitrost 0-20 m/min Premer izvrtine 10-500 mm Hitrost rezanja 0-20 m/min Hitrost povratka 0-50 m/min Nosilnost 35.000 kg Priključna moč 12,27 kW Sila rezanja 40.000 N Namizje stroja 500 x 770 mm Teža stroja cca 2,1 t Oprema / dodatki: Leto izdelave original 1986 Leta 2019 obnovljen in opremljen z novo krmilno enoto - Delična glava - Veliko dodatkov (utoralni noži, orodja, razno) - Dokumentacija

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Gjdpfx Aaow Ighij Usuc Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: rabljeno, Širina utora: 3-28 mm Dolžina orodja: max. 1200 mm Delovna hitrost: 3 m/min + 6 m/min Vlečna sila: 60 kN pri 3 m/min Vlečna sila: 40 kN pri 6 m/min Hod: 1050 mm Gusdpfoyz Dgdsx Aa Usc Teža stroja: ca. 600 kg Vključuje veliko zalogo povlečnih igel

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 370 kg, moč: 3,5 kW (4,76 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 800 mm, hitrost vlečenja: 3 m/min, skupna dolžina: 920 mm, skupna širina: 800 mm, skupna višina: 1.950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370 kg Overhauled: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 Guodpfxeytvyxj Aa Uoc General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch Pulling force: 3,000 kg (30 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 3 m/min Maximum stroke: 800 mm Maximum tool length: 1,000 mm Table size / Working area: 340 mm x 220 mm / 430 mm x 310 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited (without splash protection cabin) Dimensions (h x w x d): 1,950 mm x 820 mm x 900 mm (h = table height to floor without attachments) Motor: 3.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and timing belt drive - 2 broaching speeds: 3 m/min & 6 m/min - External stroke adjustment, cross-machine reproducible tool length setting system - Integrated coolant system with check valve and drain tap, as well as selector switch for automatic operation (not automatically switching in tilting operation) - Patented coolant/lubricant swing system - 3-sided enclosed splash guard cabin, open at front (without external control panel) - Machine cladding below safety door with chip protection and tool storage area - Routing of electrical wiring in steel protective conduits - Electrical monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Safety door with integrated emergency stop function - Operating panel made of stainless steel with permanent marking - 4 central lubrication points for trapezoidal spindle drive - Machine documentation Comments: The machine is completely overhauled; the machine body is fully reconditioned. The following wear parts were replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals renewed - Central drive shaft is new - Coolant system (pump, check valve, and drain tap) incl. coolant/lubricant swing system is new - The clamping jaws are new (pull bridge additionally reinforced) - Switchable clamping jaw monitoring system installed (extra safety for operator & tool breakage) - A safety door with safety interlock installed instead of rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with permanent marking - New SEW gear drive motor with timing belt drive - Machine newly painted with 2-component structural lacquer The machine is available in our warehouse and can be inspected under power.