Samodejna izsekavanje stroj

RASTER

Stanje: rabljeno, Leto izdelave: 1997, Presskraft: 315 t Stößelhub verstellbar: 30 - 100 mm Stößelverstellung: 100 mm Einbauhöhe (Hub unten, Verstellung oben): 370 mm Tischaufspannfläche ca.: 1600 x 1100 mm Stößelaufspannfläche ca.: 1600 x 1100 mm Durchfallöffnung im Tisch: 600 x 180 mm Hubanzahl pro Minute: 15 - 180 min-1 Tischhöhe über Flur: 1200 mm Leistungsbedarf: 170 kW Höhe über Flur ca. : 4900 mm Abmessungen LxBxH: 4900 x 1900 x 4900 mm Maschinengewicht ca.: 55 t Standardausstattung Die Presse wurde im Jahr 2015 nach CE - Standard umgebaut. Die Presse wurde 2021 auf eine SIEMENS S7-TIA Steuerung Bandanlage hat noch eine SIEMENS S5 Steuerung. Zusatzausstattung Hubleisten im Pressentisch Automatisierung Bcsdpfx Aeuqd Tmsg Tjw Bandanlage KEMMERICH bestehend aus:Abwickelhaspel: Tragkraft: 5t Richtmaschine:Walzendurchmesser: 70 mmBandbreite: 300 mmWalzenvorschub:Walzendurchmesser: 160 mmVorschublänge: 0,1 - 9.999,9 mmBandbreite: 30 - 350 mmMaterialdicke: 0,2 - 10 mmMaterialquerschnitt: 1.500 mm2Vorschubgenauigkeit: +/- 0,05 mmLadestuhl

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Bsdjcxxycspfx Ag Tjcw Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left

Stanje: pripravljen za uporabo (rabljen), A complete punching line with a grid punching press is available. 1) Decoiler Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000 kg. 2) Straightening machine, max. material width: 300 mm, max. material thickness: 2 mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5 m/min, max. material width: 300 mm, max. material thickness: 4 mm, transport rollers: 2. 4) Grid punching press HR 50/600 NL, strokes per minute: 300, stroke: 30 mm – 80 mm. An on-site inspection is possible. Bjdpfxow Az R As Ag Tscw

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), A complete punching line with a grid punch is available. 1) Double decoiler, load capacity: 1000 kg. 2) Straightening machine Alba GGVHY 200, year of manufacture: 1992, feed rate: 6.5 m/min, max. material width: 200 mm, max. material thickness: 4 mm, transport rollers: 2. 3) Feeder Alba MA RIA 7, year of manufacture: 1978, max. material width: 300 mm, max. material thickness: 3 mm, feed speed: 40 m/min, control: Siemens S7 with OP7. 4) Grid punch HR 80/700 NL, year of manufacture: 1992, press force: 80 t, strokes per minute: 250, table dimensions X/Y: 730 mm/750 mm, ram dimensions X/Y: 730 mm/630 mm, ram stroke: 40 mm, ram adjustment: 80 mm. 5) Roll forming line CIS. Documentation available. An on-site inspection is possible. Bcedpfjw Az Rvsx Ag Tew

Stanje: pripravljen za uporabo (rabljen), A Honsel bag making machine (converting machine) is available. Working width: 500 mm, roll closure: one-sided. Includes cardboard flange feeder, creasing table, and delivery table with counter and feeder. On-site inspection possible. Bodpfx Agjvtqrfe Tecw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 150 mm, dolžina mize: 2.000 mm, širina mize: 1.200 mm, stiskalna sila: 250 t, nastavitev hoda: 40.200 mm, skupna masa: 55.000 kg, Certificirano po DGUV do: 09/2026, Raster stroj za izsekavanje in preoblikovanje RSU 2500 - 2000 P Desch kompaktni pogon Elektronski sistem za merjenje sile stiskanja Hidravlični zaščitni sistem proti preobremenitvi 3-delna konstrukcija iz litega železa z nateznimi vijaki Nosilec orodja Bodpfx Aexcbbreg Tocw Miza in vpenjalo batnice Raster VWA hidravlični podajalnik z valji, širina traku 500, z valjčno prevleko Topochrom Površina bata 1000 x 2000 Število hodov 20 - 150 1/min Nastavitev hoda 40 - 200 mm Na željo z linijo za dovajanje traku Kohler 20030.400/9-2000.2H

Stanje: dober (rabljeno), Leto izdelave: 2012, Leto izdelave: 1979, vendar je bil stroj leta 2012 popolnoma generalno obnovljen po najnovejših UVV standardih Vgradna višina: 800 mm Bcedoydlx Sjpfx Ag Tew Hod batnice: 500 mm Izsev: 360 mm Nazivna sila: 400 kN Hidravlični tlak: 160 bar Obratovalne ure: 1356 Ostalo: nova krmilna enota Pilz, električne sheme so na voljo Video o funkcionalnosti je na voljo

Leto izdelave: 2009, Stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Bsdoqiz N Rspfx Ag Tjcw Lifting height: 9 meters

Stanje: dober (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 25 t, potrebna višina: 2.800 mm, zahteva za prostor dolžina: 1.600 mm, potrebna širina: 2.200 mm, Four-Column Punching Press Manufacturer: Hermann Raster KG Model: HR SL4S Working Area Distance from ram center or clearance between upright columns under the guide: 160 mm Minimum/maximum distance from clamping table to ram at maximum stroke: 260 / 300 mm Minimum/maximum distance from clamping table to ram guide: 110 / 150 mm Clamping Table Clamping surface: 600 x 320 mm Ram Minimum/maximum stroke: 0 / 40 mm Ejector travel (max. 20 mm) Strokes per minute: 200–1000 Ram adjustment: 70 mm Clamping area: 400 x 250 mm Clamping pin: bore diameter 40 mm; depth 70 mm Safety Equipment Electro-pneumatic clutch and spring-loaded brake Performance Nominal pressure: 25,000 kp Bcedpfxjwcxccs Ag Tsw Cutting capacity: 625 mm², K=40 kg/mm² Space Requirement without Soundproof Enclosure 1 m x 1 m x 2.45 m Weight without Soundproof Enclosure: 3600 kg Space Requirement with Soundproof Enclosure 1.60 m x 2.20 m x 2.80 m Drive System Voltage: 380–660 V Current type: 3-phase AC Total power requirement: 6 kW Main drive: AEG, AM 132 MX4, Output 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt: 3, 17 x 2220, Material: Rubber Drive type: Variable drive Pulley width: 65 mm Pulley diameter: 224 mm Special Features Gripper feed Z2 Effective width: 180 mm Soundproof enclosure by sta Schalltechnische Anlagen GmbH The machine is connected to power and can be tested.

Stanje: rabljeno, Leto izdelave: 1978, Pressure: 150 t Fixed stroke: 80 mm Stroke rate: 30–150 strokes/min Column width: 930 mm Installation height (stroke + ram adjustment at top): 400 mm Lateral column opening: 650 mm Bodpfevut Urex Ag Tscw Table area: 880x1300 / 1500x600 mm Through-hole in table: 760x180 mm Table height above floor: 1270 mm Ram area: 920x1000 / 1300x600 mm Weight: 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with steplessly adjustable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed unit As-is, as currently situated, WITHOUT commissioning Price for commissioning (with new control system) on request

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Bcedpfxofxyhfo Ag Tew Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Single-column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Bodsx U Eiaspfx Ag Tecw Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, ram at TDC, largest stroke: max. 469 mm Installation height, ram at BDC, largest stroke: max. 387 mm Strokes: 50–200 strokes/min Main drive motor power: 18.5 kW Power supply: 400 Volts, 50 Hz - Hydraulically operated multi-disc wet clutch and spring-actuated safety brake - Infinitely variable drive via PIV gearbox with crawl speed for automatic stroke adjustment and setup operations - Hydraulic overload protection in ram - Press force and process monitoring via UNIDOR APS - Pneumatic, infinitely adjustable ram counterbalance - Roller feed MABU WE16, 160 x 3 mm, feed length programmable - Centralized grease lubrication - Operating manual and press documentation Includes: Roller Feed Device MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feed control MABU Space requirements eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Leto izdelave: 1977, Stanje: rabljeno, Gripper feeder for eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press - Manufacturer: Raster, gripper feeder from automatic punching press type HR 60 NL-4S - Stroke: mm - Dimensions: see photos - Transport dimensions: 900/640/H620 mm Bodpstigw Njfx Ag Tjcw - Weight: 200 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, moč: 257 kW (349,42 KM), nazivna (navidezna) moč: 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM Diesel TBD 232V12 Installed in container Bcjdpfst S Ny Ujx Ag Tsw

Stanje: rabljeno, Leto izdelave: 1974, Technical details: Bjdpfxeu Icx Ro Ag Tjcw Pressure: 30 t Ram area: 450 x 250 mm Ram adjustment: max. 50 mm (manual) Strokes per minute: 20 – 120 Stroke: approx. 20 mm Stroke adjustment: no stroke adjustment Installation height / working area: 220 – 280 mm Table area usable: 600 x 600 mm Total power requirement: 7.5 kW Machine weight approx.: 5.0 t Dimensions (L x W x H) – Machine: 1.8 x 1.2 x 2.7 m Dimensions (L x W x H) – Control cabinet: 0.92 x 0.46 x 1.4 m Four-column mechanical punching press with feeder unit with operator console Clearances: frame opening front = 350 mm, side = 258 mm