Rezalni mlini

Rapid 35/60

Leto izdelave: 2004, Stanje: dober (rabljeno), Granulator Rapid 3560 KUB – vključno s ciklonom, cevovodi, rezervnimi noži in transporterjem Leto izdelave: 2004 Stanje: V vsakodnevnem delovanju – možen preizkus Naprodaj je dobro vzdrževan granulator Rapid 3560 KUB s celotnim ciklonskim sistemom, cevovodi, transporterjem in rezervnimi noži. Stroj je v neprekinjeni proizvodnji in je možna demonstracija po dogovoru. Paket vključuje: - ciklon - cevovod - transporter - rezervni noži Gisdpfsx Eld Ssx Afqel Popolnoma delujoč sistem – pripravljen za uporabo Dodatne informacije: Leto izdelave: 2004 Možen preizkus pred nakupom Prodaja se v dobrem delovnem stanju

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible. Godpfxetyyn He Afqeil

Stanje: pripravljen za uporabo (rabljen), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Godpfjvtwuajx Afqjil Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to changeover to wheel loader All service and lubrication intervals have been fully documented and carried out in accordance with the inspection log! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil and oil filter changed every 250 operating hours. Only B0 diesel fuel has been used (no B7). Immediately available - fully operational Location: Austria, near St. Pölten

Stanje: rabljeno, Tehnički detalji: Merni opseg Y-osa: Visina: 0 - 600 mm Interfejs: RS232 Težina: 24 kg Potrošnja energije: 43 vati Potrebni prostor (širina x dubina x visina): 0,237 x 0,448 x 1,013 m Giodjxcvqnjpfx Afqel Visokoprecizni merni uređaj za visinu Linear Height sa staklenom skalom za visoku tačnost. Sa LCD ekranom i tastaturom. Radi se o stonom uređaju. Putem tastera (lebdeći prekidač), glavni uređaj se može lako i polulebdeće pomerati po mernoj ploči. Klizač može izvoditi automatske i ručne pokrete. Uključuje ekscentrični taster sa kuglom Ø 4,5 mm na vrhu. Izlaz podataka RS-232C interfejs Merni klizač vođen je valjkastim ležajevima, pokretan motorom i/ili ručno Merni sistem – stakleni merni sistem (metoda reflektovanog svetla) Dovod komprimovanog vazduha putem ugrađenog kompresora Upravljanje preko komandne table (sa grafičkim prikazom) Sa granitnom pločom, bez stola

Stanje: rabljeno, številka stroja/vozila: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3-blade rotor Gjdpfx Asghgq Nsfqjil 2 rows of stator knives Feed opening approx. 300 x 280 mm Drive motor 11 kW With soundproof enclosure, soundproof hopper, and extraction fan

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Labelling system for round and square canisters Stainless steel frame 170 mm wide slat chain conveyor (optional wider available) Giedpfx Asu Ia E Iofqjl Standard label width 140 mm or 190 mm, optionally up to 260 mm Label length 300 mm, optionally longer Dispensing speed up to 30 m/min, optionally 50 m/min Product diameter (subject to technical approval) from 20 mm to 170 mm, other sizes available on request Touch screen display with memory function Label applicator with three-dimensional adjustment Product separation with double-sided belts Product orientation for square bottles Top belt guidance for square and oval products Additional labelling options available such as top labelling, seal labelling, bottom labelling, etc.

Stanje: novo, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 Up to 20 kg payload (optionally 25 kg) and 👉 Palletizing height up to 2 m → Robot base and control elements → Pallet frame for 2 Euro pallets → FJM vacuum gripper for packages, execution according to customer requirements → Innovative palletizing software → Palletizing system, firmware, and software with the latest updates → Customized design according to customer specifications We offer various configurations of our palletizing system depending on customer requirements. 💶 For detailed pricing information on the cobot palletizing system with a 20 kg payload, please refer to the comprehensive price package (see attached PDF-German 👉 8136716.pdf) Giodpfoi Emapsx Afqel The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for 20 kg payload, optionally upgradeable to 25 kg payload with DOOSAN ❗ For logistical reasons, delivery is only available within the DACH region and countries bordering Austria. HYDRA cobot palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), vrsta goriva: dizel, barva: rumena, obratovalna teža: 14.500 kg, Leto izdelave: 2014, obratovalne ure: 10.800 h, številka stroja/vozila: DCH145R6NEE6E1274, Oprema: hidravlika prijemala, kabina, Kratkozadni bager z kleščami za les. Na voljo so priključki za namestitev žlice, žlica pa ni priložena. Prosim za kontakt preko e-pošte. Zanesljivo se vam oglasim. Gsdpfx Ajwdgx Uofqjil Če pustite telefonsko številko, vas pokličem nazaj.

Stanje: dober (rabljeno), Leto izdelave: 2008, Deli, ki jih roka kaže, niso vključeni. 12.000 o/min X 610 mm Y 420 mm Z 450 mm Gjdouc Tpgopfx Afqjil

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 15.000 h, Stopnja kompresorja Atlas Copco po obnovi. Gsdemzbdwjpfx Afqoil