Kompaktni rezalni mlini

Rapid 3028 KB

Leto izdelave: 2025, Stanje: novo, Granulator MVZ 7.5 kW Demonstration machine available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts and for size reduction of wood chips. Further details available after testing with your material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suited for numerous size reduction applications. For example, defective parts and sprues from injection molding machines that need to be recycled. At the blow molding machine, in addition to defective parts, flash and start-up waste from hoses are processed. Materials such as blow-molded PET bottles, PE/PP bottles, canisters or buckets, and pipes can be processed. The material is fed from above via a hopper into the granulation chamber. The rotor inside is equipped with cutting blades. Material is shredded between the rotating blades and the stationary knives mounted in the chamber housing until it falls through the screen located below the rotor as defined regrind. *Option: The regrind is usually conveyed pneumatically into big bags, silos, or other containers. The price applies only to the granulating plant as shown in image 1. Fan, cyclone, and filter available as options. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *extremely dependent on screen size and material Application example: PE 1000 plastic size reduction Feed material: approx. 40 mm chip length Secondary grinding down to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) For G 30 wood chip secondary processing, much higher throughputs are possible – up to a maximum of 400 kg/h with a 10 mm screen (metered feeding e.g., via conveyor or auger). Further details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor blades, each 225 mm 4 stationary blades, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction connection: 100 mm Screens: 6, 8, and 15 mm – further screen options available Price per screen: €390 Spare blade set: €679 Suitable for: - Plastic waste of all types Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, scrap from injection molding, small bottles, cables, small pipes, profiles, etc. Ksdpfx Aed N Dn Dsbhond --- Larger systems available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Feed opening: 620 x 400 mm Special net price: from €24,995 net *optionally with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Feed opening: 620 x 500 mm Special net price: from €29,795 net *optionally with matching extraction/conveying system --- For configuring the machine, the following information is required: - Length x width x height of the feed material? - Screen size, final particle size required (mm)? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos are also helpful

Stanje: rabljeno, številka stroja/vozila: 11647, Rotor knife rows: 3 Stator knife rows: 2 Rotor width: 280 mm Rotor diameter: 280 mm Infeed dimensions: 300 x 300 mm Knodpsghgqzjfx Abhod

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: FANUC Model: 310is-WA Glavni pogon Število osi: 5 Kjdpfsv Rr Rdjx Abhend Pomik Pomik po X-osi: 600 mm Pomik po Y-osi: 400 mm Pomik po Z-osi: 310 mm Pomik po V-osi: 200 mm Pomik po U-osi: 200 mm Obdelovanec X-dolžina obdelovanca: 1050 mm Y-širina obdelovanca: 775 mm Z-višina obdelovanca: 300 mm Dodatna oprema Vsa dodatna oprema s fotografij je vključena Vključena je digitalna dokumentacija Ta 5-osni žični erozimat FANUC Alpha 1ID je bil izdelan leta 2008. Omogoča natančno in učinkovito obdelavo zahtevnih kovinskih komponent. Če iščete visokokakovostne EDM zmogljivosti, razmislite o stroju FANUC Alpha 1ID, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe EDM (erodiranje)

Stanje: rabljeno, številka stroja/vozila: 12248, Rotor diameter: 300 mm Rotor width: 600 mm Knedpfxoh Dxtfe Abhjd 3-knife rotor 4 rows of stator knives Feed opening approx. 300 x 600 mm Drive motor: 37 kW

Stanje: rabljeno, številka stroja/vozila: 11481, Rotor diameter: 300 mm Knedpfx Abeghgmzjhjd Rotor width: 600 mm 3-knife rotor 4 rows of stator knives Feed opening approx. 250 x 600 mm Drive motor 37 kW

Stanje: zelo dobro (rabljeno), a truly unique one-off piece, approx. 12 x 6 m Kodpfxofi Tmco Abhsnd

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 6.7 [kW] - Spindle speed: 10,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 [mm] - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 [m/min] - Feed rate (X/Y/Z): 1 - 30 [m/min] - Distance from table to spindle nose: 330 - 630 [mm] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 21 - Tool change time: 0.8 [sec] TABLE - Table size: 800 x 400 [mm] - Max. table load: 250 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 9.5 [kVA] Kodevt Eifepfx Abhsnd WEIGHT AND DIMENSIONS - Space requirement: 2,050 x 2,220 [mm] - Machine height: 2,497 [mm] - Machine weight: 2,400 [kg] ACCESSORIES - Control: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Rotary table type: 4th CNC axis integrated * Coolant tank * with high-pressure pump - Internal coolant supply (IKZ) - Electrical transformer

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible. Knodpfstyyn Hox Abhod

Stanje: novo, Leto izdelave: 2025, Genie GS2646 NEXT GENERATION E-Drive scissor lift, new, used, demonstration machines available Kjdpfx Abjrnnc Rehjnd

Leto izdelave: 1996, obratovalne ure: 24.222 h, Stanje: dober (rabljeno), This injection moulding machine from Dr. Boy is currently available at Plastima Used Machinery in their equipment warehouse. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M Ksdpjpwh Akefx Abhond – Year of manufacture: 1996 – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T – Operating hours: 24,222