Večnamenska žaga Caterpillar

Raimann K-23 250/120

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Dsdpfx Abst Tqy Eeveup Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 4.131 h, Oprema: pogon na vsa štiri kolesa, * Driver’s suspension seat Djdpfx Ajrbcw Aebvsup * Exhaust behind the cab * Shunting coupling ---Superstructure: ROPS driver’s cab (heated), rear window heating, Komatsu 4-cylinder diesel engine, 50 kW, 20 km/h, articulated steering, hydrostatic drive, hydraulic quick-coupler system, 2 additional hydraulic connections, max. dump height: approx. 2,420 mm. Accessories: 1 m³ bucket/weight: 422 kg, pallet fork with 2,500 kg lifting capacity. Sale only to traders. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, purchase orders, and sales negotiations are subject to our General Terms and Conditions (see Legal Notice).

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Večlistna žaga Cosmec SM100 Djdpfxjyngw Rj Abvsup Širina gosenice: 240 mm Višina reza: 100 mm Maksimalni premer žag: 300 mm Luknja žag: 60 mm Proti-povratne zapahke Hitrost podajanja nastavljiva z variatorjem Glavni motor z močjo 11 kW

Stanje: zelo dobro (rabljeno), Kataloška številka: 7548 TEHNIČNI PODATKI širina gosenice: 250 mm širina valja: 250 mm max. premer diska: 350 mm premer odprtine diska: 80 mm maks. višina reza: 120 mm širina mize z odprtino: 700 mm dolžina mize: 1790 mm *z zgoraj: zaporke pritisni valj, gladek zaporke pritisni valj, gladek valj z žagami gladi pritisni valji: 2 kos eze: Dujdpfx Asyaq Hgobvop vodilo drseči valj, gladek zaporke gosenica centralno mazanje pogonski motor: 1,1 kW glavni motor: 30 kW električno dviganje ohišja ročni dvig valja z žagami premer izsesovalnega nastavka: 160 mm skupne mere dolžina/širina/višina: 2250x1700x2000 mm teža cca: 3000 kg – nemška proizvodnja – električno dviganje ohišja in valja – brezstopenjska regulacija hitrosti pomika – rabljena večlistna žaga, zelo dobro stanje Neto cena: 68.900 PLN Neto cena: 16.400 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih tečaja)

Stanje: zelo dobro (rabljeno), Catalogue number: 7805 TECHNICAL DATA - Track width: 340 mm - Shaft width: 340 mm - Disc bore diameter: 80 mm - Upper shaft fitted discs: 350 mm - Lower shaft fitted discs: 300 mm - Maximum cutting height: 200 mm - Minimum workpiece length: 700 mm – Top section - 2 rows of kickback preventers - Smooth, slip, pressure roller - Kickback preventers - 2 smooth, slip, pressure rollers - Saw shaft - 3 smooth pressure rollers – Bottom section - Track - Saw shaft - Track - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down body lifting - Manual saw shaft adjustment - Central lubrication Djdpfx Aboxvb Sdsveup - Outlet diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5000 kg ADVANTAGES – Made in Germany – Double shaft – motors 2 x 55 kW – Used multi-blade saw, very good condition Net price: 178,900 PLN Net price: 42,590 EUR (based on exchange rate 4.2 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)