Tri čeljusti chuck

RÖHM

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Hfsdpfx Aexdc Upef Tob Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Stanje: novo, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 Hfedpfx Aed R Uz Tjf Tsb Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm

Leto izdelave: 2024, Stanje: novo, Machine was installed at the customer's site but was never commissioned—NEW and comes with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC cutting system featuring a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automated handling and positioning of slabs—ideal for kitchen countertops, architectural components, and complex cutting tasks. Highlights: - Monoblock construction – no foundation work required, quick commissioning - 5 interpolating axes – for complex geometries, angled cuts, and recessed pockets - Suction system – automatic repositioning and optimized cutting sequence without operator intervention - Switching table – parallel setup during main operating time - Camera and CAD import functions – for efficient nesting processes and material yield optimization Hfedpfx Afswthlnj Tjb - Automatic tool changer with 10+2 tool positions - SPINDLE MOTOR ISO40, 8000 RPM - Handwheel - Blade alignment unit - Vein matching – perpetual license - Linear, fixed tool magazine ISO 40 with 10+2 tool storage slots - Saw blade head Ø400 mm with ISO 40 tool interface - Max. saw blade head Ø600 mm - Automatic lubrication system for GENYA - ISO 40 tool holder for milling cutters and drills - Thickness gauge - Camera system - Suction lifters up to 500 kg - Automatic table changer with tilting table Includes installation and training. Machine available at short notice.

Leto izdelave: 2015, Stanje: rabljeno, Dimensions (L x W x H): 700 x 655 x 1,400 mm Filter surface: / m² Hfedpfjgr Rkxjx Af Tob Number of filter bags: 1 pc. Number of chip collection bags: 1 pc. Weight: 140 kg with control box and start-stop sensor

Leto izdelave: 2024, Stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Hodpfx Afsftdh Io Tsfb Further information is available upon request.

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Hfedpfxsxddamo Af Tsb Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: dober (rabljeno), Leto izdelave: 2002, Cutting diameter: 320 mm Saw blade length: 4160 mm Hfodpfx Aev Htimjf Teb Cutting width: 610 mm Maximum cut-off length: 500 mm Vise (clamping device): max. 620 mm Infinitely variable saw blade speed: 15–120 m/min Working height: 760 mm Saw blade dimensions: 4160 x 34 x 1.1 mm Control: Siemens Siematic OP3 Total power requirement: 2.6 kW Machine weight: approx. 1.96 t Space required: approx. 2.55 x 2.45 x 1.5 m Well-maintained automatic mitre band saw with Siemens Siematic OP3 control system for part quantity and cut-off length, hydraulic frame vice, infinitely variable saw blade speed. The saw can be operated either in fully automatic cycle or in manual single-cut mode. Previously used for small batch production with narrow parts—ONLY approx. 3 hours per week! Estimated operating hours: 3400. WIDE cutting capacity at 90° flat of 610 mm! Simple mitre adjustment Cutting capacity at 0° / 90° - round: 320 mm - flat: 610 x 320 mm Cutting capacity at 75° - round: 320 mm - flat: 350 x 200 mm Cutting capacity at 60° - round: 300 mm - flat: 300 x 200 mm Cutting capacity at 45° - round: 260 mm - flat: 250 x 180 mm Cutting capacity at 30° - round: 160 mm - flat: 150 x 150 mm Please note: Original price approx. €28,000—German-made machines are considerably more expensive! This is a used machine, therefore we sell it under exclusion of any warranty. STOCK-HOLDING DEALER WITH OWN 1,600 m² WAREHOUSE.

Stanje: novo, – Polavtomatska – Hidravlična – 2 hitrosti – Dvojni poševni rez – Tlak rezanja hidravlično nastavljiv – Hlajenje – List žage 2730 x 27 x 0,9 mm Hedpfx Aeh Razfsf Tofb – Nožni krmilnik – Nujna zaustavitev – Dokumentacija – 400V

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: - Površina stiskanja: 2.200 × 1.100 mm - Število cilindrov: 4 - Največji pritisk stiskanja: 60 ton - Izvedba: 1 etaža - Grelne plošče: zlato eloksirane energijsko varčne plošče ELKOM - Odprtina: 350 mm - Priključna moč: 14 kW - Premer bata: 80 mm - Delovni tlak: 365 atü Hsdpfx Afowpm I Hj Tofb Mere: 2.600 mm × 1.250 mm × 1.750 mm Dobavljivost: takoj Lokacija: Röllbach

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Hfodpfx Aot D D Nzef Tob Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg