2023 ProGrinder namizni brusilni stroj

Q-FIN ProGrinder

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Hsdpfed Ev Upjx Ab Esfd Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Hfodpfx Aovc Hk Nob Ejd Colour: beige/green

Leto izdelave: 2018, stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Kljukasta stroj za peskanje, 250 kg TOSCA TS-250 Tip: Kljukasta Največji premer obdelovanca: 1000 mm Največja višina obdelovanca: 1500 mm Največja teža obdelovanca: 500 kg Širina odprtine stroja: mm Število turbin: 2 Hodjvpgq Nspfx Ab Ejfd Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 7,5 kW Maksimalni pretok turbine: 105 kg/min Tip transportne tirnice: Y Tip čistilca: zračno čiščenje Temelj: ne potrebuje Zaščita ohišja: Mn + guma Potreben pretok zraka: 3.000 m³/h Največja instalirana moč: pribl. 19 kW Skupna teža stroja: 0 kg Skupna širina stroja: mm Skupna višina stroja: mm Skupna dolžina stroja: mm Stroj je v postopku celovite obnove. Vsi poškodovani deli bodo zamenjani z novimi, turbine popolnoma obnovljene. Novo barvanje v odtenku RAL 7037/2000. Stroj bo dostavljen v stanju PRIMERLJIVEM Z NOVIM! !!! STANJE KOT NOVO !!!

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) Hfsdpfslgvkiox Ab Ejd - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: novo, Special promotion price for stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: New Hfjdpfxsfnr Aij Ab Eod Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact wheel Ø x width: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output (S1 100%): 3.0 kW Motor input power (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension via spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Quick-release system included for fast belt changes - Easy adjustment of parallel belt tracking via adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the sanding belt Scope of delivery: - Abrasive belt K 80 - Flip-up protective shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate emergency stop button - Base frame

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000 Hfodpfjd Ixadex Ab Esd

Stanje: rabljeno, Visokotlačni viličar, ročni stapler, ročni paletni viličar LOGITRANS tipa LF 1001 / 1600 Dvigni za orodje, voziček za menjavo orodja Serijska št.: 051E04006100 Leto izdelave: 2005 Nosilnost: 1000 kg Dvižna višina: 1600 mm Dolžina vilic: 600 mm Dimenzije platforme: 800 x 650 mm Skupna dolžina: 1200 mm Skupna širina: 800 mm Višina stroja: 1930 mm - Dvig s pomočjo mehanske hidravlike, črpalno gibanje z volanskim ročajem - 2 dvižni hitrosti ca. 36 ročnih potegov ročaja za dvižno višino 1600 mm ali ca. 10 potegov za 10 cm dviga. - premičen s potiskanjem ročno - kratke vilice z montirano odlagalno ploščo za obdelovance - stabilno vodenje vilic v enojnem drogu - Idealno za opremljanje strojev z orodjem ali obdelovanci Hfsdsdz Spmopfx Ab Eod Lastna teža: 198 kg zelo dobro ohranjen

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg Hfsdpfjt Hw Iisx Ab Eed E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 30 h, Oprema: centralizirani mazalni sistem, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Tube Laser Cutting System – The Ideal Entry-Level Solution. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for craft businesses, metal fabricators, and more, this laser is designed for those looking to take their first steps into tube laser processing. It offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your manufacturing process with precise cuts and user-friendly technology—adding true value to your business. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm Hjdpjrkntcsfx Ab Esfd - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Max. tube diameter: Ø250 mm - Max. square profile dimensions: 160x160 mm - Max. rectangular profile dimensions: 200x150 mm - Min. tube diameter: 16 mm - Max. material length: 6000 mm - Min. remnant length: 65 mm - Discharge length: 3000 mm - Semi-automatic unloading unit: Optional (6 m) - Max. material weight: 58 kg/m - Max. total workpiece weight: 350 kg - Supported profile types: round, square, rectangular, elliptical - Open section types: I, C, L - Max. open section dimensions: 240x240 mm Dynamics: - X-axis: 40 m/min - Y-axis: 94 m/min - Z-axis: 30 m/min - A-axis: 510°/s Accuracy: - Positioning accuracy: ±0.2 mm - Positioning repeatability: ±0.05 mm - Tube center detection with capacitive sensor: Yes Available Configuration Options: LASER POWER OPTIONS: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head ADDITIONAL OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar air) - CNC bevel cutting head (+/- 45°) - Semi-automatic front loading system - Discharge table (6 m) with conveyor belt - Discharge table (3 m) with conveyor belt - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud license + D-Mobile + Smart Watch - STEP importer