Stroj za površinsko brušenje

PROTH PSGS 3060 BH / S+

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Travel distances X/Y/Z: 900 x 400 x 200 mm Fedpfxev Irwre Aa Hegk Table size: 800 x 400 mm

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Fedpst Hwu Asfx Aa Hegk Year of manufacture: 1999 # 1099 ----- Max. workpiece diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: zelo dobro (rabljeno), Swing diameter over bed 320 mm Centre distance 800 mm Spindle speeds up to 4000 rpm Control: HEIDENHAIN Manual Plus M Various accessories Fgjdpji Ezhqjfx Aa Hsk MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Fgsdpfx Aaet Hwwqo Hjk Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Fgjdeia Rtdepfx Aa Hok Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. Fsdjqt Dmyopfx Aa Hogk The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 used surface grinding machine Make: Elb Model: Smart NG STC Serial No.: 511210608 Control system: Siemens Simatic Multipanel Touch Fsdpfx Aasv T Rhae Hegk Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Maximum vertical travel: 475 mm Maximum cross travel: 370 mm Machine weight: 3,800 kg Machine dimensions (L/W/H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z axis Dressing unit with compensation/diamond dresser, height adjustable by 22 mm Wet grinding system with coolant pump, 50 l, automatic paper band filter, 60 l Travel measurement in Y/Z axis via rotary encoder

Stanje: dober (rabljeno), Leto izdelave: 1986, 1 used universal cylindrical grinding machine Model: SA 5 /630 Year of manufacture: 1986 Centre height: 140 mm Swing over bed: 280 mm Centre distance: 630 mm Fedpfjul Agbex Aa Hogk Table speed: 0.05 - 6 m/min Coolant system Weight: 4.5 t Technical data subject to change/errors excepted.

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Fedpfjt Tqrnsx Aa Hsgk Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter

Stanje: dober (rabljeno), Leto izdelave: 1990, 1 used surface grinding machine Manufacturer: Rosa Model: ER 10 Year of manufacture: 1990 Technical Data Travel: 1000 x 600 mm Magnetic chuck: 1000 x 600 mm Maximum grinding height: 400 mm Longitudinal feed speed: 2-30 m/min Cross feed speed, stepless: 0-3 m/min Grinding spindle speed: 1450 rpm Grinding wheel dimensions: 400 x 60 x 127 mm Fjdpfx Aouuik Sea Hegk Grinding wheel motor power: 7.4 kW Dimensions (LxWxH): 3900 x 2050 x 2400 mm Weight: 6 t