Varilna miza

Protec KT 5000 HV

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Welding Positioner Protec KT 5000 HV Complete set including hand and dual foot remote controls Digital speed display Hydraulic height adjustment Dimensions: min. tilted height: 800 mm max. tilted height: 1900 mm min. horizontal height: 1050 mm max. horizontal height: 2000 mm Ffjdpfx Aoficr Ueflst Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.7 rpm.

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Rabljena hidravlična stiskalnica tipa H, 700 ton, naprodaj Proizvajalec: Muller Kapaciteta (ton): 700 Število batov: 2 Mere mize (x-y/mm): 4000×2200 Mere drsnika (x-y/mm): 4000×2200 Hod (mm): 1400 Svetla višina v zgornjem položaju (mm): 1920 Moč nasprotnega pritiska (tona): 400 Ffedpfshcfzkex Aflst Hod nasprotnega pritiska (mm): 500

Stanje: novo, Leto izdelave: 2024, nosilnost: 5.000 kg, Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Ffodpfel Dq U Uox Aflet Rotational speed from 0.01 to approx. 0.9 rpm CE certification

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Ffedpfxom Ew Sts Aflet Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Ffsdpfxog Tdpgj Afljt Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Leto izdelave: 2025, nosilnost: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 800 mm (tilted to center), max. height 1400 mm Fedpencfvhefx Afloft Min. horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length Fjdpfxod Ab H Hj Afljft • Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2025, The drill-milling machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. Various accessories can be mounted on it. HEAVY DUTY, STABLE CAST IRON CONSTRUCTION THE MILLING HEIGHT IS ADJUSTED VIA THE SUPPORT, NOT THE COLUMN ROBUST, HIGH-PRECISION CROSS TABLE FOR MILLING/DRILLING, PRECISELY GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION DUE TO GROUND GEAR WHEELS LEFT AND RIGHT SPINDLE ROTATION ROTATING HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an option – 200€ Technical data MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING: 80 mm MAX. CYLINDRICAL AND FACE MILLING: 28 mm MAX. THREADING: 12 mm SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE END TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP Fsdpfx Asud H Hujflsft VOLTAGE (two options available): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available accessories MK4/B18 drill chuck arbor Service tools Drill chuck 3-16 mm/B18 Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual in Polish

Stanje: zelo dobro (rabljeno), Sandblasting machine De Laurentiis model 100 TS, year of manufacture 2002 Fodjrxr Rgepfx Aflsft

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Ffodpefg E Hlofx Aflot Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice