Krožna žaga za lahke kovine in aluminij

ProfiFeed Technologies A550 Semi-Automatic Aluminium Saw

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. Ffsdpfjfg E Hpex Aflot - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: zelo dobro (rabljeno), Leto proizvodnje: 1991 Model: ITPS III Fodpfxewq Dpqo Aflsft Serijska številka: ITPS 80C 25 P1C226 Maksimalna stisna sila: 1800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se vklopi, vendar krmiljenje ne reagira na ukaze. Prejšnji uporabnik je zamenjal originalno krmiljenje AMADA z DELEM.

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° - Saw head tilt adjustment for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm - Weight approx.: 180 kg Ffsdpfx Ajwq N Sweflst

Leto izdelave: 2026, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PVC TEK KAFALI ÜRETİM GRUBU, • Sağlar mogućnost proizvodnje 40 - 60 prozora u radnom okruženju od 8 sati. • Naš set, sa raznim opcijama mašina, pruža najpovoljniju cenu za kupca. • Dostupne opcije za 380 volti ili 220 volti. • U skladu sa CE (evropskim) standardima. • Isporuka na adresu sa cenama za sve delove sveta. • Stari kupci iz vaše zemlje mogu vam poslužiti kao reference. SADRŽAJ MAŠINSKOG SETA • SC101 S Mašina za varenje jednog ugla • SC 211 Mašina za podešavanje srednje letvice za aluminijum & PVC (2 noža) • SC 301 Mašina za sečenje PVC lajsni ili SC 301 S Mašina za sečenje lajsni za aluminijum & PVC bez kalupa (primenljiva na 12 različitih lajsni) • SC 401 Mašina za donje sečenje aluminijuma & PVC-a (uključuje Ø450 mm testeru) • SC 501 Mašina za bušenje ručke, otvaranje kanala i odvod vode za PVC ili SC 502 S Mašina za bušenje ručke, otvaranje kanala i odvod vode za aluminijum & PVC (sa visokofrekventnim motorom) • SC 601 Mašina za čišćenje uglova PVC-a (3 noža) Fsdpfx Aorc H Hfofljft

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Ffjdpfsizkhvox Afljt Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Ffodpfx Ajgwt S Toflst Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Completamente automática para el corte de perfiles de aluminio medianos y grandes con automatización de fácil uso. Coloque cualquier perfil de aluminio; la máquina lo detectará automáticamente y procederá a cortarlo según los trabajos asignados, utilizando un posicionamiento de material de alta precisión mediante servomotor. Entrada de listas de corte Excel vía WIFI para facilitar la carga de grandes listados de cortes. Para cada perfil de aluminio que coloque para cortar, independientemente de la longitud, un sensor láser mide su tamaño. Nuestro potente algoritmo de optimización calcula al instante el mejor orden de corte para minimizar el desperdicio. La máquina corta automáticamente la lista calculada sin detenerse. No requiere ninguna intervención del operador, simplemente continúe cargando nuevas barras de aluminio. Alternativa sencilla y de alta velocidad a las sierras de doble cabezal. Solo ingrese (o importe) las longitudes y ángulos necesarios y presione GO. La máquina produce de forma continua sus piezas anguladas, con precisión y a gran velocidad. • Operación de corte totalmente automática con alimentación de barras y corte a medida. • Interfaz de usuario sencilla para operación automática: ingrese el trabajo y corte en segundos. • Corte simplificado de piezas, lotes o grandes listados de trabajos en Excel. • Corte y conteo de paquetes de barras/multibarra. • Entrada remota vía WIFI de listas de trabajos Excel con amplias capacidades de mapeo de datos. • Velocidades de corte de sierra y avance de barra ajustables para máxima productividad. • Modo de optimización automática con medición láser de longitud de barra y optimización para mínimo desperdicio (opcional). • Impresión automática de etiquetas para piezas utilizando datos de la lista de trabajos (aplicación manual de etiquetas, opcional). • Impresión en línea directa sobre el material sin acción del operador (opcional). • Impresión o escaneo de códigos de barras o QR para ingreso de trabajos (opcional). • Posicionamiento automático por servomotor del ángulo de inglete de la sierra hasta ±75° (opcional). Alta idoneidad para: • Fabricación de ventanas y puertas • Fabricación de estructuras de aluminio ingleteadas • Fabricación de estructuras de aluminio fabricado • Fabricación de composites • Fabricación de persianas, estores y mobiliario • Comercio minorista de aluminio Modelo: A550 Longitud: 9 m Unidad lineal: ProfiStop Alpha Longitud de material: 8580 mm Ffjdpfx Asf Eknnefljt Capacidad de empuje: 20 - 40 kg Software: Optimizador MAQUINARIA DE CALIDAD FABRICADA EN AUSTRALIA.

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame Ffsdpfxjd Szf Ne Afljt High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • V skladu s standardi CE. Fsdpfx Aeramrzofljft • Namenjen za rezanje aluminijastih in PVC profilov. • Hidro-pnevmatsko rezanje. • Prilagoditev hitrosti rezanja glede na profil. • Možno rezanje pod fiksnimi koti desno in levo: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 stopinj. • Pnevmatski vertikalni in horizontalni stiskalec. • Aluminijasta žaga z diamantno konico Ø600 ali Ø650 mm. • Na voljo valjčni transporter (3 metre desno in levo). • Sistem za pršenje olja. • Natančno rezanje zahvaljujoč 3 kW motorju in Hydro-check systemu. • Možnost dela z digitalnim merilcem.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 1997, Connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, tiltable to both sides 45°, height adjustment via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, roller conveyor on the right with stop, cutting length: 3,200 mm, roller conveyor on the left with stop, cutting length: 2,200 mm. Ffjdpfx Aewhn T Usflst