Oprema za označevanje

Printmark LT-120

Leto izdelave: 2018, Stanje: novo, Brand new freeze dryer. Pilot plant. Capacity: 1 kg product / 8 h. Effective area: 0.15 m² Raw material per 8 h: 1 kg. Final dry product per 8 h: 0.2 kg. Drying temperature range: 30°C-100°C. Material: Stainless steel 304. Maximum vacuum pump capacity: 13 m³/h Water removal capacity: 0.8 kg Giedpefn Iudjfx Afqol Final condensation temperature: -40°C Freeze dryer dimensions: 1.1 m × 0.7 m × 1.5 m

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Gedpjd H Sc Esfx Afqjil Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Giedpfx Ajhw Ng Ijfqel Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: KU 2400, Stroj za odstranjevanje sredice zelja omogoča izrezovanje sredice iz glave zelja ali, pogosteje, drobljenje stebla (s tem se omogoči 100-odstotna izraba surovine, kar pozitivno vpliva tudi na kakovost kislega zelja). Pogon je kombiniran električni in pnevmatski. Gijdjffwfyspfx Afqol Splošne značilnosti: - Vsi materiali, ki so v stiku z izdelkom, so iz živilsko varnih materialov - Zmogljivost do 2400 glav na uro - Dve liniji za odstranjevanje sredice - Primeren za obdelavo tudi nepravilno oblikovanih glav zelja - Enostavno čiščenje, možnost pranja z vodo pod nizkim pritiskom - Opcijsko možno opremiti s kolesi z blokado za lažji transport - Lahko deluje samostojno ali v liniji z rezalnikom zelja SS80, zmogljivosti 7500 kg/h - Po naročilu so možne različne električne povezave in standardi

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gisdpsdnxydofx Afqsl Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.900 mm, skupna širina: 1.500 mm, skupna višina: 2.300 mm, skupna masa: 1.500 kg, vhodna napetost: 400 V, Cup filling and sealing machine Make: Food Dosing Packing Machines SP. Z.O.O. Model: PAK 5.0, Machine no.: 457 Year of manufacture: 2015 Voltage: 400 V, 3 Ph Power: 7.5 kW Air pressure: 6-8 bar Gijdpfx Ajv Abm Ejfqjl Weight: 1500 kg 2-lane cup denester Dimensions: 4900 mm x 1500 mm x 2300 mm.

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: Gisdpfx Afoh Eibaoqsl For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Bluhm Weber Legi-Air 4050 labelling machine Further units in stock! Year of manufacture: 2016-19 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Stamping sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm, Label lengths must be accordingly limited. For certain label materials, longer or smaller labels are possible with special tampers. Label gap: Giedpfsfp A I Esx Afqol Minimum 3 mm Label roll: 300 mm diameter, up to 450 running metres, 76 mm (3") core, outer winding (optional inner winding) Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm, Applies to systems with 250 mm stroke Controller display: Multilingual operator guidance 5.7" VGA touch display Service interval indicator Recall, edit and save label data USB port for storage device or keyboard Compressed air connection: 6 bar – compressed air must be clean, dry, and oil-free.

Stanje: novo, Table length: 2200 mm Gijdevn U D Ispfx Afqel Table width: 1500 mm Lifting height: 1900 mm Load capacity: 3000 kg Total power requirement: 1.5 kW Lifting speed - upwards (unloaded): 55 s Lifting speed - downwards (unloaded): 30 s Connection voltage: 400 V Machine weight: approx. 0.65 t Space requirement: approx. 2.2 x 1.5 x 0.3 m The hydraulic lifting tables are electrically powered and operated. Equipped with a safety contact strip for secure lowering operation. Highly versatile for workshops, assembly departments, loading docks, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007,