Prima Power Laser Genius + 1530

Prima Power Laser Genius + 1530

Stanje: novo, zadnji prislon: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge - Foot pedal - Rear photocell safety guard - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation Lhodpfegg N Hbex Aacjc - Weight: 1800 kg - 400V

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available Lodpenh R Ekjfx Aacjhc • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Ljdpekh Niqsfx Aacjhc Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Lhodpfx Aaeh Etf Recsc Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) Lhjdpfx Aji Ai E Rjacoc - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: novo, Working width: 4010 mm Bending capacity (St42): 2.0 mm Adjustable bending angle: 0 - 135° Adjustable bending beam stroke: 25 mm Hydraulic motor power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-resistant, heavy-duty machine body is designed for extremely high loads. This ensures consistently high quality in your bending products. The integrated tool holder allows for quick and easy tool changes, enabling the AKB folding machine to be easily adapted to future requirements. Model description: - MIKRA-Bending Control positioning system type 'M15S' (alternative control options available) - Heavy, torsion-free steel welded construction - Bending beam adjustable from 0 to 135° - Upper and bending beam hydraulically driven - Upper beam clamping pressure centrally adjustable from the front on both sides - Manual crowning adjustment of upper, lower, and bending beams - Segmented upper beam / upper beam incline 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lhsdpfep Dufzjx Aacoc Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - Triple foot switch - Control valve for hydraulic pressure adjustment from the front - Foot pedal with three functions, handgrip, and emergency stop button - Light barrier - Filled with oil - Documentation - CE mark

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, 1.1 TECHNICAL DATA 1 x Waterjet Cutting Machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet Cutting Head for AWJ Abrasive Waterjet Cutting 1 x Fixed Cutting Head for AWJ Abrasive Waterjet Cutting 2 x SM3000 Feed Units 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling Unit with Control Cabinet 1 x Hose Reel with Spray Nozzle 1 x Tool Kit 1 x Machine Zone Guard 1 x PanelOne HMI Operating Interface "EDGECUT" 1 x Remote Control for High-Pressure Pump 1 x Remote Maintenance 2 x Diaphragm Pumps and 2 x Extraction Units 1 x Waste Container 1000 l 1 x Pressure Vessel 200 l or 2-Ton Online Abrasive Conveyor/Online Abrasive Tank 1 x Head Protection Package (Zero Point Probe 1) Lhjdpfoxgua Ajx Aacsc 1 x IGEMS 5X-CAM 1 x MPG, Portable Handheld Control Device 1 x Rotary Unit SS (Chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table Size (W x D): 4200 x 2275 mm - Machining Area (W x D): 3980 x 2010 mm - X-Axis Travel 2D: 3530 mm - X-Axis Travel 3D: 3220 mm - Y-Axis Travel 2D: 2010 mm - Y-Axis Travel 3D: 1405 mm - Z-Axis Travel: 250 mm - Positioning Accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid Traverse X: 30,000 mm/min - Rapid Traverse Y: 15,000 mm/min - Rapid Traverse Z: 5,000 mm/min - Minimum Distance between Nozzles: 450 mm - Maximum Distance between Nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical Connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic Supply Volume (incl. Pressure Vessel): 500 l/min • Pneumatic Supply Pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP Pump Data: - KMT 50, Jetline, 4100 bar - 37 kW, Circuit Breaker at 400/50 Hz, 80 A CAD/CAM Software: - IGEMS Professional

Stanje: rabljeno, Leto izdelave: 1999, Pressure 180 t Bending length 3100 mm Frame gap 2550 mm Throat depth 310 mm Stroke 200 mm Approach speed 80.0 mm/sec Working speed 10.0 mm/sec Return speed 58.0 mm/sec Installation height 385 mm Lodjxab Erepfx Aacehc Table width 240 mm Working height 885 / 1050 mm Oil capacity 180 ltr. Total power requirement 15.0 kW Machine weight approx. 9850 kg Dimensions L-W-H 4200 x 1750 x 2450 mm From a maintenance workshop Well-maintained condition (!!) - in inspected condition - machine video - ?v=o_t9BBMsNNs Equipment: - Simple, conventional electro-hydraulic press brake * with torsion bar for upper beam parallelism - Electric rear stop with ball screw spindles (X axis) * with 4x manually adjustable stop fingers * Fine adjustment via front handwheel, with analog position display - Electro-motorized adjustment of the depth of penetration (Y1+Y2 axis) * with digital position display - Pivotable control panel, mounted on left side - 1x set of upper tooling - 1x rotatable MULTI V universal die block 125x125 mm - 2x front / movable support arms - 1x freely movable two-hand/foot control - Operating manual (PDF)

Stanje: dober (rabljeno), Leto izdelave: 1978, številka stroja/vozila: 11.542, Offer 24559 Technical Specifications: - Max. working width: 1100 mm - Max. cutting capacity (with 400 N/m² tensile strength): 20 mm - Cutting angle: 1° 30′ - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs: 7 pcs - Manual back gauge: 10 – 1000 mm - Front angle gauge Lhodpfsvmmrujx Aacjc - Front support arms - Strokes per minute: 13 - Drive: 400 V / 45 kW - Table height: 700 mm - Space requirement incl. back gauge, excl. front support arms: approx. W 2100 x H 2250 x D 2250 mm - Weight: approx. 7500 kg - Equipped with: - Electric foot switch - Cutting line illumination

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, lastna masa: 18.490 kg, dvižna višina: 10.000 mm, tip droga: teleskopski, Leto izdelave: 2016, obratovalne ure: 4.614 h, skupna dolžina: 6.140 mm, prosto dvigovanje: 1.100 mm, gradbena višina: 2.990 mm, dolžina vilic: 2.400 mm, širina nosilnega okvirja vilic: 2.480 mm, vrsta pogona: Diesel, nosilnost: 13.000 kg, gradbena širina: 2.510 mm, Rigid telehandler Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO Class 4 = 5,000 – 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Pneumatic Front tire size: 17.5 R25 Front tire condition: 60 – 80% Lodpfjt Dd Hajx Aacjhc Rear tire type: Pneumatic Rear tire size: 17.5 R25 Rear tire condition: 60 – 80% Description: Full cab with heating and air conditioning, road lighting similar to StVZO, 3rd + 4th hydraulic functions to the fork carriage, joystick control. Sideshift, fork positioner, hydraulic sideshift, hydraulic fork adjustment (adjustable opening width inner edge to inner edge = 610 mm – 1,950 mm) 3rd hydraulic function, 4th hydraulic function, rear work lights, heater, diesel particulate filter, full cab, air conditioning, interior mirror, exterior mirrors, joystick, windscreen wiper, seat,