Koekstruder za mehki PVC

Politsch PCO-30

Leto izdelave: 2011, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1006882, Koekstruder za mehki PVC Lodpfx Abexgh Itebsrg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch en senzor tlaka taline krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje Lrsdpfx Aouxa Abjbbeg ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Lredpfxoiyyf Is Abbsg Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 2024, Stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel Lrsdehx Elfspfx Abbsg The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2000, Stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Lodpfxeduyyzs Abbsrg

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Lrjdeg Ezarepfx Abbog - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2023, Stanje: skoraj kot novo (rabljeno), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [min-1]: 10–192 Screw: nitrided Torque: 55 Nm Ledpoq R Tkwofx Abbjrg Drive: Three-phase motor with frequency converter Drive power [kW]: 1.1 kW Barrel material: nitrided Electrical connection ratings: 3 / N / PE Supply voltage [V]: 400 V at 50 Hz Control voltage [V]: 24 V Ceramic heating bands [W]: 1200 W Number of heating bands: 3 Max. throughput: approx. 5 kg/h Max. processing temperature [°C]: 300

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / take-off unit - Control system Ledpfx Aerg Ebcjbberg

Stanje: rabljeno, številka stroja/vozila: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-knife rotor, 2 stator knife rows Infeed opening approx. 260 x 260 mm Drive motor 5.5 kW Lrjdpfx Asghgl Ijbbog Granulator with integrated feeding device for bar stock. Weight approx. 500 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HABERMEHL Anlagenbau GmbH Naslov: Hauptstr.1, 35510 Butzbach-Ebersgöns, Nemčija Tip: EH 400/1 Serijska številka: 901 Letnik: 2004 Napetost / frekvenca: 400 V / 50 Hz Nazivna moč: 3 kW CE-certifikat: Da 🛠️ Opis naprave Industrijski drobilnik oz. granulator (shredder/granulator). Značilne lastnosti na fotografijah: Sistem z rotacijskimi noži (drobilna enota) na 2-mm gredi 3 kW SEW motor z reduktorjem 8 mm sito (na situ označeno: „8 mm Sieb“) – določa velikost izhodnih delcev Premična, transportna konstrukcija Posoda za izpust materiala in spodnja motorizacija Lrjdpfxow Niuhj Abbsg Takšni stroji se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Lahki kovinski ostružki Elektronski odpadki 📝 Tehnične informacije, ki jih lahko zahtevate Za dodatne informacije se lahko pri dobavitelju ali proizvajalcu pozanimate za naslednje podrobnosti: