PVC PROIZVODNA SKUPINA Z ENO GLAVO

PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ PVC TEK KAFALI ÜRETİM MAKİNE SETİ

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, delovna višina: 2.000 mm,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • V skladu s CE standardi. • Stroj lahko reže pod kotom +45, -45 ter vmesne kote. • Hitre nastavitvene omejitve za 90, 75, 60 in 45 stopinj • Ročica za pritrditev mize za vmesne kote • Pnevmatski sistem za vpenjanje profila, praktična uporaba. • Premer diamantne žage je Ø400 mm. • Standardno opremljena z merilnim in transportnim trakom (po 2,5 m na levi in desni strani) Gsdpfx Aeramzuefqoil • Hladilna naprava za rezanje aluminijastih profilov • Možnost dela z digitalnim metrom OPCIJA • Valjčni transportni sistem (po 3 m na levi in desni strani)

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Giodsxdc Upepfx Afqol Very little used, inspection on site possible.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, barva: drugo, Leto izdelave: 2025, Oprema: hidravlika, kabina, BS-25 betonski stroj za izradu blokova je izjemna rešitev za obrate, ki proizvajajo betonske bloke, opeke, tlakovce in bims, saj ponuja visoko učinkovitost in prilagodljive proizvodne zmogljivosti. Stroj, razvit skladno z modernimi proizvodnimi koncepti, zahvaljujoč enoslojni zasnovi omogoča enostavno izdelavo različnih izdelkov, kot so tlakovci, robniki in votli bloki s pomočjo različnih kalupov. Zaradi prilagodljive zasnove objekta lahko investitorji svojo proizvodno kapaciteto hitro in ekonomsko povečajo glede na potrebe. Popolnoma avtomatski PLC krmilni sistem BS-25 omogoča, da celoten proizvodni proces upravlja le en operater. Nadzorna plošča na dotik z LCD-zaslonom zagotavlja pregled in tiskanje proizvodnih podatkov v realnem času preko uporabniškega vmesnika s sodobnim sistemom poročanja. Z oddaljenim dostopom je možen nadzor sistema prek LAN-a ali internetne povezave, kar omogoča hitro prepoznavanje morebitnih okvar in posodobitev programske opreme na daljavo. Ta pametna avtomatizacija zagotavlja konstantno kakovost in maksimalno proizvodnjo v vsaki izmeni. Gjdpjxp Uurefx Afqjil BS-25 – Tehnične specifikacije betonskega stroja za bloke: Produktivnost: 110–120 palet/uro Dimenzije palet: 1.200 x 980 x 230 mm Krmiljenje: PLC avtomatizacijski sistem (Schneider) Kapaciteta bunkerja: 1,5 m³ Kapaciteta hidravličnega olja: 500 litrov Zgornja vibracija: 3 kW x 2 Spodnja vibracija: 4 kW x 4 Skupna električna moč: 150 kW Skupna moč vibriranja: 30.000 Zmogljivost v 8 urah: 10.000 betonskih blokov / 25.000 medblokov Zakaj izbrati BS-25 stroj za izdelavo betonskih blokov? CONSTMACH izstopa v proizvodnji strojev za izdelavo betonskih blokov, opek in tlakovcev zaradi zanesljivosti, kakovosti tehnične rešitve ter poprodajne podpore. Model BS-25 zmanjšuje vaše proizvodne stroške ter povečuje kapaciteto z energetsko učinkovito zasnovo, dolgo življenjsko dobo komponent in pametnim krmilnim sistemom. Vsak stroj je dobavljen po opravljenih kontrolnih testih kakovosti in ga je mogoče prilagoditi po želji. Za investitorje, ki iščejo visoko vzdržljivost, minimalne potrebe po vzdrževanju in vrhunsko proizvodno zmogljivost, je BS-25 simbol dolgoročne donosnosti in zanesljivosti. Kaj ponuja Constmach? Constmach je vodilni proizvajalec strojev za gradbeništvo in rudarstvo s širokim naborom izdelkov. V portfelju so: stroji za izdelavo betonskih blokov, stacionarne in mobilne betonske centrale, stroji za drobljenje kamna, linije za sortiranje in drobljenje, pralni stroji za pesek, stroji za izdelavo peska, asfaltne baze, transportni trakovi, čeljustni drobilci ter mobilni drobilni obrati. Zaradi visokih kakovostnih standardov, inovativnega pristopa in rešitvam po meri strank Constmach izstopa na domačem in mednarodnem trgu kot zaupanja vredna blagovna znamka. Naši izdelki so zaradi vzdržljivosti, učinkovitosti in dolgotrajnega delovanja prva izbira strokovnjakov v industriji.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 1000 DİJİTAL METRE, • 3 metre dolžina • +/- 0,1 mm merilna natančnost Giodpfx Ajrblaljfqsl • Servomotor (opcijsko) • Opcija decimalnega načina delovanja (zlasti za aluminij) • Opcija merjenja preko Bluetootha (za podrobnosti nas kontaktirajte) • Napetost 220 V • Zaslon na dotik • Funkcija pomikanja naslona nazaj z enim gumbom za enostavno odstranjevanje izdelka iz kalupa • Uporabniku prijazna zasnova • Enostavna kalibracija

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: 210186, vrsta goriva: dizel, Število prevoženih kilometrov: 94.035 km Lastna teža: 3.300 kg Dvižna zmogljivost: 200 kg Delovna višina: 1.600 cm Stanje sprednjih pnevmatik: 80 Stanje zadnjih pnevmatik: 80 Največji vodoravni doseg: 1.100 m Transportne mere (D x Š x V): 5,7x2x3,2 Za več informacij se obrnite na skupino PFEIFER. Gijdpfxetr Nyks Afqol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machine condition is excellent, having completed only 123,000 cycles. CNC-controlled automatic machine designed for processing welded frames. Independent drive and control system. Multiple operations performed within the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional shop floor space Can be adapted for operation in a sash line All processing operations are performed during the cooling phase: - Drainage - Ventilation grooves - Ventilation bores in colored profiles Giodpfem Ak R Usx Afqjl - Drilling of frame for mullion connector - Hinge drillings in the frame (x6) The center is equipped with its own transfer system for moving frames from the welder to the cleaner SPS, NC control User-friendly visualization interface

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Giedsd Rzc Ropfx Afqsl Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, For sale: Glaston UC 1000 glass cutting table. The machine is in very good technical condition, has been regularly serviced, and is ready for operation. Ideal for precise cutting of glass of various thicknesses. Gedpfjur U Tyox Afqsil

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, • Fully automatic cutting machine designed for cutting PVC and aluminium profiles, both straight and at angles, using a double-head Ø600 mm saw. • Hydro-pneumatic saw movement with hydro-check control • Cutting accuracy of +/- 0.1 mm • High precision thanks to backlash-free gearbox • Automatic adjustment to two internal angles at 90° and 45° • 15" Windows-based industrial PC • Diamond-tipped saw blades 2 x Ø600 mm • Servo motor drive system • Saw blade projection distance: 215 mm; profile cutting capacity: 70 mm x 3 profiles • Hydro-check saw speed adjustment • 9.5 metre cutting capacity • 90° block slicing feature • Multi-language support • Conveyor profile support unit • Motion-sensitive support arm • Profile support unit between cutting heads • Spray-type saw cooling system • 2 vertical clamps • 4 horizontal clamps OPTIONAL • Barcode printer Giedpfx Afjramy Teqsl • Transfer of cutting lists via USB flash drive