PIOVAN regulator temperature THW118-F (2021) regulator temperature

PIOVAN temp controller THW118-F

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750) Fedpferthkusx Aazsgk

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Schließkraft 80 Tonnen Fjdpfx Ajpdr Aijazegk Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm

Stanje: pripravljen za uporabo (rabljen), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment Machine is disconnected / No cooling water connection Machine is professionally stored Technical specifications: Clamping force: 800 kN Mounting plate dimensions (mm): 610×610 Tie bar distance (mm): Mould height (mm): 250 Platen opening (mm): 750 Control system: MC4 Display language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil filling volume (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available upon request. Fedpfsu Ti Srox Aazogk

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K Fjdpfxsg Ey Ufj Aazogk - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Refrigeration units Brand: Ers Model: SC 110. V/5 Power: 8 kW Year of manufacture: 2000 Fgsdsd I Tlhspfx Aazek

Leto izdelave: 2005, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Twin parallel screws, diameter 85 mm, 17 L/D Fgsdpfx Aaeuziyhszok - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, operating pressure min./max.: 2bar/8bar, minimum filtration rating: 5µm, max. glycol content: 25%, dry air output: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions (L/W/H): approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection possible. Fsdsuk I Etepfx Aazjgk

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A high-temperature tube furnace from Thermconcept is available. Max. temperature: 1700°C, heated length: 200 mm, tube diameter/length: 60 mm/600 mm, power: 3.3 kW, dimensions (W/D/H): 460 mm/530 mm/830 mm. Documentation available. Fedpfx Aastxb Avozjgk

Stanje: novo, Leto izdelave: 2018, Specific cooling capacity 20550/42°C Qa Coolant R134a/1430 Refrigerant Pressure 20 bar Total power requirement 14.5 kW Machine weight approx. 186 kg Space requirement approx. 0.5 x 0.5 x 2.1 m The models of the HYFRA Gamma series are designed as immersion coolers for the cooling of water, oil, and emulsion. The plug-and-play immersion coolers are ready to install and can be used with just 0.5 m² of floor space, making them ideal for integration into various machine layouts. Cooling capacities of up to 28 kW are possible thanks to the compact design with only 0.5 m² footprint. This provides significant flexibility advantages when planning production floor layouts and leads to increased productivity, as more production machines can fit into the available space. In the compact models of our immersion coolers, the condenser is installed horizontally. This construction method significantly reduces heat dissipation. Internal components remain unaffected by waste heat. A robust agitator ensures a consistent medium temperature in the lubricant tank for all immersion cooler models in this series. For regular maintenance, the HYFRA Gamma series can be easily lifted out of the tank using fixed crane lugs. Immersion coolers: High-performance cooling directly at the application How does an immersion cooler work? With immersion coolers, the evaporator of the cooler is placed directly into the cooling medium. The liquid is held in a tank and is continuously and vigorously circulated for efficient cooling, with powerful agitators supporting this process. For which applications are immersion coolers suitable? Immersion coolers are often used for temperature control of cooling lubricants in filtration and mechanical engineering to ensure the performance of the connected equipment. They are also used in metalworking, indirectly cooling tools and workpieces. Typical applications include milling and grinding with CNC machines or conventional machine tools. Immersion coolers with advanced controls and comprehensive features Depending on the cooling capacity, HYFRA Gamma model immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of the FreeAdvanced control system and a touch panel provides structured overviews and easy reading of relevant values. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced control system also features a full-text display and supports Modbus TCP. Fgjdpfoul Ekpsx Aazok

Leto izdelave: 2023, Stanje: novo, Ekstruzijska linija Coperion ZSK 27 MV Plus Uporaba: Farmacija, zobne gumijaste bombone Leto: 2023, nikoli uporabljena, še vedno v originalni embalaži. Fsdpfx Aasxr Hgxjzegk