Sušilnik granulata

PIOVAN Granulattrockner

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and immediately ready for operation before delivery. The robot comes complete with: Nkedpfx Aewlz Dbog Tou - Control cabinet - Teach pendant - Connection cables

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Nksdpfxswd Tx Uj Ag Tou Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2010, obratovalne ure: 29.000 h, Stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Njdpfx Agjxykcgo Toku Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Nodpfxsh Rawbe Ag Toku Schnecke: 22 mm Baujahr: 2004 Betriebsstunden: 200

Leto izdelave: 2022, Stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper. • Support frame. • Heating chamber. • Connection lines. Njdpfevhb S Sex Ag Tjku • Air control valves.

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Nkedpoh Nypfofx Ag Tou

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Njdpeftm Hrjfx Ag Teku HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame Nkodpfxjv Dvlle Ag Tou - Machine frame The unit is immediately ready to weld.

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3063, Rabljeni laboratorijski dvo-vijačni ekstruder Leistritz Micro27/GL-32D, stroj št. 3063 Kataloška št.: DS27 št. 3063 Leto izdelave: 2001 Moč motorja: 10,5 kW Hitrost vrtenja vijakov do 500 obr./min Premer vijakov: 27 mm Ogrevalno/hladilne cone: 7 Območje orodij: 1 Sovrteča dvoja vijaka s gnetilnimi elementi Vijačni elementi so v dobrem stanju. Volumetrično doziranje Brabender, nameščeno na menjalnik in vključeno v dobavo. Dokumentacija v nemškem jeziku na papirju je na voljo. Nksdpfxeyc Sfpe Ag Tju Glava orodja z eno-luknjasto šobo vključena Z atmosferskim odzračevalnim sistemom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Single-Screw Extruder Battenfeld BEX 1-75-30:B with Co-Extruder BEX 1-35-30:B Application: PE, PP Year of manufacture: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW RPM: 2,450 Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency drive – new three-phase motor without carbon brushes and frequency inverter Gearbox overhauled in July 2024 Condition: the extruder is in very good condition Last application: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Year of manufacture: 2010 Condition: the extruder is in very good condition Nkjdpeug Edkefx Ag Tsu The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6 Germany