Laser

Photon Energy Workstation XXL II Piko CEPHEUS 1012

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on configuration): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks, using adaptation accessories. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, rated torque: 3 Nm Ball screw, dia. x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Infinitely variable working feeds, X/Z axes: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, peak power (intermittent): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardised tool holder mounting: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position turret VDI 30 for 6 live tool stations 1 pneumatically operated tailstock, ref. 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 revolving live centre Brucker CM5 1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552 1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550 1 KENNAMETAL ESX-25, without ESX nut 1 EWS ESX-25, without ESX nut 4 left-hand short radial toolholders, form B2, ref. 4100.0100 1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet 1 ditto without EX25 nut 3 tapping collets Ø 4.5 / 6 / 8 mm 1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124 1 ditto, Ø 32 mm boring, ref. 4100.00107 1 ditto, Ø 20 mm boring, ref. 4100.00105 1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108 1 ditto Ø 10 mm, ref. 4100.0109 1 ditto Ø 12 mm, ref. 4100.0110 2 ditto Ø 16 mm, ref. 4100.0111 1 ditto Ø 20 mm, ref. 4100.0112 1 ditto Ø 25 mm, ref. 4100.0113 1 ditto Ø 32 mm, ref. 4100.0115 1 GARANT long, Ø 32 mm 5 steel protection plugs, form Z2, ref. 4100.00130 1 left-hand axial toolholder, force C4, ref. 4100.00103 1 pneumatically operated tailstock CM5, ref. 180-65.200 1 support stand for microscope, ref. 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT Except in the case of error or omission, these technical details are provided without obligation. Gsdszb U Epjpfx Ad Ijui

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 30.000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Delivery TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current consumption: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle nose: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm Travel X-axis: 89 mm Travel Z-axis: 406 mm Rapid traverse X-axis: 28 m/min Gjdoxflprepfx Ad Ijui Rapid traverse Z-axis: 38 m/min Tool turret: 12 stations VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF DELIVERY Including (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw measuring probe Exact scope of delivery according to the photo documentation The CNC lathe Hardinge Quest 6/42 SP, equipped with Fanuc 16i/18i/21i control system from the year 2007, is a highly precise machine for a wide range of turning operations. It features a robust A2-5 spindle nose, a 42 mm bar capacity, and a 150 mm chuck, allowing for flexible machining of various workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be reliably processed. The axes offer generous travels of 189 mm (X) and 406 mm (Z), as well as high rapid traverse rates for increased productivity. The 12-position VDI-30 tool turret with an extremely short indexing time of 0.1 seconds ensures fast tool changes and minimizes downtime. Thanks to its rugged construction and proven Fanuc control, the Hardinge Quest 6/42 SP is ideal for series production where high precision is required. No liability is assumed for the correctness, completeness, or currentness of the information.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, OMAX 2652 är en kompakt och högpresterande abrasiv vattenskärmaskin som används av verkstäder och tillverkare världen över tack vare sin hastighet, precision och pålitlighet. TEKNISKA SPECIFIKATIONER Arbetsområde: 1 320 x 660 mm X-axelns rörelse: 1 320 mm Y-axelns rörelse: 683 mm Z-axelns rörelse: 150 mm Max. skärhastighet: 4 572 mm/min Skärtolerans: ±0,025 mm Max. arbetsbordslast: 1950 kg/m² (400 lbs/ft²) Drivsystem: Slutna digitala drivsystem, borstlösa servomotorer Linjärrörelse: Förspända kulskruvar, cirkulerande kullager Muntycke: OMAX MAXJET 5i Z-axel: Programmerbar motoriserad Mjukvara: Intelli-MAX® Suite (integrerad CAD/CAM) Rördragning: Saxmodell i stål – inkapslade högtryckskomponenter Vattennivåreglering: Rapid Water Level Control – nedsänkt skärning under 80 dBA Gsdpfx Adey Na U Hs Ieui VIKTIGA FUNKTIONER • Skär i princip alla material – metaller, rostfritt, aluminium, koppar, mässing, sten, glas, kompositer och plaster • Ingen värmepåverkad zon – ingen deformation, ingen oxidering, inget sekundärt efterarbete krävs • Inga verktygsbyten – minimalt med uppspänning, snabb installation • Miljövänlig – använder endast vatten och naturlig granatsand • Litet fotavtryck – passar utmärkt i verkstäder med begränsat utrymme • Obegränsad utbildning under hela maskinens livstid ingår Skick: Fabriksny Leverans: Sverige och Danmark Service & reservdelar: Fullt supportutbud tillgängligt Kontakta oss för prisuppgift och mer information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Boschert Brushing Deburring Machine Model K3 for deburring straight sheet metal edges and at the lateral aggregate suitable for cut-outs and notches up to 70 mm depth as well as outside radii on sheet metal. 3 motors, each 1.5 kW Brush diameter: 300 mm Brush material: wire brushes VA/steel Material thickness range: 0.8–8 mm Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Base frame: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is guided through the machine. For heavy burrs, the motors can be switched to operate together so that both remove the heavy burr from above. Gujdpstr Avijfx Ad Iji The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table extension serves as a storage surface.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, High-precision drilling and milling machine Aciera 22 VA Good condition, from school operation Year of manufacture: approx. 1990 Gedehqm D Nepfx Ad Isui Table: 600 x 320 mm Spindle speed: 40 - 3600 rpm Infinitely variable speed adjustment (rpm) 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter: 65 mm Quill stroke: 120 mm Spindle taper: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material: 25 mm Max. drilling capacity up to 30 mm Height adjustment via hand crank Motor: 1.1 kW Lamp Several quick-change holders included Dimensions (W x D x H): 90 x 130 x 185 cm Weight: approx. 800 kg Technical data subject to change.

Stanje: zelo dobro (rabljeno), Clamping range Ø 15–160 mm Gujdpfx Aerry Egjd Isi Max. workpiece weight 15 kg Weight of prism vise 3.0 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, potovalna razdalja osi X: 300 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, skupna višina: 2.290 mm, skupna masa: 3.200 kg, proizvajalec krmilnikov: MAKINO, model krmilnika: MGF, število osi: 3, Ta 3-osna potopna erozijska naprava Makino EDNC 30 je bila izdelana leta 1998. Ima hode 300 mm v osi X, 250 mm v osi Y in 250 mm v osi Z, velikost mize 500 × 350 mm ter lahko obdeluje največjo težo obdelovanca do 500 kg. Izkoristite priložnost za nakup te potopne erozijske naprave Makino EDNC 30. Za več informacij o stroju nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Skupna površina: širina 3000 mm, globina 2800 mm • Moč: 12 kva, 400 v, 12 a • Velikost mize: 500 mm x 350 mm • Število pozicij orodij: 8 • Polirno EDM obdelavo je mogoče izvajati s tem strojem. Dodatne informacije Polirna erozija je možna s tem strojem. Okvarjena vezna plošča (stroj se ne zažene) Gusdpfx Adox U U Hue Isi Dimenzije Globina stroja: 2000 mm

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Cutting range round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping - Hydraulic unit integrated into the machine base - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Gjdpfx Adodzqtge Ioui Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Leto izdelave: 2022, stanje: novo, Pneumatic Tapping Arm Model: R1950-08 Capacity: M2–M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-12 Capacity: M3–M12 Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-16 Capacity: M3–M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 27 kg Collet Interface: TCS 2B Model: R1950-020 Capacity: M3–M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-022 Capacity: M3–M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-027 Capacity: M3–M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Guodpfoipmr Isx Ad Isi Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety clutch adapters of your choice - Mounting column with flange - Radial extension arm (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, skupna višina: 2.648 mm, skupna širina: 5.500 mm, obremenitev mize: 100 kg, skupna masa: 5.500 kg, največja hitrost vretena: 46.000 obr/min, moč vretenovega motorja: 15.000 W, število mest v zalogovniku orodij: 10, teža orodja: 1.500 g, največja dolžina izdelka: 2.700 mm, število osi: 3, This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm, with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and a rapid traverse rate of 90 m/min. If you are looking for high-quality machining capabilities, you should consider the Matsuura LV-500 vertical machining center we offer for sale. Contact us for further details. • Control: L-Tech 30iB • Table: Guodpfxoy Uwv Ee Ad Iei • Size: 540 × 350 mm • T-slots: 18 mm (3 slots) • Table to spindle nose distance: 150 - 450 mm • Spindle: • Taper: BT30 BIG-PLUS • Motor: 7.5 / 15 kW • Maximum torque: 8.86 Nm at 15,000 rpm • Direct drive • Feed Rates: • Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min • Cutting feed: 35,000 mm/min • Minimum increment: 0.0001 mm • ATC (Automatic Tool Changer): • Tool taper: BT30 • Maximum tool diameter: 46 mm • Maximum tool length: 150 mm • Tool-to-tool change time: 2.2 s • Chip-to-chip time: 5.2 s • Precision: • Positioning accuracy: ±0.001 mm • Repeatability: ±0.0005 mm • Power Requirements: • Power supply: AC 200/220V ±10% • Required power: 35 kVA • Frequency: 50/60 Hz • Air pressure: 0.54 - 0.93 MPa • Air consumption: 430 NL/min • Tank capacities: • Coolant: 320 L • Oil cooler: 9.5 L • Oil: 1.8 L • Hydraulic: 25 L • Standard equipment: • Spindle oil cooler • Coolant system • Chip flush • Linear motor cooler • Scale feedback • Air dryer • Synchronized tapping • Work light • Automatic grease lubrication • MIMS system (Matsuura Intelligent Meister System) Technical Specification Taper Size BT 30