Peletirni stroj 22 kW

Pellet machine 22kW Pellet machine 22kW

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri Nljdpfxowp Rqfj Agxea SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Stanje: dober (rabljeno), Diverse Damfdruckventile fra Samson komplet med styreboks! For yderligere oplysninger kontakt os venligst! Nlsdpjirfb Esfx Agxoa DN 20/DN 40/DN 50/DN 65

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 10.120 h, skupna dolžina: 1.800 mm, skupna višina: 1.700 mm, skupna širina: 1.200 mm, Poids à vide : 1 300 kg Prix : Sur demande Destructeur de documents Untha LR 630 Année de fabrication : 2003 Ouverture d'alimentation : 624 x 792 mm Débit : selon le matériau et le tamis Njdpfx Agewh Na Njxela Diamètre du rotor : 248 mm Vitesse du rotor : 86 - 96 tr/min Puissance moteur : 15 kW Système de coupe : 17 couteaux Diamètre du tamis : 24 mm Dimensions de transport : 1800 x 1200 x 1700 mm (L x l x H), poids : 1 300 kg - Année : 2003 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : LR632318 - Heures de fonctionnement : 10 120 - Dimensions de transport : 1800mm x 1200mm x 1700mm (L x l x H) - Poids transport [kg] : 1 300 kg Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Yorick Diebels

Stanje: zelo dobro (rabljeno), CPM 2000 granulator, 90 kW motor, 410 mm die diameter. We have several units available. Nlodpfxowcdpne Agxea

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor Nledpfju Hmacjx Agxea debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Nsdpfopugwisx Agxsla Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Njdpefxgp Ujfx Agxela Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Njdpfx Aodfgg Ijgxela D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: rabljeno, DALLAN Roll Forming Line | 60 mm and 80 mm Omega Profiles Nljdpfexugf Hox Agxea Equipped with 11 forming stations, this roll former is fully outfitted and currently set up for producing 60 mm Omega profiles. The line also includes additional tooling for 80 mm Omega profiles. This machine is complete and in excellent condition. DALLAN roll forming line with 11 forming stations · Sheet width: 300 – 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cut-off station · Current configuration: Set up for classic 60 mm Omega profile, including tooling for 80 mm Omega · Uncoiler: Free-standing · Tool box (approx. 1,000 kg) for production of additional profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Sheet width: 300 – 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cut-off station Current configuration: Set up for classic 60 mm Omega profile, includes tooling for 80 mm Omega.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm Nlodpsw Hg Nlefx Agxoa * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.