Škarje za profilno jeklo

PEDDINGHAUS Peddimaster 60/80

Stanje: rabljeno, Leto izdelave: 1990, Max. punching force: 600 kN Max. shearing force: 800 kN Punches 27 mm holes in 16 mm steel Shears flat steel up to 400 mm length and 16 mm material thickness Hydraulic hold-down device at the flat bar shear Large support table on the punching side with stops Further technical specifications available upon request Comes with a selection of punches and dies as requested Lodpfetmyifox Abbohb Weight: approx. 2,000 kg

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Lsdsd E A I Ijpfx Abbohb Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Leto izdelave: 1990, Stanje: rabljeno, Max. punching force: 600 kN Lhjdpjm T Amuefx Abbjb Max. shearing force: 800 kN Punches 27 mm holes in 16 mm steel Shears flat steel up to 400 mm width with a material thickness of 16 mm Hydraulic hold-down on flat bar shear Further technical data available on request Supplied with a selection of punches and dies as desired Weight: approx. 2,000 kg

Stanje: dober (rabljeno), 16 pieces external turning tool holders 41 pieces internal turning tool holders Lhodpfx Asikn E Hobbjb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.000 mm, skupna masa: 820 kg, nosilnost: 500 kg, The offer concerns the following set: (possibility to customize equipment parameters or to purchase the vacuum lifter or crane separately) - Vacuum lifter for panels, designed among others for: MDF panels, laminated, raw panels, particle boards, etc. (model: WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for the handling of panels - Actuator for tilting between vertical and horizontal positions - 6 suction cups Ø 200 mm - Construction allowing adjustment of the suction cup layout to adapt to different material dimensions - Beam length: 2500 mm - Each suction cup is equipped with a ball valve, allowing for individual disengagement - Compressed air pulse feature to prevent the “sticking” effect of materials - Individual X and Y axis adjustment of each suction cup - Operation from the control console (control panel): - Switching the aggregate on/off - Vacuum supply/release - Electric hoist control via thumb lever – lifting/lowering the lifter - Manometer - Compressed air supply – integrated vacuum generators - Load capacity: 400 kg - Device weight: 100 kg - CE Certificate Stationary Jib Crane Technical specifications: • Column height: 4 m • Clearance under boom: 3 m • Boom length: 4 m • Load capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Any RAL colour available Lhjdpsxln Drjfx Abbsb • Manual slewing of crane • Manual trolley • Quadruple / double roller-bearings on the boom for smooth rotation • Electric chain hoist • CE Certificate INCLUDED IN THE PRICE: • Column-mounted jib crane • Single-phase electric hoist • Manual trolley • CE Certificate • Complete documentation Standard warranty: 12 months

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Used Tietjen GD12 ex ATEX Hammer Mill Including 200 kW 1500 rpm motor (others available upon request) Year of manufacture: 2006 ATEX-compliant execution Lhodsw Dv Aijpfx Abbeb Including DA576 feeder Magnetic separator and air gravity separator

Stanje: dober (rabljeno), Leto izdelave: 2007, Used 3-meter press brake from LVD Lhedpfx Abewz I Raebjb Type: PPEB 135 30 Capacity: 3100 x 135 tons Cadman CNC control Y1, Y2, X, X1, R, Z1, and Z2 axes CNC crowning Angle measurement system (not connected) Wila hydraulic upper and lower clamping

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm Ljdpfx Absg U Uv Rebehb 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 82-540, Offer 18474 Technical Specifications: - Flat bar shear cuts flat bar up to 100 x 18 mm - Blade length approx. 250 mm - Profile steel shear cuts angles: - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar shear cuts: Ljdsg Eubnopfx Abbjhb - Round bar, 90° up to 36 mm - Square bar, 90° up to 30 mm - Notching unit: sheet metal up to 8 mm - Punching station: - Press force approx. 50 t - Throat depth 350 mm - Punches in steel up to 20 mm Ø at 15 mm material thickness - Drive: 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1,900 kg

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Lhodpfx Aju R Szasbbeb Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -