Škarje za profilno jeklo

Peddinghaus Peddimaster 60/80

Stanje: rabljeno, Leto izdelave: 1991, Round steel 35 mm Square steel 32 mm Angle steel 120 x 12 mm Flat steel 400 x 16 / 200 x 20 mm Punching force 60 t Stroke 10 - 27.5 mm Throat depth 410 mm Hsdev Hti Tjpfx Af Tjfb Punching diameter 27 in 17 mm Total power requirement 7.5 kW Machine weight approx. 2000 kg Space requirement approx. 1800 x 800 x 1800 mm Equipment: - Notching unit, punching unit, flat bar shear, angle steel shear - Stop table for punching and notching unit - Length stop 1000 mm - 2x foot pedals - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm Hsdpfx Asq Evn Ejf Tefb - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: rabljeno, Leto izdelave: 1990, Max. punching force: 600 kN Max. shearing force: 800 kN Punches 27 mm holes in 16 mm steel Shears flat steel up to 400 mm length and 16 mm material thickness Hydraulic hold-down device at the flat bar shear Hsdpfxotmyifo Af Tefb Large support table on the punching side with stops Further technical specifications available upon request Comes with a selection of punches and dies as requested Weight: approx. 2,000 kg

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm Hjdpog U Uv Rsfx Af Tefb -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Spindle taper: MK 3 - short quill Distance spindle nose - table: 545 mm (short quill) Distance spindle adapter - table: 395 mm (with MK adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator - Intermediate stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Rotating drill table Hfsdpfeharwvox Af Teb - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space requirement (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Stanje: novo, Leto izdelave: 2025, Folding machines of type ZGR-1400 are robustly designed and built, making them well-suited for processing zinc, aluminum, and copper in common thicknesses. All in all, an excellent choice at an unbeatable price! Standard configuration offers a bending angle of 145 degrees, but at the customer's request, we can also manufacture a folding machine with a 165-degree bending angle. Folding Machine 1400/2.0 incl. transport rollers Hfjdecpn Hbjpfx Af Tjb Technical Data: - Maximum working length: 1,400 mm - Maximum steel sheet thickness: 2.0 mm - Bending beam: 24 mm - Weight: approximately 190 kg (manual machine) - Shearing along the entire working length - Upper beam lift adjustable in three positions - Maximum clear width between beams: 80 mm - Delivery to Germany or Austria: €180 - Optional rotary shear (up to 0.8 mm): €350 - Delivery time: 2–4 days - Cash payment upon delivery - The rotary shear has a maximum cutting capacity of 0.8 mm (steel sheet) - Machine complies with CE regulations and includes a 12-month warranty. We look forward to hearing from you!

Leto izdelave: 2008, Stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg Hjdomidyijpfx Af Tefb

Stanje: rabljeno, Leto izdelave: 1986, Round steel - mm Square steel - mm Angle steel 120 x 13 mm Punching unit: pressing force 60 t Punching unit: throat depth 510 mm Punching unit: capacity (diameter x thickness) Ø 27 in 17 mm Sheet shear: flat material 500 x 14 mm Sheet shear: flat material 400 x 16 mm Sheet shear: flat material 180 x 20 mm Sheet shear: flat material 120 x 21 mm Sheet shear: flat material 100 x 22 mm Total power requirement 7.5 kW Machine weight approx. 2.5 t Space requirement approx. 1.8 x 0.9 x 1.8 m - Hydraulic profile steel shear - combined - Hfjdpfst D Nz Aox Af Tjb

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Hfsdpfx Aev S E Edjf Teb

Stanje: dober (rabljeno), Leto izdelave: 2002, Technical Data Diameter: 700 mm Hjdpev Tzvhsfx Af Tjfb Rectangular: 800 x 700 mm