Stiskalnica - enojni stolpec

PEDDINGHAUS Hydraulic 300

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Iedeg Ip Efjpfx Af Teht Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. Ijdpfx Ajfxyhfof Tsht The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Quantity: 70 items Ihjdpfxowth N To Af Tet Weight: 90 kg Condition: new Hole diameter: 28 mm WMT Set 7: 70-piece set, 28 mm system, consisting of: - 3x Tube screw clamps D28 90° – Art. 4028397 - 3x Tube screw clamps D28 180° – Art. 4028396 - 3x Tube screw clamps D28 45° – Art. 4028398 - 3x Tube screw clamps D28 300x150 – Art. 4028399 - 3x Tube screw clamps D28 300x200 – Art. 4028400 - 15x Ball lock pins D28x50 – Art. 4027663 - 10x Locking pins D28x80 – Art. 4028876 - 4x Universal stop D28 100x50x25 mm – Art. 4028469 - 4x Universal stop D28 150x50x25 mm – Art. 4028470 - 4x Universal stop D28 225x50x25 mm – Art. 4027657 - 2x Universal stop D28 300x50x25 mm – Art. 4027659 - 2x Stop and clamping angle D28 75x50x75x25 mm – Art. 4028657 - 2x Stop and clamping angle D28 175x50x75x25 mm – Art. 4028658 - 2x Stop and clamping angle D28 175x50x175x25 mm – Art. 4028649 - 2x Stop and clamping angle D28 175x50x75x25 mm – Art. 4028652 - 2x Stop and clamping angle D28 175x50x175x25 mm – Art. 4028653 - 2x Stop and clamping angle D28 275x50x175x25 mm – Art. 4028654 - 1x Set of stop and clamping angles D28 300x275x100 mm (1x left, 1x right) – Art. 4028847 - 2x Flat angle D28 175x175x25 mm, 1x slotted hole + 3x round holes – Art. 4028655

Stanje: novo, Leto izdelave: 2025, Swing beam guillotine shear Ihjdpfx Afelac Drj Tst Cutting length: 3100 mm Material thickness (steel): 10 mm Blades suitable for stainless steel Cybelec touchscreen control Back gauge: 1000 mm Cutting gap adjustable via control Delivery time: 3 months

Stanje: novo, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Ihjdpeftd Uaefx Af Tst Table area: 450 mm x 305 mm Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm Iedpfx Afeg Trvrj Tsht This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Amada Togu-EU automatic tool grinder with PLC for sharpening punches and dies for punch presses, complete with accessories. Iodpfx Afet Daiwj Tjht

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery. Ijdpspk Iv Uefx Af Tsht

Stanje: zelo dobro (rabljeno), For sale: well-maintained Helmerding eccentric press. Very little used! Ijdpfxefdnw He Af Tsht

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 031EP-2020, Ref. No. 24558 Technical Data: - Abrasive diameter: 150 mm - Grinding unit can be swiveled on articulated arm - Swivel radius of grinding arm: 2,000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2,200 rpm - Table dimensions: 1,500 x 880 mm - Table height approx.: 920 mm - Drive: 400 V / 3.6 kW - Space requirement approx.: W 1,600 x H 1,600 x D 1,600 mm - Weight approx.: 250 kg Ihjdpfovazz Dsx Af Tot